JANPADH BAGHPAT ME DAULA RAJWAHA KE KM. 3.870 SE KM 4.970 TAK SADAK KE NAVINIKARAN KA KARYA

Providing laying spreading and compacting stone aggregates of 22 40-53 mm sizes to water bound macadam specification including spreading in uniform thickness,hand packing rolling with smooth, wheel roller 60-100 kN in stages to proper grade and camber applying and brooming stone screening to fill up the interstices of coarse aggregates, watering and compacting to the required density Grading 3 as per Technical Specification clause 405 including cost of all material, labour T&p etc, all taxes complete

Providing and applying primer coat with S S 1 grade bitumen Emulsion on prepared surface of granular Base including clearing of road surface and spraying primer @ 0.90 kg/sqm using mechanical means As per MORTH specification Clause 502

Providing and applying tack coat on bitumen surface with using emulson pressure districutor @ 0.20 kg per sqm on the prepared granular surface cleaned with Machenical Broom As per MORTH spefication Clause-503

Providing and laying and rolling of open graded premix carpet of 20 mm thickness composed 13.2 mm to 5.6 mm agregates includingmixing in a H M P, laying with Paver Finisher & rolling with a three wheeled 80-100 KN static roller capacity, finished to required lavel & grades Bitumen VG-30 @ 14.6 KG/ 10 sqmarea for premixing including all taxes Material

Providing and laying seal coat type "B" sealing the voids ina bituminous surface P.C. surface laid to specified levels grade and cross fallusing with coarse sand to Haridwar quarry @ 0.06 cum per 10 sqm with Bitumen VG-30 @ 6.80 kg/ 10 sqm including heating of Bitumen to the required temperature and including all material, labour & T&P etc as per Clause 510 case-III of MORD specificationand as specified and directed by Engineer-in- chatrge.

Earth work in embankment with a lead beyond 200 m and upto 1.00 km including excavation, loading, unloading mannual compaction, dressing and all lifts complete excluding royalty will be applicable from timeto time on Govt. orders

Brick lining on both side of the road of M 150 bricks 7cm wide, 11 cm deep laid mud mud mortar including labour and supply of bricks finishing to the require level and alignment including dressing ramming the excavated earth as directed by engineer in charge.

Scraping of old painted surface including disposal of all scraped material to a distance of 30 m directed by engineer in charge(by mechanical) with all cost of labour, T&P etc. complete.

Road marking with hot applied the thermoplastic compound with reflectorising glass beads on bitumin surface(repeated/transverse bar) providing and laying of hot applied thermoplastic compound 5mm thick including reflectorisng glass beads@250 gram per sqm area thickness of 5mm is exclusive of surface applied glass bead as per IRC 35, 2015 the finish surface to be level uniform and free from streaks and holes.