PROVN OF ALL WEATHER SHED OVER UAC PIT NO. II AT CDO TRAINING AREA OF HQ JL WING, THE INF SCHOOL BELGAUM UNDER GE BELGAUM

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in soft/loose soil, for foundation etc., or for laying of cable/ GI Pipe, shafts, wells, cesspits, manholes, pier holes, etc., complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil, as in soft/loose soil, complete all as specified. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

M&L for Hardcore of gauge not exc. 63mm, broken stone or boulders, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L for Reinforced cement concrete M-25 Grade (Design mix) as in foundations, including footings, foundation beams, plinth beams, bases for columns, basement slabs, and mass concrete or similar items etc., complete all as specified and as directed.

M&L for Reinforced cement concrete M-25 Grade (Design mix) as in Columns, Pillars, Piers, Posts and struts or similar items etc., complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded Granite stone aggregate) as in foundation, filling, mass concrete etc., complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in sub base, complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B1 (using 20mm graded granite stone aggregate) as in floor finished even and smooth without using extra cement, including necessary steel form work, complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded hard granite stone aggregate) as in plinth protection, finished even and fair without using extra cement, including making construction joints in 3metres interval and joint filled with sealing compound, complete all as specified and as directed.

M&L for Glass dividing strips 3mm thick width of strips 38mm and inserted in position to confirm to design, complete all as specified and as directed.

M&L for Reinforcement using TMT bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L for Reinforcement using TMT bars of Grade Fe-500D of 8mm dia and over upto and including 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded complete all as specified.

Steel formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete, complete all as specified and as directed.

Steel formwork to sides of columns, pillars, posts and similar work, square, rectangular or polygonal etc., for rough finished surfaces of concrete, complete all as specified and as directed.

M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, complete all as specified and as directed.

M&L for Rolled Mild steel as in roof trusses (Framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections ) including distance pieces, cleats etc., conforming to grade Fe 410-W Gde E - 250 quality 'A', complete all as specified and as directed.

M&L for Mild steel Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe290 Gde-E-165 complete all as specified and as directed

M&L for Mild Steel work as in hold fasts, wind ties etc., for roof including securing bolts and cutting tops to shape as directed, drilling holes, notching for wire etc ., conforming to Fe-290 Gde- E-165, complete all as specified and as directed.

S&F Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc., confirming to Gde Fe 410-W (Gde-E-250 quality - A) complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) of 11 mm to 15 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 10 cm but not exceeding 15 cm, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

M&L for Preparation of new or previously untreated surfaces of steel or steel based surfaces of any description, not otherwise described, not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note: Quoted rate shall be inclusive of necessary scaffolding/shoring and other safety measures to be undertaken during execution of work.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:4 finished even and fair without using extra cement, complete all as specified and as directed.

M&L for Preparing new surface of wall of any description and applying two coats of cement based paint white or tinted, complete all as specified and as directed.

M&L for Factory made Machine pressed pre-cast concrete interlocking paver block any shape and size with glossy finish on top, confirming to IS 15658-2006 of 80mm thick, M-40 grade with grey cement and no pigment, complete all as specified and as directed. Make: Anjali Tiles / Ultra Tiles Pvt Ltd / Terra Firma / Ecco Scope / Mehtab Tiles

M&L for 50mm thick river sand cushion under interlocking paver block including watering and consolidation, complete all as specified and as directed.

M&L for Preparation of new or previously untreated surfaces of steel or steel based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note: Quoted rate shall be inclusive of necessary scaffolding/shoring and other safety measures to be undertaken during execution of work.

M&L for Point wiring with 1.5 Sq.mm FRLSH PVC insulated unsheathed copper conductor cable, single core multi stranded 1100Volt grade conforming to IS 694: 1977, drawn in and including rigid PVC conduit not less than 20mm bore, concealed/surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, junction boxes, tees, terminal boxes with and including factory made Galvanised Boxes, for mounting switches & sockets etc, covered with 3mm thick laminated acrylic sheet ISI marked, including one run of 1.5 Sq.mm single core FRLS PVC unsheathed copper conductor cable as earth continuity conductor and connected to common earth dolly, for one light / fan /bell point controlled by one way switch/MCB, complete all as specified and as directed. Note: Cutting chases and making good surfaces shall be included in the unit rate. Note: (i) Make of PVC cable :Finolex/Polycab/KEI (ii) Make of PVC Conduit: Presto Plast / Finolex / Avon Plast / Garware

All as per Serial Item No. 30 here-in-before but for 3 pin 5/6Amp switch socket point, on independent board, complete all as specified.

All as per Serial Item No. 30 here-in-before but for 3 pin 5/6Amp switch socket point, on Same board, complete all as specified.

All as per Serial Item No. 30 here-in-before but with 2.5Sqmm copper conductor cable and 2.5 Sqmm cable as earth continuity conductor for 3 pin 6/16Amp switch socket point, on independent board, complete all as specified.

S&F Switch piano type single pole one way 5/6Amp, complete all as specified and as directed. Make : Anchor /Legrand/Indo Asian

S&F Switch piano type single pole one way (multi pin) 15/16Amp, complete all as specified and as directed. Make: Anchor /Legrand/Indo Asian

S&F Socket outlet 5/6 Amps, 3 and 5 pin multipurpose type, complete all as specified and as directed. Make: Anchor /Legrand/Indo Asian

S&F Socket outlet 15/16 Amps, 3 and 5 pin, 5 and 15Amp multipurpose, flush type, complete all as specified and as directed. Make: Anchor /Legrand/Indo Asian

S&F Ceiling rose, 3 terminals PVC/Polycarbonate, 3 phase, isolated body, complete all as specified and as directed. Make: Anchor /Legrand/Indo Asian

M&L for Circuit / Sub main wiring with two runs of 4.0Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 4.0Sqmm as earth wire, drawn through and including rigid PVC conduit of suitable size (minimum 25mm dia), concealed /surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit. Note: (i) Make of PVC cable :Finolex/Polycab/KEI (ii) Make of PVC Conduit: Presto Plast / Finolex / Avon Plast / Garware

S&F Ceiling fan complete with blades, down rod, 3 blade type, including electronic regulator step type and accessories, 230Volt, 1200mm sweep, minimum air delivery 210 CFM with service value 6.0BEE, with brushless direct current motor (BLDC), five star rating, complete all as specified and as directed. Make: Bajaj / Crompton / Orient / Havells

S&F Sheet metal enclosure Vertical TPN DB, 4 ways with IP 54 protection, double door, sheet steel phosphetised powder painted with 200 amps rated copper busbar 415Volt, fixed on sunmica with wall, suitable for MCCB/MCBs, complete all as specified and as directed. Make: Legrand /L&T/Havells

S&F Sheet metal enclosure MCB DB, double door, SPN 12 Way (2 incoming and 12 outgoing), IP-54 protection, sheet steel phospetised powder coated with 200 Amps rated copper bus bar 415 Volts, fixed in concealed position, complete all as specified and as directed. Make: Legrand /L&T/Havells

S&F MCCB TPN 100Amp, 16kA, 415Volt with necessary connecting up in vertical DB, testing and commissioning, complete all as specified and as directed. Make: Legrand /L&T/Havells

S&F MCB SPN 40 to 63Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed. Make: Legrand /L&T/Havells

S&F MCB SP 10 to 32Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed. Make: Legrand /L&T/Havells

Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric power cable [heavy duty] of size 4.0core x 16.00Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., complete all as specified. Make:Gloter/Poly cab/CCI/Universal/Finolex

S&F LED Industrial luminaries tube light fitting 20watt, 220Volt, >100 lum/W, PF>0.95, AC, integrated driver and LED tube light and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified. Make: Philips / Bajaj / Wipro

S&F LED Flood light fitting 100Watts, 230 volts, >100lum/W, beam angle of ǿ 120°, AC outdoor type with high Pressure Die Cast aluminum Housing and heat resistant complete with LED lamp, driver, bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with all accessories, complete all as specified and as directed. Make: Philips / Bajaj / Wipro

M&L for Double wall corrugated high density polymer (SDR 17) of ISI marked 63 mm outer dia and 50 mm inner dia including necessary fittings like couplers,bends,end caps etc with ISI marked (IS 14930- 2001 ), laid in trenches /floors & fixed on wall/ pole with and including necessary fittings such as bends, sockets & other connected accessories etc for laying of electric cables / road crossings etc., complete all as specified and as directed. Make - Duraline /Astral(Rex) / Ketron

S&F GI pipe light grade pipe 40mm dia for cable protection, complete on pole/walls/in road etc for cable protection, complete all as specified. Make: TATA/JINDAL/PRAKASH

M&L for Earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in bothways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire, including testing after completion, complete all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.

Sadhana Constructions & suppliers (BID ID -3188644)

M/s B C CHOUGULE (BID ID -3189134)

M/S ADITYA CONSTRUCTIONS (BID ID -3183821)

SHREESAMARTH CONSTRUCTION (BID ID -3188674)

M/S MAHADEV M PATIL (BID ID -3188530)

SAVAN ENTERPRISES (BID ID -3188576)

M/s. VIJAY ELECTRICALS (BID ID -3188652)