SPL REPAIR OF BLDG NO P-288 OF 3 IDSR, PROVN OF PATHWAY WITH CHEQUERED TILES IN FRONT OF MAIN OFFICE AT 626 SATA BTY AND PROVN OF COMPOUND WALL FOR BLDG NO T-389 OF 503 ASC BN UNDER GE 860 EWS

Amount

Demolition of stone masonry built in cement mortar including all quoins, arches, pillars, etc, but including ashlar facings, dressed stonework and precast concrete articles in any position complete all as specified and directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 using 40mm graded crushed stone aggregates as sub base complete all as specified and as directed.

M&L Precast cement concrete block masonry type C-1 1:3:6 (20mm graded crushed stone aggregate) with solid blocks, exc. 10cm in width and, setting in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on stone/brick wall including raking out joints hacking for key and scrubbing down with water etc. complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 using water proofing compound as per manufacturer's instruction in two layers, finished even and smooth surface without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified.

M&L for preparation old decorated surfaces of walls and applying two coat of oil bound distemper on walls including cornices, pilasters etc complete all as specified and directed.

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of ceilings by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of oil bound distemper on Ceilings complete all as specified and directed.

M&L for preparation new surfaces including chalk whiting, on newly plastered surfaces of walls perparatory to distempering and applying two coat of oil bound distemper on walls including cornices, pilasters etc complete all as specified and directed.

M&L for preparing new surfaces including priming plastered and other surfaces with alkali resistant priming paint and applying two coat of cement base paint complete all as specified and as directed.

M&L for preparing old surfaces of plastered or unplastered surfaces including washing rubbing down and scrapping smoke soot moulds, moss and greasing sports with steel wire brush and applying two coat of cement base paint complete all as specified and as directed.

Taking down chowkats or frame n.exc 1.5 Sqm with shutters without taking of shutter from the frame.

Taking down chowkats or frame exc 1.5 Sqm and n exc 4 sqm with shutters without taking of shutter from the frame.

S&F Plain solid straight chowkats or frame rounded or chamfered put together with glue pined at joints with 2nd class hard wood complete all as specified and as directed.

S&F for 30mm thick 2nd class hardwood Plain, framed, panelled door shutters(any number of panels), with panels of timber flat on both sides(feather edged), veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed.

S&F Glazed and Skelton shutter 30 mm thick 2nd class hard wood open rebated and prepare to receive glass, gauze etc. divided plain chamfered or rounded mitered and rebated sash bars any numbers complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain color PVC sheet re-inforced with MS square tube supplying and fixing in opening all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat molded plain color PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain color PVC sheet for top rail and bottom rail, paneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed in panels including fixing with beads complete all as specified.

M&L for Cutting holes in block wall built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 exc half brick but n.exc one brick complete all as specified and as directed.

S&F flat iron hold fast conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S&F for 150mm extruded aluminium handle complete all as specified.

S&F mild steel butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F Aluminium alloy barrel tower bolt of extruded type 150 mm long complete all as specified and as directed.

S&F for 140 mm over all length of cover plate floor door stopper of aluminium alloy body and tounge, anodized with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F for 100 mm extruded aluminium handle complete all as specified.

S&F mild steel butt hinges medium weight cold rolled mild steel size of hinges 75 mm complete all as specified and as directed.

S&F Aluminium alloy barrel tower bolt of extruded type 100 mm long complete all as specified and as directed.

S&F in repair of 150mm size, Mild steel or stainless steel pressed handles, oval/flat type, stove enamelled black with screws complete all as specified and directed.

S&F in repair of 100mm size, butt hinges, cold rolled steel with screw, medium weight , ISI marked complete all as specified and directed.

S&F in repair of 75mm size, butt hinges, cold rolled steel with screw, medium weight , ISI marked complete all as specified and directed.

S&F in repair125mm long Aluminium anodised tower bolt of extruded section and fixed all as specified and directed.

S&F in repair of 125mm size,Extruded aluminium alloy handles, fabricated type, anodised, oval/flat type, stove enamelled black with screws complete all as specified and directed.

Hacking out old broken glass of any thickness size or quality from steel frames complete all as specified and as directed.

S&F for 4mm thick sheet glass ordinary quality and glazing with aluminium snap beading on aluminium frame for door/window and ventilator in square n exc 0.5 sqm each complete all as specified and directed.

S&F in repair of 300mm long, Mild steel or stainless steel, sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed

M&L for preparation of old painted of wood or wooden surfaces and applying two coat of synthetic enamel paint on surface of any description over 10cm width or girth complete all as specified and directed

M&L preparation of untreated new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified

M&L for 15mm thick screed bedding in cement mortar 1:6. for laying floor finishes receiving floor tiles complete all as specified and as directed.

M&L for 10mm thick backing coat of brick/concrete surface in cement mortar 1:4 complete all as specified and directed.

M&L for Coloured jointless Non-skid Ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tiles complete all as specified and as directed.

M&L for Coloured glazed ceramic tiles of size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or color cement complete all as specified and directed.

S&F in repair PVC 10 litres, valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with 32 mm dia flush pipe connecting to squatt pattern etc. ISI approved complete all specified and directed.

S&F in repair vitreous china water closet (Squatting pan) “Orissa” pattern of size 580x440mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed.

S&F in repairs vitreous china Wash hand basin, white, flat back size 550 x 400mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32mm size bore of pipe complete all as specified and directed.

S&F in repair for Vitreous China bowl type urinals, size of 465x355x265mm white(minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe) complete all as specified and directed.

S&F in repair stop valves 15mm bore chromium plated, cast copper alloy screwed down high pressure with capstan head handle screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repairs bib taps 15mm dia cast copper alloy with capstan head handle screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs complete all as specified and as directed.

S&F in repairs PVC connection 15 mm bore 450mm long with screwed socket of brass on both ends and rubber washer complete all as specified and as directed.

S&F in repairs LDPE (Low density polyethylene pipes) of pressure rating 6Kg/sqcm 32mm dia waste pipe as in wash basin complete all as specified and as directed.

S&F in repair of soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated Tubular Towel rail 20 mm dia D type 60 cm long .

Taking up and down GI tubing and connection including cleaning for re-fixing or removing to store 15mm bore of pipe

Taking up and down GI tubing and connection including cleaning for re-fixing or removing to store 20mm bore of pipe

S&F 20mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge.

S&F 16mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and as directed.

Demolition of concrete (reinforced) in ground floor and paving etc in exc 15 cm thick below or above GL complete all as specified and directed.

M&L for Providing precast cement concrete type C-1 1:3:6 (20mm graded aggregate)in landings, cover slabs (for manholes etc.) chullah hoods , chajjas,water troughs ,mangers, shelves and similar articles with plain faces complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L mild steel TMT bars 6mm to 8mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, PVC or re-inforced concrete) set in cement mortar internal dia of pipe 150 mm complete all as specified and as directed

M&L PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregates as in 150mm bore of pipe in concrete bed to drain pipes including packing under and haunching against the sides of pips after they are laid and tested complete all as specified and directed.

S&F 150 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 150mm dia bore PVC (SWR) bends complete all as specified and directed.

S&F 150mm dia bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed.

Dismantling of cast iron SWR pipes from any position of 100mm dia complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm dia all as specified and directed.

S&F 110 mm dia PVC (SWR) Bend any radius all as specified and directed.

S&F 110mm dia PVC (SWR) branch pieces double( double Y) equal or unequal all as specified and directed.

S&F 110mm dia PVC (SWR) junction single ( single T) equal or unequal all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B-1 all as in repairs specified and directed.

S&F PVC(SWR) gully trap 110mm, setting and jointing with solvent cement all as specified and directed.

S&F 110mm PVC(SWR) WC connector with lip ring complete all as specified and directed.

S&F 110mm PVC(SWR) WC connector bent type complete all as specified and directed.

Surface dressing n.exc 30 cm deep and averaging 15 cm deep and getting out hard dense soil complete all as per specified and as directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundsation, laying of pipes/cable/poles etc., and getting out Hard/dense soil complete all as per specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as per specified and as directed.

M&L for Cement concrete type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as per specified and as directed.

M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface in broken stone or boulders complete all as per specified and as directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregates) as sub base complete all as per specified and as directed.

M&L Screed bed or bedding layer of mortar cement mortar 1:4, 15 mm thick for laying floor finishes complete all as specified and directed.

S&F Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments in floor finishes complete all as specified and directed.

M&L for painting lines, dashes, arrows, letters, etc on roads, pavements and the like exc 10 cm wide with road marking paint white, black and golden yellow with adequate nos of coats complete all as specified and directed.

Returning filling in soil, including spreading levelling watering and well ramming in layers not exceeding 25 cm thick in each layer complete all as specifed and as directed.

M&L Rendering 15 mm thick in cement mortar 1:4, surface finished even and smooth without using extra cement all as specifed and directed.

S&F for wall cladding stone n.exc 0.10 Sqm and 12 to 16 mm thick of any colour and pattern as approved by GE set and jointed in neat cement slurry and popinted in white or coloured cement to match the colour of stone complete all as specified and as directed.

M&L for providing, cement concrete type B-1, 1:2:4 ( using 20 mm graded crushed stone aggregate ) as in coping including formwork ( straight or curved) and finishing ( Reinforcement shall be measured and paid separately) complete all as specified and as directed.

S&F Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Preparation new steel and iron surfaces of any description over 10 cm in width or girth, priming with a coat of red oxide primer and applying two coats of synthetic enamel paint complete all as specifed and directed.

M/S BHAT ENGINEERS

M/S MOHD KARIM

M/S STANZIN NOBROO

M/S MUNEER HASSAN AKHON

M/S GEE AAR and SONS ENTERPRISES

BETONG BUILDERS

M/S GHULAM MOHAMMAD CHATAPA