REPAIR MAINT OF REWIRING OF INTERNAL ELECTRIFICATION INCL REPLACEMENT OF ELECTRIC WORKS OF MD AND OTM ACCN AND LT OH LINES, LT UG CABLES, FEEDER PILLAR BOX, STREET LIGHT MCCBS AND EXTERNAL WATER SUPPLY SYSTEM, CLEANING OF WATER TANK AND DISTRIBUTION

Amount

Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash all as required complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with concealed Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification complete all as specified and directed .

One light/fan point controlled by one switch complete all as specified and directed .

One 5 pin 5/6 Amp socket on the same board complete all as specified and directed .

One 5 pin 5/6 Amp socket on independent board.complete all as specified and directed .

One 3 pin 15 Amp socket independent but with 2.5 sq mm PVC insulated unsheathed copper stranded conductor and 2.5 Sq mm size PVC insulated stranded copper conductor as earth continuity conductor complete all as specified and directed .

One bell point controlled by one push button switch complete all as specified and directed .

All as per item No. 2.00 Above but including modular metal box with modular cover plate of following point wiring :-

One light fan point controlled by one way switch complete all as specified and directed .

One 5 pin 5/6 Amp socket on the same board complete all as specified and directed .

One 5 pin 5/6 Amp socket on independent board complete all as specified and directed .

One 3 pin 15 Amp socket independent but with 2.5 sq mm PVC insulated unsheathed copper stranded conductor and 2.5 Sq mm size PVC insulated strended copper conductor as earth continuity conductor complete all as specified and directed .

One bell point controlled by one push button switch complete all as specified and directed .

S & F switch piano type 240 V, 5 Amp , Sp one way flush type complete all as specified and directed .

S & F bell push 240 V, 5 Amp , Sp one way flush type complete all as specified and directed .

S&F socket 5 pins, 6 Amp, flush type piano (multi purpose) complete all as specified and directed .

S&F Socket 15 Amps flush type 230 Volts , AC complete all as specified and directed .

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed .

M&L regulator Electronic type 240 Volt single phase suitable for ceiling fan step type complete all as specified and directed .

S & F modular switch 1 way 6 Amp, 1 module, 240 V flush type complete all as specified and directed .

S & F modular switch 1 way 16 Amp, 1 module, 240 V flush type complete all as specified and directed .

S & F modular bell push, flush type, 6 Amp, 1 module, 240 V complete all as specified and directed .

S & F modular socket, 6A-2/3 pin combined, 2 module, 240 V complete all as specified and directed .

S & F modular socket, 6Amp / 16Amp-2/3 pin combined, 2 module, 240 V complete all as specified and directed .

S & F modular fan step regulator, 120 W, 2 module, 240 V complete all as specified and directed .

S&F ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.

S&F lamp holder pvc body with back plate complete all as specified and directed.

S&F in repair LED bulb 9 watt complete all as specified and directed.

S&F in replacement of sheet metal enclosure for MCB DB VTPN double door, 4 way complete with 200 Amps rated Bus bar complete incl MCCB 4 pole 100 amp, 16 KA as incommer complete all as specified and directed .

S&F in replacement of sheet metal enclosure for MCB DB TPN double door, 4 way complete with 200 Amps rated Bus bar complete all as specified and directed.

S&F sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed .

S&F sheet metal enclosures for MCB distribution board SPN 4 way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified

S&F MCB TPN 40 to 63 Amps 415V incl all termnials, fitting etc. complete all as specified and directed .

S&F MCB SPN 32 Amps 250V incl all termnials, fitting etc. complete all as specified and directed .

S&F MCB SP 6-32 Amp ,240 Volt complete complete all as specified and directed .

M&L for replacement of call bell electric (ding dong type) , 240 Volt , single pole complete all as specified and directed .

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed .

M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed . Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run complete all as specified

S&F LED bulkhead luminaire 10W decorative type as per sample complete and including taking down existing fittings complete all as specified and directed. Make :Havells cat part No RUGBY NEO NFT 10W LED 860SSYMTOPC, Polycab Cat Part No. PLT0101316 Crompton Cat Part No. LBH-10-CDL

S&F LED mirror light with diffuser, decorative type complete and including taking down existing fittings complete all as specified and directed. Make : Havells cat part No ENDURALINE ARNEOBS 10WLED 865SPCWH , Polycab Cat Part No. LDO0103021 &Crompton Cat Part No. LCCLB-08-CDL

S & F LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete and including taking down existing fittings all as specified & directed by Engg-in-charge Make : Havells Cat part No ENDURALINE ARNEOBS20WLED 840SPCWH, Polycab Cat part No LDO0103023, & Crompton cat part No LCCLB-24-CDL

S&F in repair LED Post top 40 watt decorative type,made of cast aluminium with decoratice opal polycarbonate diffusar with IP-65 protection including fixing with suitable size GI pipe as required on the top of gate pillar including all fixing accessories with MCB DB 2 way with Suitable MCBs and control wiring from DB to fittings complete all as specified and directed. Make :-Crompton cat no. LPTO-40-CDL,Bajaj Cat ref BGCL 40W LED WH, Polycab Cat ref PCGLP 01 40 0, Havells cat ref RUBYPT35WLED757PSYMTOPC

S&F in repair recess mounting type36W, LED 2'x2' luminaire, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed. Make : BAJAJ cat part no: BZRSQL 36W GZi WH LED or equivalent Havells cat part no: VENUSNEOHE2X2PLR18-42WLLED865MOD or equivalent CG cat part no : LCTLRN-36-CDL or equivalent Polycab cat part no : PCGLLL 36 57

GEYSERS

M&L for servicing of storage type water heater (Geysers) 50/25 ltr capacity any make by disconnecting electrically and mechanically from all existing lines, opening of bottom and top for inspection complete incl base plate, heating element and copper tank , cable, PVC pipe etc, cleaning carefully and reassembling after necessary repair/replacement as specified here-in-after and replacement of old unserviceable nut/bolts and fixing in the same position complete all as specified and directed. Note :- Spare parts shall be measured and paid separately.

Supply only heating element 1500 watts push type with gasket ISI marked triangular type complete all as specified and directed.

Supply only thermostatic switch suitable for Gysers of any make/ type with temperature range adjustable type 25 to 80 degree centigrade superior quality 20 Amps 220 Volts AC Supply complete all as specified and directed.

Supply only PVC insulated and sheathed copper conductor flexible cable 2.5 Sqmm 3 core for electrical connection complete all as specified and directed.

Supply only syphon assebmly suitable for 25 Ltrs capacity Geysers of any type having 6/9 hole complete all as specified and directed.

Supply only PVC connection of 450 mm long & 15 mm dia with brass nut at both end suitable for Geysers complete all as specified and directed

S&F in repairs Bib taps suitable for bore dia of pipe in 15 mm, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed complete all as specified and directed

S&F in repairs Stop valves, 15 mm Bore dia of pipe in mm fancy type, chromium plated , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe fixed complete all as specified and directed.

S&F in replacement MCB SP 20 to 32 amps 240 V 10 KA complete all as specified and directed

Excavation in trenches in soft/loose soil n.exc 1.5 Mtr deep and n.exc 1.5 mtr wide for laying of cable and getting out including dressing/trimming of sides and leveling, grading and ramming of bottom of excavation complete all as specified and directed.

Returning, filling, including leveling , watering and well ramming excavated soil in layers n.exc 25cm thick in trenches after cable have been laid complete all as specified and directed.

Removing of excavated surplus soil obtained from excavation to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr of the starting point complete all as specified and directed .

M&L for providing cement concrete 1:3:6, type C-2, using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and directed

Taking down/out unserviceable UG cables of any cross sectional area and connections including Bricks, GI Pipes, etc of any descriptions, laid in trenches and/or fixing with walls/poles including segregating of serviceable materials viz Bricks, cables, GI Pipes etc complete all as specefied and as directed.

Supply & Fixing or Passing through pipe, XLPE insulated, Armoured, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 10 sqmm 2 core including Brass compression cable gland, terminal lug etc and testing complete all as specefied and directed.

All as per item No 43.00 above, but nominal cross sectional area 25 sqmm 4.0 Core

All as per item No 43.00 above, but nominal cross sectional area 35 sqmm 4.0 Core

All as per item No 43.00 above, but nominal cross sectional area 50 sqmm 3.5 Core

All as per item No 43.00 above, but nominal cross sectional area 95 sqmm 3.5 Core

All as per item No 43.00 above, but nominal cross sectional area 120 sqmm 3.5 Core

All as per item No 43.00 above, but nominal cross sectional area 300 sqmm 3.5 Core

M&L in repair for GI pipe light grade of size 80mm dia laying in trenches/ under floor/on walls for protection of UG cables all as specified and directed

M&L in repair for GI pipe light grade of size 50mm dia laying in trenches/ under floor/on walls for protection of UG cables all as specified and directed

M&L for duct pipe double wall , corrugated HDPE 50mm outer dia , conforming to IS:14930 (Part- II) of approved colour with fittings for cable protection complete all as specified and directed.

M&L for duct pipe double wall , corrugated HDPE 80mm outer dia , conforming to IS:14930 (Part- II) of approved colour with fittings for cable protection complete all as specified and directed.

S&F in repair MCB SPN 63 Amps 250V incl all termnials, fitting etc. complete all as specified and directed.

S&F in repair MCB TPN 63 Amps 415V incl all termnials, fitting etc. complete all as specified and directed.

S&F in repair MCCB thermal & magnetic setting 4 pole ,415 volt,100 amps, 25kA braking capacity complete all as specified and directed.

S&F in repair MCCB thermal & magnetic setting 4 pole ,415 volt,160 amps, 25kA braking capacity complete all as specified and directed.

S&F in repair MCCB thermal & magnetic setting 4 pole ,415 volt,200 amps, 36kA braking capacity complete all as specified and directed.

S&F in repair MCCB thermal & magnetic setting 4 pole ,415 volt,250 amps, 36kA braking capacity complete all as specified and directed.

S&F in repair MCCB thermal & magnetic setting 4 pole ,415 volt,400 amps, 50kA braking capacity complete all as specified and directed.

S&F in repair MCCB thermal & magnetic setting 4 pole ,415 volt,630 amps, 50kA braking capacity complete all as specified and directed.

S&F in repair energy efficeint LED Street Light Luminaries 60 watt fitting aesthetically designed for road lighting with main housing made of Pressure dia casting with uniform thickness and proper heat sink design to esure fast heat dissipation, The LEDs should be mounted on MCPCB and should be fixed to the body with proper thermal conductive paste to ensure quick transfer of heat to heat sink. The LED shall be provided with modular lens and toughened glass cover fixed with screw to the main housing ensuring required through and spread as per relevant IS Specification. Degre of protection IP 66 protection, CCT 5700K (+/- 300 K) with operating voltage range 90V to 300 V including suitable size of wire from fittings to OH line/ pole box as per site requirement complete all as specified and directed. Make :-Polycab cat part No PCGLS T1 60 N / Havells cat part No ENDURA PEARL PLUS SL60WLED 757SASY TOPC / Bajaj Cat part No BRTFG 60W LED V3 / Crompton cat part No LSTP-60-CDL

Note : (a) Make of luminaire and driver shall be same. The driver shall be potted type and phase to phase protection 400V up to 8 hours shall be provided. (b) Lumen efficiency shall be min 100 lumens / watt (c) CRI Shall be min 70 (d) Power factor of luminarie shall be min 0.95 (e) THD shall be max 10% (f) LM-79 report as per IS 16106 and LM-80 report from LED manufacturer of fitting shall be submitted before execution. (g) Inbuilt surge protection of 4 KV should be provided with external SPD should be of 10KV. (h) LED chips Make : Cree / OSRAM

S&F in repair LED Flood light 120W decorative type , IP-66 having powder coated PDC Aluminium body with toughned glass visor fitted inbuilt LED driver, 5700K, efficacy min 100 lumens/watt duly electrical connection with suitable size of wire from fittings to pole box/ Over Head line as per site requirement complete all as specifed and directed. Make:- CG Cat no- LFLN-120-CDL/60, Polycab Cat ref PCGLF T1 01 120 57, Bajaj Cat ref BJFL 120W LED I, Havells Cat ref JETAIRISFLS 120W LED 757 PSYMLTG

S&F in replacement KIOSK box weather proof made out of PVC make Sinterx cat pat no GS JB 3020 or equivalent in FINOLEX/UNIVERSAL Switch gear/ Sintex and including made out of one piece mounted SMC base and door pole mounted hinged door size 333 x 233 x 200mm out side and 300 x 200 x 105mm inside dimension comprising of aluminum bus bar 4 strips for 3 phase and neutral 63 Amp and 10 Amp MCB for controlling the street light fitting including FI clamps 30 x 4 mm with necessary MS nuts bolts and washer including embossing/painting of Danger notice of size not less than 10 cm x 7.5 cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body complete all as specified and directed. Make : Sintex / Hensal / Universal / Finolex

S & F in replacement street light bracket fabricated out of GI tubing light grade 40 mm bore bend to the shape as directed and not less then length 1.20 mtr complete with MS clamp of flat iron of suitable size 02 Nos incl nut bolts etc of complete all as specified and directed.

M&L for restringing of the HT/ LT overhead lines ACSR conductors and guard craddles using lifter and binding with insulator on HT/ LT pole using binding wire / jumper complete all as specified and as directed

M&L for trimming /cutting /chopping of tree branches all around LT/HT over conductor upto two meter and up-rooting vegetation growth around pole complete all as specified and directed.

Supplying, fabricating, installing, testing and commissioning of outdoor type LT feeder pillar box of suitable size, factory fabricated, cubical panel, floor mounted, double door, dust and vermin proof, CPRI approved, made out of 3.15 mm thick CRCA sheet, mounting on suitable foundation above 60cm from GL, 150 mm thick PCC (1:3:6) type C-2 with 100 mm offset on all sides, with front and back opening and locking arrangement, finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer incl copper bus bar of rating 400Amp for three phases and one neutral, duly covered with PVC colour coded sleeves, mounted on porcelain insulators, 4 wire, 415 Volts, 50 Hz, AC supply incl suitable size of copper cable for control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation with ventilation fan & thermostate, with and providing incl taking out old u/s panel any type with the following accessories:

MAIN INCOMMER

MCCB 4 pole, 200 Amps 36 KA Adjustable type-01 No

LED Indicating lamp on incoming

OUT GOING :-

MCCB 4 pole, 100 Amps 25 KA adjustable type -01 Nos

MCB,SPN, 63 Amps 10 KA type - 02 Nos.

MCB,TPN, 63 Amps 10 KA type - 02 Nos.

LED Indicating lamp on each out going feeder

Make of MCCB/MCB: Legrand/ SEIMENS/ Schneider/ ABB/ Havells/ Indo Asian/ C&S)

Supplying, fabricating, installing, testing and commissioning of outdoor type LT feeder pillar box of suitable size, factory fabricated, cubical panel, floor mounted, double door, dust and vermin proof, made out of 3.15 mm thick CRCA sheet, mounting angle iron frame incl suitable PCC to be fixed above 60cm from GL, 150 mm thick PCC (1:3:6) type C-2 with 100 mm offset on all sides, with front and back opening and locking arrangement, finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer incl copper bus bar of rating 400Amp for three phases and one neutral, duly covered with PVC colour coded sleeves, mounted on porcelain insulators, 4 wire, 415 Volts, 50 Hz, AC supply incl suitable size of copper cable for control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation with ventilation fan & thermostate, with and providing incl taking out old u/s panel any type with the following accessories:

MAIN INCOMMER

Onload change over switch 100A, 4 pole with handle - 01 No

MCCB 4 pole, 100 Amps 25 KA -01 No

LED Indicating lamp on incoming

OUT GOING :-

MCB,TPN, 63 Amps 10 KA type - 02 Nos.

MCB,SPN, 40 Amps 10 KA type - 03 Nos.

LED Indicating lamp on each out going feeder

Make of MCCB/MCB: Legrand/ Seimens/ Schneider/ ABB/ Havells/ Indo Asian/ C&S

Supplying, fabricating, installing, testing and commissioning of outdoor type LT feeder pillar box of suitable size, factory fabricated, cubical panel, floor mounted, double door, dust and vermin proof, made out of 3.15 mm thick CRCA sheet, mounting angle iron frame incl suitable PCC to be fixed above 60cm from GL, 150 mm thick PCC (1:3:6) type C-2 with 100 mm offset on all sides, with front and back opening and locking arrangement, finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer incl copper bus bar of rating 400Amp for three phases and one neutral, duly covered with PVC colour coded sleeves, mounted on porcelain insulators, 4 wire, 415 Volts, 50 Hz, AC supply incl suitable size of copper cable for control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation with ventilation fan & thermostate, with and providing incl taking out old u/s panel any type with the following accessories:

MAIN INCOMMER

MCCB 4 pole, 100 Amps 36 KA Adjustable type-01 No

LED Indicating lamp on incoming

OUT GOING :-

MCB,TPN, 63 Amps 10 KA type - 01 Nos.

MCB,SPN, 40 Amps 10 KA type - 03 Nos.

LED Indicating lamp on each out going feeder

Make of MCCB/MCB: Legrand/ SEIMENS/ Schneider/ ABB/ Havells/ Indo Asian/ C&S

M&L for earthing complete with galvanized steel plate earth electrode 60cmx60cmx6mm thick surrounded by char coal and salt buried directly in ground vertically in pit of depth not less then 2.25 mtr below ground level with top edge of the earth plate at depth of not less then 1.5 mtr below ground level surrounded from all sides by char coal dust and common salt in alternate layers of 15 cm depth and earth plate electrode connected to galvanised earth means of GI Strip 25X4 mm at two points by means of GI nuts bolts, check nuts and washers and connected to earthling test point drawn through GI pipe for protection of earth lead wire incl PCC earth pit (1:3:6) type C-2 with CI frame and RCC cover all as shown in electrical Plate No 3 on SSR Part-I including testing and dismantling ,taking down old unser earthing all as directed. Note: (i) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead upto 7.5 mtr, char coal dust, common salt, porcelain insulator, PCC earth Pit, CI frame ,RCC cover, funnel with wire mesh are incl in quoted rate and watering pipe, earth lead protection pipe, test poit, earth lead up to 7.5 mt .

Taking up or down steel water tubing and connections including cleaning for re-fixing of the following sizes:- Note:- Excavation and earth work shall be measured and paid for seperately.

20 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

100 mm bore

150 mm bore

M&L for GI Pipe medium grade with all necessary fittings such as bend, elbow, socket, TEE, Union, Reducer socket etc laid in trench/wall/floors including taking out unserviceable pipe and making connection to existing GI tubing complete all as specified and directed for the following sizes :-

20 mm dia

25 mm dia

40 mm dia

50 mm dia

80 mm dia

100 mm bore

150 mm bore

S&F in repairs of Gate valve (ISI Marked) cast copper alloy screwed down for pipe line with iron wheel head complete all as specified and directed for the following sizes:-

20 mm dia

25 mm dia

40 mm dia

50 mm dia

S&F in repairs Sluice valve PN-I.6 coforming to IS-14846 heavy duty with flanged end and brass spindle, sheet gasket 3 mm thick, MS nut bolts and washer including cutting of existing GI water pipe line to fix the sluice valve at the location and jointing with existing water mains complete all as specified and directed for the following sizes:-

80 mm bore

100 mm bore

150 mm bore

S&F in repair Non- return valves both end flanged conforming to IS:5312:1984 Part-1, Swing Type with Natural Rubber Flap,Flanges Drilled to IS:1538 PN 1.6, 100mm dia ISI mark including provision of jointing material such as insertion rubber gasket sheet 3mm thick, nut & bolts with washer all as required of following size, complete all as specified and directed.

S&F in repair Non- return valves both end flanged conforming to IS:5312:1984 Part-1, Swing Type with Natural Rubber Flap,Flanges Drilled to IS:1538 PN-1.0, 250mm dia ISI mark including provision of jointing material such as insertion rubber gasket sheet 3mm thick, nut & bolts with washer all as required of following size, complete all as specified and directed.

S&F in repair sluice valves heavy duty cast carbon /stainless steel of 150mm nominal size confirming to BS-1873, BS-1868 including ammendments API-600 ASME class 600 suitable to test pressure 93 Kg/ sq cm, both end flanged total weight not less than 252 kg both end flanged with spindle and check nut , including taking out old unserviceable sluice valve at any location, complete all as specified and directed.

S&F in repair 250 mm bore non return valve heavy duty cast iron /stainless steel confirming to BS-1873, BS-1868 including ammendments API-600 ASME class 600 suitable to test pressure 93 Kg/ sq cm, both end flanged total weight not less than 204 kg both end flanged with spindle and check nut conforming to , complete all as specified and directed.

M & L for arresting of water from existing pipe line in position from CI/GI pipe of size 80 mm to 150 mm bore with and including excavation, cutting ,welding as per site requirement, jointing material such as flange joint/Gasket joint/CI or GI fitting ,nut& bolts ,washers and refilling etc complete all as specified and directed.

M & L for arresting of water from existing pipe line in position from CI/GI pipe of size 15 mm to 50 mm bore with and including excavation ,cutting, welding as per site requirement, jointing material such as flange joint/Gasket joint/CI or GI fitting ,nut& bolts ,washers and refilling etc complete all as specified and directed.

M&L for MS Sheet cover of valve pit chamber of the internal including cleaning of pit cover and minor repair work required as per site condition like brick work , rendering plaster 1:4 inner/out side of the pit with 4mm thick mild steel sheet cover with MS angle iron frame with locking arrangement and handle for opening and painting both side for pit cover complete incl taking out of U/S items all as specified:-

1200mm X 1200mm X 1200 mm

900mm X 900mm X 900 mm

600mm X 600mm X 600 mm

S/F in replacement of Electronic water level indicator electric operated with indications of level of water in existing UG Sumps comprising of one number each Automatic multi water level indicator of 10 level indication heavy duty board on principle of conductivity including making connections of new sensor suitable for indicator and Electronic water level indicator installed at pump house bldg appx distance upto 180 Mtr for cable for smooth functioning complete all as specified and directed. Make: ACTIVE CONTROL/BENZER/AQUALIFT/ Unisons or equivalent as approved by E-in-C or WC. Note- All connected items required for smooth functioning of water level indicator deemed be included in quoted rates i.e wire/ sensor/ control panel etc

M&L for GI Pipe light grade of 20 mm bore with all necessary fittings such as bend, elbow, socket, tee, union, reducer socket etc laid in trenches or fixed to RCC column/ laid under floor/path/ hard standing for protection of Water level indicator cable including taking out unserviceable pipe complete and making good the disturbed suface complete all as specified and directed.

M&L for 12.5HP servicing of pump set including cleaning, greasing, paintaing of motor/pump complete incl disconnecting of items, nut bolts washer etc as per site condition complete all as specified and directed. Note : Following spare parts shall be included in the quoated rate.

Bearing set as per sample -01 No

Gland packing-as per site

Star coupling as per sample -01 No

MS coupling Cover- 01 No

M&L for 15HP servicing of pump set including cleaning, greasing, paintaing of motor/pump complete incl disconnecting of items, nut bolts washer etc as per site condition complete all as specified and directed. Note : following spare parts shall be included in the quoated rate.

Ball bearing as per sample.

Gland packing-as per site

Star coupling as per sample -01 No

MS coupling Cover- 01 No

GM Bush as per site

S & F in replacement following spare parts suitable for 120HP Pump set :-

Coupling as per sample

Ball bearing as per sample

M&L for Glow Sign Board made out of laminated sheet of size 150 cm x 90 cm x 2.5 mm thick, computerized cut letter of 15 CM long covered with GI sheet of 28 SWG , size 150 cm x 90 cm x 15 cm depth including consisting of lighting arrangement with two No of LED fittings 20 W each, 240 V complete with necessary accessories copper cable 1.5 Sqmm three core for connection from existing eletrical point and mounting on wall with fixing arrangement such as nut, bolts, washers, clamp etc all as directed. The following Letters to be cut and place on the Board :-

MILITARY ENGINEER SERVICES, PUMP HOUSE, MEHTAB MAJRA UNDER GE JUTOGH

Collect Sample of water from bore well for testing of " Chemical & Bacteriological tests " from approved laboratory and report submitting to Engr- in -Charge complete as specified and directed.

S & F in replacement of Altoch-Dosing system(Model ADS-1)Non-Metalic solution tank of 100 ltr capacity with motor driven, Agitator to maintain uniform through out the tank with all connected accessories like cable etc necessary valves including making the new connection of the dosing system to the existing water pipe line all as specified and directed by engineer-in-charge. Note: 100 Ltr Solution Tank, Motor, agitator, connection cable, starter, valves all other connected accessories as per site condition deemed to be included in the quoated rate for complete functional requirement complete all as specified and directed. MAKE- DECLIBAC TECHNOLOGIES, POTTER & WATTS, BRIO ZING or any approved by GE.

Supply only Alum ferric of super quality complete all as speifed and directed.

Supply only Bleaching powder of super quality. Make SRIRAM (ISI marked), Alotoch or any other approved make complete all as specified and directed.

Supply only Calcium Hypo Chlorite (CHLORINE 65% to 70%) calcium based granular disifectant for water treatment complete all as specified and directed. Make:- AQUAFIT, Altoch or any other approved make by E-in-C's.

M&L for taking out the sedimental materials from UG Sump of capacity 1,25,000 gallons, silt, other foreign material from sump and deposting where directed at a distance not exc. 50m, cleaning all the surface internally and externally with iron brushes with bleaching and including white washing with two coats of lime wash mixed with 0.50% copper sulphate etc complete only externally painting of UG sump and painting the steel surfaces of sump with two coats of synthetic enamel paint after preparation of surface complete all as specified and directed.

All as per Srl item No. 94.00 above but UG sump of capacity 75,000 gallons located at Mehtab Mazra complete all as specified and directed.

M&L for taking out the sedimental materials from Over Head Tank of capacity 45,000 gallons, silt, other foreign material from Tank and deposting where directed at a distance not exc. 50m, cleaning all the internal surface with iron brush with bleaching etc complete all as specified and directed.

M&L for taking out the water from shallow well located at Parmanoo by using sewage pump of suitable capacity and PVC hose pipe to the adjascent Nallah and taking out of mud/silt/foreign material laying inside the well by using conventional engineering method, removing to and depositing in adjascent nallah complete, cleaning all the surface internally with iron brushes, bleaching powder and white washing the external surfaces complete and internal surface above the water level with two coats of lime wash mixed with 0.50% copper sulphate etc complete and painting the steel surfaces of tank with two coats of synthetic enamel paint after preparation of surfaceall complete all as specified and directed.

Babu Ram Sud and Sons

KATWAL TECHNOCRATS

M/S Sonu Traders

M/S JAI MAA JAGDHAMBA CONSTRUCTION