Madurai District Renovation of Community Hall at Alligundam Village in Alligundam Panchayat Usilampatti Block

Amount

Madurai District Renovation of Community Hall at Alligundam Village in Alligundam Panchayat Usilampatti Block

Plastering with cement mortar 1:3 mix to 10 mm thick for ceiling works inckuding cost conveyance and all labour charges etc complete.

Plastering with cement mortar 1:5 mix to 12 mm thick including cost conveyance and all labour charges etc complete.

Granolthick flooring including finishing the joint and pointing flush with tile surface etc complete.

Weathering course with broken brick jeely for 20 mm size mixed with pure slacked lime (no sand to be used) in proposation of 32:12.5 cft to proper gradient,well beation with wooden beaters etc

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Distempering the old walls and ceiling Two coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer

Plastic Emulsion Paint two coatsincluding cost conveyance of all materials to site and all labour charges etc complete.

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Electrification Light Point (SD 17)

Fan Point (SD 17)

Plug Point (SD 36)

Tube Light ( SD 89)

Fan ( SD 106 )

Service Wire (SD 66)

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

THANIKODI P