ARM Electrical Works to ESIC Regional Office, staff quarters Nungambakkam, ESIC and ESIS Campuses, Branch office, Dispensary, Staff Quarters at Chetpet, Triplicane and Kilpauk, Chennai for a period of 1 Year

Engaging of 1 No 'C' Licence Holder (Supervisor) of day to day maintenance of Electrical maintenance works and to monitor these works are properly attended and to take care of complaints arised related to repairs / replacement of damaged fittings / fixtures in the campus such as switches, sockets, switch boards, HT/LT Panels , MCBs, MCB DBs, MCCBs, SFUs, FSUs etc., and all types of fans / light fittings, UG cables etc., complete all as directed by the Engineer-in-charge. ( 01 No.) (Qualification: Diploma in Electrical Engineering with 10 years related experience/ITI with 12 years or experience (supervisory) in maintenance job) Note:- 1.He is the responsible for maintain the day to day complaint Register, Preperation of Duty Roster, Material Consumption Register, Log Book/Log sheets and to up keep the neat & Tidy of installations with installed plants & machinaries as per the direction of Engineer-in-Charge 2. He is the responsible for HT Metering cubicle to monitor & maintain all parameter readings. 3. He is the responsible for timely calibration of HT VCB's, LT ACB's/MCCBs and Earth Fault Relays and Over Current Relays. 4. He is the responsible for HT Panels, Transformers, ACBs, MCCBs, APFC Panels with connected Capacitor Banks, Power Contactors & Relays, Up Keep & maintain records for earth results in the HT & LT installations as per the direction of Engr-in-Charge. 5. During Main EB supply failure to monitor the running of stand by DG Sets and maintain the Plant Running Record Book with all parameters. 6. To maintain the EB Shutdown Register & obtain the necessary signature from EB authorities . (It should be talley with Stand By DG Set PRRB)

Engaging an Electrician Cum DG Operator cum Panel opearatorion for day to day operation of Substation, DG sets, LT Panels , MCBs, MCB DBs, MCCBs, SFUs FSUs etc and day to day maintenance of Electrical works like repairs to internal and external electric supply by replacing the worne out fittings/fixtures , reparing the unserviceable fittings/ fixtures such as switches, sockets, switch boards, LT Panels , MCBs, MCB DBs, MCCBs, SFUs FSUs etc and all types of fans/ light fittings, UG cables, DG Set etc complete all as directed by the Engineer-in-charge.; and also Preventive maintenance of above mentioned equipment as per standerd check list and maintain logbooks along with shift register to be updated daily etc to be maintained as directed by engineer-incharge.. Skilled (ITI Certificate with 3 Years Experience)- 4 Nos

Electrician Cum DG Operator-1 (as detailed above)

Electrician Cum DG Operator-2 (as detailed above)

Electrician Cum DG Operator-3 (as detailed above)

Electrician Cum DG Operator-4 (as detailed above)

Engaging a Fire Fighting Technician for day to day maintenance and operation of Fire pump house by operating of Diesel Engine,Jockey pump,Booster pump, presurization pump, terrace pump, diesel pumpmaintenance of fire panels and other equipments pertains to fire fighting system etc to maintain required water pressure at all times in External and internal fire hydrants, Hose reels etc complete all as directed by Engineer in charge. ( 1 No - Fire fighting technician- skilled) (ITI Certificate with 3 Years Experience in Fire Safety).

Engaging an Electrician for day to day maintenance of Electrical works like repairs to internal and external electric supply by replacing the worne out fittings/fixtures , reparing the unserviceable fittings/ fixtures such as switches, sockets, switch boards, LT Panels , MCBs, MCB DBs, MCCBs, SFUs FSUs etc and all types of fans/ light fittings, UG cables, DG Set etc complete all as directed by the Engineer-in-charge. (1 nos Electrician- Skilled) (ITI Certificate with 3 Years Experience).

Helper to Electrician for day to day maintenance of Electrical works like repairs to internal and external electric supply by replacing the worne out fittings/fixtures , reparing the unserviceable fittings/ fixtures such as switches, sockets, switch boards, LT Panels , MCBs, MCB DBs, MCCBs, SFUs FSUs etc and all types of fans/ light fittings, OH lines, UG cables etc ... complete all as directed by the Engineer-in-charge. ( 2 nos Un Skilled)

Helper-1

Helper-2

Engaging a Helper to assist technical staff such as HT/LT Panel Operators, Fire Pump Technicians etc...in routine operations and preventive/corrective maintenance activities like Assisting in electrical fault isolation and repair, Supporting maintenance of LT/HT panels, control wiring, MCCs, etc.Handling tools, material shifting, and cleaning of electrical panels and Coordinating during shutdowns, emergency operations, and safety drills complete all as directed by the Engineer-in-charge. ( 1 nos Un Skilled)

Supply of 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 4.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 25 mm iron staples/ saddles/ screws

Supply of 25 mm dia. ISI marked, PVC conduit

Supply of 25 mm PVC bends

Supply of 25 mm PVC couplers

Supply of Modular GI box for 4module

Supply of Modular GI box for 6 module

Supply of Modular GI box for 8 module

Supply of Modular GI box for 12 module

Supply of S.P. 5/6 amps, one way modular switch, ISI marked

Supply of S.P. 15/16 amps, one way modular switch, ISI marked

Supply of 3 pin 5/6 amps modular socket outlet, ISI marked

6 pin 15/16 amps modular socket outlet, ISI marked

Supply of Stepped type Modular Fan regulator (2-module)

Supply of Modular blanking plate

Supply of Modular base & cover plate for 3 module

Supply of Modular base & cover plate for 6module

Supply of Modular base & cover plate for 8module

Supply of SP 5/6A one-way piano switch, ISI marked

Supply of SP 15/16A one-way piano switch, ISI marked

Supply of 3 pin 5/6A piano socket outlet, ISI marked

Supply of 6 pin 15/16A & 5/6A piano socket outlet

Supply of Bell push, piano type

Supply of Call bell/buzzer, single phase

Supply of PVC Batten/Angle Holder

Supply of 6 amps. to 32 amps. ratings , SP MCB, "C" curve, 10 KA breaking capacity

Supply of 6 amps. to 32 amps. ratings , SP MCB, "C" curve, 10 KA breaking capacity

Supply of Single pole, Blanking plate

Supply of 63 amps., 4 pole isolator

Supply of 63 A, rating, 2 pole RCCB, 30mA

Supply of 63 amps. rating, 4 pole RCCB, 30mA

Supply of 20 amps. SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure

Supply of Aluminium lugs for up to 50 sq. mm cable

Supply of Aluminium lugs for 70 sq.mm to120 sq. mm cable

Supply of Aluminium lugs for 150 Sq.mm 240 sq. mm cable

Supply of Aluminium lugs for 300 sq. mm cable

Supply of GI saddles 19mm x 0.55mm for conduit

Supply of 250 mm X 200 mm H.T. danger notice plate

Supply of 200 mm X 150 mm M.V. danger notice plate

Supply of Coke

Supply of Salt

Supply of 5 Watt/7Watt LED Down lighter (SMD Type/Recessed) (System lumen efficacy ≥ 105 < 120 lm/Watt ) of Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector

Supply of 36 watt LED Panel light 2x2 ft. (System lumen efficacy ≥105 1.20 mm) Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Supplying of 18 Watt LED Recessed/surface Down lighter (Round / square/ Rectangular)LED Down lighter (COB Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) of following body materials. Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector

Supplying of 18- 22 watt LED surface mounted Batten light (System lumen efficacy ≥105 <120 lm/Watt) of following body materials. Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) Make:Havells/Philips/Crompton/Wipro

Supply of 7W / 9W LED Bulb Make:Havells/Philips /Crompton /Wipro

Supply of 15W LED Bulb Make:Havells/Philips/Crompton/Wipro

Supply of ceiling fan with Brush Less Direct Current (BLDC) Motor 1200mm, BEE 5 star rating, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)

Supply of AC Exhaust Fan 300mm (12”) Sweep (Light Duty)

Supply of 300mm Sweep WALL MOUNTING FAN

SupplySurface Box [SupplySURFACE MOUNTING BOXES (PLASTIC) - HIGHER END] - 3 Module

SupplySurface Box [SupplySURFACE MOUNTING BOXES (PLASTIC) - HIGHER END] - 6 Module

Supply 25A Modular PVC Box type Wall Socket with C-20A/C-25A Single Pole MCB protected AC socket with Plug Top Make : Havells/orbit/anchor/MK/Legrand

Supply of PVC /cotton tape Role (10 Mtrs)

Supply of Empire tape Role (10 Mtrs)

Supply of 4 Pin LED PL-L-4P Round/squared 18W LED bulb/light suitable for existing panel lights Make: Havells/Philips/Wipro/Crompton

Supply of Base socket for 4 Pin LED PL-L-4P Round/squared 18W LED bulb/light suitable for existing panel lights Make: Havells/Philips/Wipro/Crompton

Supply of 3 Core 2.5 Sqmm with ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990.Makes:Finolex/RRKabel/Polycab/Havells/KEI/ Gloster/ Goldmedal / GM/ Finecab/ Million/ APAR(Anushakthi)

Supply of 155 X 210 X 92 Sizes thermo-plastic cable junction boxes with IP66/67 weatherproof, for outdoor installation with knockouts for cable entry including terminals etc., complete (sizes in mm). Make : Hensel/Sadhrish

Supply of 6A, flush type Neon Indicator

Supply of Running capacitor 2.5/3.15/4.0/6.0 μF

Supply of 63A, 415V Porcelain Rewireable Fuse Unit Makes: C&S/Standard/HPL/ Sputnik / Million / Gold Medal / GM/Benlo/Anchor

Supply of 100A, 415V Porcelain Rewireable Fuse Unit Makes: C&S/Standard/HPL/ Sputnik / Million / Gold Medal / GM/Benlo/Anchor

Supply of 200A, 415V PorcelainFuse Unit with Extension with extension strip Makes: C&S/Standard/HPL/ Sputnik / Million / Gold Medal / GM/Benlo/Anchor

Supply of 300A, 415V PorcelainFuse Unit with Extension with extension strip Makes: C&S/Standard/HPL/ Sputnik / Million / Gold Medal / GM/Benlo/Anchor

Supply of 6 SWG Copper Earth Wire (0.16 kg/m)

Supply of 8 SWG Copper Earth Wire (0.1155 kg/m)

Supply of 10 SWG Copper Earth Wire (0.075 kg/m)

Supply of 6-way neutral link, complete with insulated base, suitable for mounting in distribution boards, made of electrolytic grade brass with adequate current-carrying capacity, including all necessary accessories as required.

Supply of 12-way neutral link, complete with insulated base, suitable for mounting in distribution boards, made of electrolytic grade brass with adequate current-carrying capacity, including all necessary accessories as required.

Supply of 5 Amps 3 Pin Top

Supply of 15 Amps 3 Pin Top

Supply of HRC Fuse Link 6A to 35A

Supply of HRC Fuse Link 45A to 63A

Supply and fixing of LED Post top lantrne/ Gate light fitting of 25 Watts, with 4000K colour temperature, IP 65 with LED Lamp all as directed by the Engineer-in-Charge. Make-Havells Mini Ruby Post Top LED Lamp or equivallent make of Philips.

LED Street light fixture 36 watt, Supplying, installation, Testing & Commissioning of 50 watt Street light LED fixture with powder coated pressure die cast aluminum body (System lumen efficacy >135 lm/Watt)

LED Street light fixture 50 watt, Supplying, installation, Testing & Commissioning of 50 watt Street light LED fixture with powder coated pressure die cast aluminum body (System lumen efficacy >135 lm/Watt)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering with suitable HDPE Pipe for UG cable laying and refilling the trench etc as required upto 35 Sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering with suitable HDPE Pipe for UG cable laying and refilling the trench etc as required. above 35 sq.mm and upto 95 sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Supply and transportation of 16 Sq mm X 4 core coreXLPE insulated, 1100V gradearmoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I U.G.

Supply and transportation of 25 Sq mm X 4 core XLPE insulated, 1100V gradearmoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I U.G. CABLES

Supply and transportation of 35 Sq mm X 4 core XLPE insulated, 1100V gradearmoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I U.G. CABLES

Supply and transportation of 50 Sq mm X 4 core XLPE insulated, 1100V gradearmoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I U.G. CABLES

Supply and transportation of 70 Sq mm X 4 core XLPE insulated, 1100V gradearmoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I U.G. CABLES

Supply and transportation of 95 Sq mm X 4 core XLPE insulated, 1100V gradearmoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I U.G. CABLES

Supply and transportation of 120 Sq mm X 4 core XLPE insulated, 1100V gradearmoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I U.G. CABLES

Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz..enclosed with no volt coil and overload protection with necessary materials, etc., complete suitable for 5 to 7.5 HP

Supply and fixing of 4.0 KVA 1-phase, automatic Electronic Voltage Stabilizer.Makes: V-Guard / Real Guard / Uni Stab / ITL

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A,30KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.250 A,36KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board includingdrilling holes in cubicle panel, making connections, etc. as required. 400 A, 50KA, FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 630 A, 50KA, FPMCCB

Supply and fixing of 230V/ 275V, 50Hz rating of 20-60 micro farad.Starting capacitor

Supply and fixing of 230V/ 275V, 50Hz rating of 15-36 micro farad.Running capacitor

Supply and fixing Supply and filling of R-22 Refrigerant Gas

Supply and fixing of CT operated direct reading type Ammeter /Volmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Below 500 A /Above 500A

Supply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp with integral circuit, terminal block, including connection etc. as required : Red/yellow/Green colour

Supply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp with integral circuit, terminal block, including connection etc. as required :Blue colour

Supply and fixing of push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as required. Make:Seimens/ ABB/ Schneider/L&T/C&S/HPL : Non-luminous type

Routine maintenance of 630 KVA transformer, including testing of insulation resistance, oil breakdown strength. Reconditioning / replacement of silica zel,cleaning of transformer and topping upto oil level if required (extra cost will be paid for oil).

Testing of Transformer oil for dielectric breakdown strength.

Supply of new and tested transformer oil as per IS-335 - 1972 (per Ltr)

Filtration of transformer oil as per ISS specifications filters to dielectric strength above 40KV …….at site. (Per Ltr)

Painting to 630 KVA transformer with 2 coats Zinc chromate red oxide duly scraping existing paint followed by 2 coats of hammer ton grey paint etc., complete.

Supply and fixing of 24V 32 AH SMF battery with 2 years warranty genuine lead-acid genset starter battery suitable to 500 KVA DGSET Cummins Pulse 24V 32Ah or HBL DG2XL-500 (24V, 32Ah)., including wire leads, connections etc complete and it is including Buy-back basis of old battery

Supply and fixing of 12V 180 AH SMF battery with 2 years warranty, including wire leads, connections etc complete. Makes: Quanta / Racket / Exide.

Supply and fixing of 12V 18 AH SMF battery with 2 years warranty, including wire leads, connections etc complete. Makes: Quanta / Racket / Exide.

Supply and fixing of 12V of Rating upto 9 AH SMF battery with 2 years warranty, including wire leads, connections etc complete. Makes: Quanta / Racket / Exide.

Supply and Transportation of 5 HP,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi.

Supply Installation Testing and commissioning of self-healing MPP/MP type shunt capacitor Heavy duty Three phase 440 V, 50 Hz capacitor (Bank) conforming to IS:13340-41 / IEC :831-1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.5 Watt per KVAR. including making connections with suitable capacity conductors/cables testing as required.

Supply and fixing of 440 Volt 3 pole capacitor (AC 6 B) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current, conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type including making connections, testing etc. as required. suitable for 21 to 25 KVAR capacity capacitor bank.

General servicing & preventive maintenance of 60 HP electric pump motor including IR test, terminal check, lubrication, alignment verification, cleaning, and test run by authorized technician etc.. In the presence engineer in -charge

General servicing & preventive maintenance of 12.5 HP electric pump motor including IR test, terminal check, lubrication, alignment verification, cleaning, and test run. In the presence engineer in -charge

General servicing & preventive maintenance of 20 HP electric pump motor including IR test, terminal check, lubrication, alignment verification, cleaning, and test run. In the presence engineer in -charge

General servicing & preventive maintenance of 44 KVA diesel engine-driven fire pump (DG set type), including inspection and servicing of the fuel system (tank, lines, sedimenter), battery terminals & charger, cleaning of air/oil/fuel filters, lubrication check, radiator cleaning, and full test run of pump to be done by OEM authorized agency or experienced diesel mechanic . Excludes cost of consumables like filters, oil, and spares. In the presence engineer in -charge

General servicing & preventive maintenance of 800A, 11 kV VCB, including internal cleaning, lubrication, inspection of vacuum interrupters, tightening of terminations, interlock & mechanism check, insulation resistance test, manual/electrical operation testing of Relay,CT, PT,Breaker Electrical Testing and submission of report. Work to be carried out with approved tools and as per IS/CEA safety norms.

Servicing and cleaning of existing Smoke detector and fire alarm system to made fully functional the visual indication, monitoring system including connections, interconnections and made functional for the locking arrangements with key including proper checking for loop connections and fixing new batteries as required at site etc all as directed by the Engr-in-Charge. Note:- Batteries will be measured and paid under separate items.

Painting of 6.0 m street light pole (MS tubular/swaged type) including thorough surface cleaning with wire brush/emery paper to remove rust, dust & loose paint, application of one coat approved anticorrosive metal primer and two coats of approved synthetic enamel paint of specified shade, including thinning, provision of brushes/consumables, and all lead, scaffolding/ladder work, complete as directed by Engineer-in-Charge.

Carrying out minor welding works on existing street light poles/pipes /structure including surface preparation by cutting/grinding, welding with suitable electrodes (E6013 or equivalent) using portable welding set, rectification of cracks, base plate, brackets/fittings as required, finishing the welded portion with grinding, application of primer, and one coat of synthetic enamel paint of approved shade, complete as directed by the Engineer-in-Charge.

Testing of earth pit including measurement of earth resistance using digital 3/4-wire earth resistance tester (fall-of-potential method or clamp/three-wire as applicable), providing site test certificate, signed by authorized technician, and submission of soft/hard copy report, complete as directed by Engineer-in-Charge.

Comprehensive servicing and testing of 1000A LT Air Circuit Breaker (ACB), including dismantling of arc chutes, thorough cleaning of fixed and moving contacts with approved solution, lubrication of mechanical moving parts, checking and adjustment of interlocks and auxiliary circuits, servicing of spring charging motor and ON/OFF mechanism, calibration and relay setting (LSIG / microprocessor-based), insulation and continuity testing, and restoration of the ACB to full serviceable condition with test operation, through manufacturer’s authorized service agency, all as per OEM standards and as directed by the Engineer-in-Charge.

Supply and placing of Rubber Mat 2m x 1m suitable for 11 KV installation confirming to IS

Supply and fixing of First Aid Box complete with all First Aid Medicines

Supply and fixing of Shock Treatment Chart fixed in glass frame

Supply and fixing of 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle

Supply and fixing of Metallic Danger Board as required by the Electrical Authorities

Refilling of 4.5 kg CO₂ type Fire Extinguisher, including evacuation of existing gas, cleaning and inspection of cylinder, refilling with CO₂ gas confirming to IS 15683, pressure testing, fixing of discharge hose and horn, re-sealing, labeling, and affixing inspection tag complete as directed by Engineer-in-Charge.

Refilling of 6 kg ABC (Dry Chemical Powder) type Fire Extinguisher, including emptying of old powder, internal cleaning, refilling with ABC powder confirming to IS 14609, re-pressurizing with nitrogen, checking of pressure gauge, sealing, and affixing of refill/service tag complete as directed by Engineer-in-Charge.

Refilling of 2 kg ABC (Dry Chemical Powder) type Fire Extinguisher, including emptying of old powder, internal cleaning, refilling with ABC powder confirming to IS 14609, re-pressurizing with nitrogen, checking of pressure gauge, sealing, and affixing of refill/service tag complete as directed by Engineer-in-Charge.

Numbering of ceiling fan/ exhaust fan/ LED fittings/streetlights, Panels/DBs/Pumps etc...as required. ( paint and labour charges included)

Supply & fixing of Wire mesh 20 gauge

Supply and fixing of Weld mesh for existing Lovers

Supply & Making heat shrinkable outdoor straight through joint for 3.5core x 25/35/50 Sq.mm size of PVC/ XLPE insulated aluminum conductor cable of 1.1 KV grade including cost of ferrules compound, sleeves and other jointing materials etc. as required.

Supply & Making heat shrinkable outdoor straight through joint for 3.5 core × 70/95/120 Sq.mm sizeof PVC/ XLPE insulated aluminum conductor cable of 1.1 KV grade including cost of ferrules compound, sleeves and other jointing materials etc. as required.

Supply & Making heat shrinkable outdoor straight through joint for 3.5 core × 150/185/240 Sq.mm size of PVC/ XLPE insulated aluminum conductor cable of 1.1 KV grade including cost of ferrules compound, sleeves and other jointing materials etc. as required.

Supply & Making heat shrinkable outdoor straight through joint for 3.5 core × 300/400 Sq.mm size of PVC/ XLPE insulated aluminum conductor cable of 1.1 KV grade including cost of ferrules compound, sleeves and other jointing materials etc. as required.

Supply & Making heat shrinkable outdoor straight through joint for 4 core × 6/10/16 Sq.mm size of PVC/ XLPE insulated aluminum conductor cable of 1.1 KV grade including cost of ferrules compound, sleeves and other jointing materials etc. as required.

Rewinding of 900/1200 mm sweep ceiling fan motor (starting and running winding) including allnecessary material. The motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enameledwire with 'E' class insulation material and making connections etc. as required. (New model ceiling fan)

Providing and Replacement of ball bearing of ceiling/exhaust fan as required. (NBC/ SKF)

Providing and Replacement of Gun metal bush of ceiling/ exhaust/cooler fan/ as required

Spray painting of ceiling fan of size 900/1200/ 1400 mm with two coats of white/ brown enameled paint after cleaning with sandpaper. Filling etc. as required.

Rewinding of three phase 5.0 H.P motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enameled wire 'E' class insulation material and testing etc. as required make it in perfect working condition.

Rewinding of three phase 7.5 H.P motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enameled wire 'E' class insulation material and testing etc. as required make it in perfect working condition.

Rewinding of three phase 10 H.P motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enameled wire 'E' class insulation material and testing etc. as required make it in perfect working condition.

Rewinding of three phase 15 H.P motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enameled wire 'E' class insulation material and testing etc. as required make it in perfect working condition.

Supply and charging of fresh refrigerant and testing of performance of air conditioner 1.5 TR Window/ Split A.C

Installation of Split Air Conditioners

Removing existing Split AC /Casette Type AC without damaging copper pipe

Repairs and Installation of existing PCB in 1.0 / 1.5 / 2.0 Ton Split A.C. Unit

Overhauling and servicing the Split type 1.5/2.0 Ton A.C. Machine by Cleaning the condenser cooling Coil etc., by blower and oiling the Fan Motor and Cleaning all parts and putting the machine in working condition.

Fabrication, Transportation, Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting on street light pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required POLE BRACKETS

Fabrication, Transportation and supply and Fixing of 1.5 Mtr length Double Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe with flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required POLE BRACKETS

Supply and Fixing of 240/220 V, Red/yellow/Green colour LED (22.5 mm dia) Pilot lamp with integral circuit, terminal block, including connection etc. as required.

Supply and Fixing of 240/220 V,Blue colour LED (22.5 mm dia) Pilot lamp with integral circuit, terminal block, including connection etc. as required.

Supply and fixing of push button actuators and integral contact block ofdia. 22.5 mm Luminous type including making connection etc. as required. Make:Seimens/ ABB/ Schneider/L&T/C&S/HPL

Supply and Fixing of Din Rail Terminal Blocks, Copper for UG cables upto 50 sqmm for LT Panels

Supply and Fixing of Phase Changeover in SS Enclosure ( 3 phase indicators & 40A Cam operated Rotary swiches

Supply and Fixing of Phase Changeover in SS Enclosure ( including 3 phase indicators & 63 A Cam operated Rotary swiches for 3 phases)

Supply and fixing/laying of 63 mm dia HDPE pipe for UG XLPE Cabling etc.. As required

Supply and fixing/laying of 38mm/50mm mm dia HDPE pipe for UG XLPE Cabling etc.. As required

Providing of (M&L) Earthing with GI Earth pipe 4.5 mtr long, 40 mm dia including acessories and providing masonary enclosure with cover plate and locking arrangements and water pipe of 2.7 metre long etc, with earth electrode, charcoal and salt all as specified and as directed by the Engr-in- Charge.

Providing and laying earth connection from earth electrode with 4 mm dia copper wire in 15 mm dia GI pipe from earth electrode including crimpting with copper thimble excavation and refilling as required at site on surface or in recess all as specified and as directed by the Engr-in- Charge.

Painting to Electrical LT Panels:The work includes complete surface preparation of LT panels by removing rust, dust, grease and loose paint; application of one coat of approved red-oxide primer and two coats of synthetic enamel paint of approved make/shade; repainting of feeder names, danger sign, phase marking; masking/protection of live components; and handing over with a uniform smooth finish. All labour, tools, scaffolding, consumables, and safety precautions included.(Asian/Berger/Nerolac or equivalent)

Painting of existing fire-fighting MS pipe lines (all diameters)/ Fire Pumps including thorough surface preparation by removing rust, dust, loose paint and foreign deposits with emery paper/wire brush; cleaning with thinner; applying one coat of red-oxide primer and two coats of synthetic enamel paint of approved make/shade (Fire Red/Signal Red); repainting of flow direction arrows, pipe identification labels, and hazard markings; protection of valves, gauges, sprinklers, joints and adjacent surfaces during painting; and handing over with a smooth and uniform finish. All labour, materials, consumables, ladders/scaffolding, PPE and safety precautions are included.(Asian/Berger/Nerolac or equivalent)

Servicing, overhauling and repair of existing 5 HP / 7.5 HP starter panel including complete cleaning, tightening of terminals, megger testing, replacement of defective items such as thermal overload relay (TOR) or single-phase preventor (SPP) or control relays; re-fixing, wiring, termination, testing & commissioning; including all labour, consumables, tools & safety items etc. complete.

Servicing and repair of 5 HP /7.5 HP submersible pump including dismantling, cleaning, lubrication, supply and replacement of mechanical seals, impellers or diffusers as required, major overhauling with shaft alignment and balancing, reassembly, testing for flow/pressure and commissioning at site, including labour, hoisting/lowering, transport and handling charges complete as directed.

Providing / conducting complete fire audit Including submission of fire audit report for the whole premises by Certified fire safety auditors / NABH-approved auditors / State Fire Dept (NOC) / Third-party expert agencies.

Providing, laying, testing and commissioning of ‘C’ class heavy-duty MS pipe 150 mm size conforming to IS 1239 (Class-II) / IS 3589, including welding, fittings (elbows, tees, flanges, tapers), nuts & bolts, gaskets, etc., and fixing the pipe on wall/ceiling with suitable clamps/supporting frame, and applying two or more coats of synthetic enamel paint of required shade — complete as required.

Dismantling and removing existing 80mm/ 150 mm NB pipe by cutting, including labour, gas cutting consumables, T&P, stacking/remova etc.. Complete as directed by Engineer In-Charge.

Providing, laying, testing and commissioning of ‘C’ class heavy-duty MS pipe 80 mm size conforming to IS 1239 (Class-II) / IS 3589, including welding, fittings (elbows, tees, flanges, tapers), nuts & bolts, gaskets, etc., and fixing the pipe on wall/ceiling with suitable clamps/supporting frame, and applying two or more coats of synthetic enamel paint of required shade — complete as required.

Supplying and fixing single headed Stainless Steel hydrant valvewith instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel, ISI marked and conforming to IS 5290 (Type-A), with Stainless Steel cap and chain — complete as required.

Supplying, fixing, testing and commissioning of 150 mm dia butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

Providing, installation, testing and commissioning of 150 mm dia non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304)

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Stainless Steel (Grade 304)

Supplying and fixing of 4 way fire brigade connection for 150 mm dia M.S. Pipe of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required:

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Providing and fixing in position industrial type pressure gauges with gun metal / brass valves complete etc. as required.

Pressure testing of entire fire-hydrant network using existing installed hydrant pumps (fire pump room/house), including connecting test lines, gauges, temporary blanks, labour, holding for test duration, recording and handing over test report.

Supply and fixing of escape signage boards made of rigid photoluminescent (glow-in-the-dark) sheet, with high-intensity luminous properties, including all accessories, fixing materials, supports, and as per approved sample and site requirement.

Supplying and fixing of “FIRE ASSEMBLY POINT” signage board of size 400×300 mm made of 3 mm rigid PVC/FRP with reflective/photoluminescent printing, including GI pipe/wall mounting, screws, clamps, foundation (if required), labour, tools and transportation, complete as per direction of Engineer-in-Charge.

Providing and fixing 315 A TP&N disconnector fuse switch unit inside existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making necessary connections, testing and commissioning as required.

Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, 120 sq. mm XLPE aluminium conductor cable of 11 KV grade as required :

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 120 sq. mm

Supply and Transportation of XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete.

Supply and Transportation of 0.5 HP Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 including testing & commisioning of the same.Makes : Kirloskar / Crompton / Texmo / CRI / KSB/Lubi / Havells Hi-flow V2 / PSG/ ARYEN VARSHA /Falcon/Suguna

Supply and Transportation of 1 HP Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 including testing & commisioning of the same.Makes : Kirloskar / Crompton / Texmo / CRI / KSB/Lubi / Havells Hi-flow V2 / PSG/ ARYEN VARSHA /Falcon /Suguna

Credit for dismantled materials old battery upto 18 AH

Credit for dismantled materials Wall Mount/Pedestal Fan (Old)

Credit for dismantled materials Exhaust Fan (Old)

Credit for dismantled materials Street Light Fitting (LED/HPSV – Old)

Credit for dismantled materials LED Tube Light / Panel Light (Non-working)

Credit for dismantled materials LED Bulb (Non-working)

Credit for dismantled materials CFL Fitting – 2 Pin / 4 Pin (Old)

Credit for dismantled materials Fluorescent Tube Fitting (Old)

Credit for dismantled materials Fan Capacitor (Old)

Credit for dismantled materials Miniature Circuit Breaker (MCB – Old)

Credit for dismantled materials Distribution Board (MCB Box – Old)

Credit for dismantled materials Electrical Switches (Various)

Credit for dismantled materials 5A / 15A Sockets (Old)

Credit for dismantled materials Call Bell / Buzzer

Credit for dismantled materials Old Copper Wiring (Mixed Gauge, Insulated)

Credit for dismantled materials Aluminium Wiring (Scrap)

Credit for dismantled materials PVC Conduits / Flexible Pipes (Scrap)

Credit for dismantled materials Armoured UG Cable (Aluminium Core) – Scrapped

Credit for dismantled materials ( payment to be made to ESIC inliue of dismantled materials available while replacing with new fittings: obtained as old unserviceable Iron Scrap.

Please Enable Macros to View BoQ information