Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Rejected-Technical | Rejected-Technical Not meeting eligibility criteria |
Tender Value
₹20.0 L
EMD Value
₹40,040
Closing Date
24 Apr 2024, 11:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Engineer, CEG
Civil Engineering Group, CDO Building, IGCAR, Kalpakkam - 603 102
Annual servicing and periodical maintenance of rolling shutters at IGCAR for the year 2024-2025.
2024_IGCAR_803646_1
CEG/IGC/1990/2024
Open Tender
Civil Works - Others
Item Rate
365 days
KALPAKKAM
8 documents required · 8 mandatory
₹0
₹40,040
28 May 2024
11 Apr 2024
25 Apr 2024
11 Apr 2024
24 Apr 2024
12 Apr 2024
Amount
Providing and fixing roofing sheet, cladding with 0.47mm thick colour coated concealed system profile corrugated/semi corrugated/plain Zincalume sheets of 55mpa yield stress (AS 1397 – Zincalume AZ 150) with coating class AS/NZS 2728 (minimum 150 grams per relevant standard) having a total coating thickness of 35 micron. The sheet should be rolled over specially designed concealed fixing clip manufactured from hi-tensile Aluminium Zinc alloy Zincalumen steel based and galvanized hooks. The clip should be fastened with minimum 40micron Zinc coated / minimum 25micron Zinc-Tin alloy coated. The rate is inclusive of all fixtures required for fixing the side roof, cladding on all sides, ridges etc. complete all as per specification and as directed by the Engineer-in-Charge.
Servicing the rolling shutters once in six months which includes greasing, oiling, overhauling and replacing defective spare parts (if required) including cost of grease, general cleaning, filling oil in gear set etc., but excluding cost of spare parts which will be paid separately all as directed by the Departmental Officers. (Replacement of bolts and nuts, screws, pints etc., is to be done by the Contractor without any extra cost. Rate is for one time operation and is valid and effective for 6 months without any operational problem from the date of overhauling). Note: Payment / Measurement will be made based on the clear structural opening dimension and hood will not be measured.
Repairing of steel rolling shutters of various sizes and various types such as hand operated, electrically operated etc., excluding spare parts which will be paid separately under the relevant item including welding, bolts, nuts etc. all complete and as directed by the Engineer-in-charge.
Providing and fixing of following new spare parts for rolling shutters of approved quality etc., all complete and as directed by Engineer-in-charge.
O Guage springs-1.5 feet length
O Guage springs-2 feet length
OO Guage springs-2 feet length
Worm wheel
Gear box(Three bewel wheel model)
MS Lath section (75mmx1.2mm thk)
GI Lath section (75mmx1.2mm thk)
End clips
Ball bearing
MS heavy duty shaft-50mm dia
MS heavy duty shaft-60mm dia
MS bottom lock plate of 3.15mm thick 125mm width with stiffeners 40x40x6mm angle beading etc. all complete.
Guide channel 100mm wide
Guide channel 75mm wide
Limit switch
Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members like trusses, purlins etc. using MS hollow / circular / square / rectangular tubular sections including chamfering and rounding off the edges, applying a coat of Red lead paint primer / Zinc chromate primer of approved make and 2 coats of flat oil paint / synthetic enamel paint of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge. Note: Lifting device arrangements if any required shall also be arranged by the contractor at his own cost.
Providing, fabricating and fixing of MS flat for roller drum, MS angle etc. including one coat of steel primer and two coat of synthetic enamel paint etc. complete all as per specification and as directed by the Engineer-in-charge.
Supplying and fixing Rolling shutters of approved make as per ISI standards made out of required size of MS Laths interlocked together throughout entire length and jointed together at the end by end locks mounted on specially designed pipes shaft with brackets, side guides and arrangements for inside & outside locking with Push and Pull type operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade No 2. and M.S. Top cover of required thickness for Rolling Shutters.
Rolling shutters PULL and PUSH type including top hood 1.25mm thick
Painting one coat of synthetic enamel paint of approved colour and make over rolling shutters/steel surfaces including preparation of surfaces, applying putty as per specification and as directed by Engineer-in-charge.
Dismantling the rolling shutters at all levels including the cost of labour for all and scaffolding including gas cutting(if required) etc., all complete and as directed by the Engineer-in-charge.
Refixing the rolling shutters at all levels including fixing anchors, welding gas cutting (if required ) etc. all complete and as directed by the directed by Engineer-in-charge.
Providing and fixing double Tubular scaffolding system using H-Frames / APS system or (cup lock type) on the exterior side upto seven story height made with 40mm dia M.S. tube 1.5m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in-charge. The elevation area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding.
Operating the Miscellaneous works for unquantified jobs for department as directed by the Engineer-in-charge. Note: If job is allocated to the contractor he has to engage minimum one fitter in general shift 9:00 to 17:30 hours per day for 1 unit.
Supplying and fixing of heavy duty ISI 1.5HP electrical motor "Siemens" or approved equivalent make output of RPM 1440 for operating the rolling shutter including suitable starter switch gear 35 RPM top and bottom limit switch including reverse forward switch starter BCH make or equivalent including Required GI conduit pipe with wiring for the Limit switches upto starter connections etc. complete all as per specification and as directed by the Engineer-in-charge.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .