GE (AF)/SGR-16/2024-25 REPAIR/REPLACEMENT TO TANKS, TANK CLEANING, LAGGING ETC OF MD ACCN UNDER AOR OF GE (AF) SRINAGAR

Amount

M&L for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20mm mesh including applying with brushing neat cement slurry with 3.0 Kgs of cement per Sqm complete including taking down of old lagging if required, complete all as specified and directed.

M & L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3.0 Kg of cement per Sqm complete including taking down of old lagging if required, complete all as specified and directed.

M & L for Lagging to pipes 25mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3.0 kg of cement per Sqm complete including taking down of old lagging if required, complete all as specified and directed.

S&F in repairs 15mm bore steel water tubes, 'medium grade', galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

S&F in repairs 20mm bore steel water tubes, 'medium grade', galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

S&F in repairs 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (Minimum weight 210 gms), complete all as specified and directed.

S&F in repairs covers for PVC over head water tanks any capacity (as per required), complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. of capacity upto 500 litres and re-fixing the float valve and plugging wash pipe including disconnecting existing tank and re-fixing in position, complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. of capacity exceeding 1000 litres and upto and including 2000 litres and re-fixing the float valve and plugging wash pipe including disconnecting existing tank and re-fixing in position, complete all as specified and directed.

Taking down existing Galvanised, Plain / Corrugated mild steel sheeting and re-fixing the same with L-type or J-type or cranked hook bolts, in roofs etc., complete all as specified and directed. Note :- The Contractor will check the refixed sheets for leakage / seepage and will ensure that there is no leakage / seepage after re-fixing of CGI Sheets.

S&F in repairs 15mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repairs 20mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repairs 15mm bib taps, fancy type, chromium pated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy quarter turn, chromium plated, fancy type, CP screwed down high pressure, complete all as specified and directed.

S&F in repairs 15mm bore Stop valve/angle valve, Fancy type, chromium plated, cast copper alloy screwed down high pressure with capstan head, complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debris out of defence land, complete all as specified and directed.

Demolition of cement concrete in ground floor & paving not exceeding 15cm above ground level, complete all as specified and directed.

M&L for 25mm thick cement concrete, 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base of floor finish even and rough to receive further floor finishes (tile/kata stone/ marble ), complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 07 to 08 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sum, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Glazed ceramic tile 600mm x 300mm x 06 to 07 mm (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed.

Preparation of old decorated or unplastered surfaces of walls or concrete surfaces including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc. including cornices, pilasters etc. (Plastered or un plastered surfaces) and applying one coat of cement based paint over a coat of primer including preparation of surfaces on walls, complete all as specified and directed.

M&L for 15mm thick cement plastering on fair faces in CM 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement but with using water proofing compound upto 12m height including taking down old plaster, complete all as specified and directed. (Note : WPC shall be measured and paid separately.)

Supply only water proofing compound.

Preparation of new plastered or concrete surfaces of wall and applying two coats of cement base paint upto triple storey height, complete all as specified and directed.

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule for Dismantling / Taking down Items) worth Rs.42,950.00 during AOC. Note :- Tenderers will not quote for this Schedule.

M/S GHULAM MOHAMMAD AND CO. (BID ID -3132199)

M/S TARIQ AHMAD SHEIKH (BID ID -3134885)

M/S M.R. Construction (BID ID -3134747)

M/S Abdul Ahad Rather (BID ID -3135190)

M/S SA INFRATECH (BID ID -3135356)

M/S ZAHOOR ENTERPRISES (BID ID -3134871)

M/S KHAN ENTERPRISES (BID ID -3134756)

M/S WANI AND SONS (BID ID -3135363)

M/S ABDUL REHMAN RATHER (BID ID -3135397)

M/S HAJI ZAHOOR HUSSAIN GANIE (BID ID -3135319)

M/S LATIF AHMED MIR (BID ID -3130092)

M/S GULZAR ENTERPRISES (BID ID -3134033)