Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-AOC 451 NEAR RADHA KRISHAN MANDIR VPO MAMUN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹24.9 L+₹518 (0.02%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹27.2 L+₹2.3 L (9.41%)Rejected-AOC H NO B III 95 MOHALLA GHARTHOLI MISSION ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-AOC Rejected |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N) Mamun
Garrison Engineer(N) Mamun Pin-145001
SPL REPAIR TO CERTAIN BLDGS, REV WORKS AND MINOR WORKS UNDER AGE B/R-I OF GE(N) MAMUN
2023_MES_586490_2
GE(N)/M-67/2022-23
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer(N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N) Mamun
₹50,000
14 Aug 2023
25 May 2023
21 Jun 2023
25 May 2023
19 Jun 2023
8 Jun 2023
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.
M&L for Box type steel windows & ventilators comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded wood grain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail and bottom railon either side and as gap insert for top rail & bottom rail; Panelling of wood grain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.
Hacking out old broken glass ( any thickness , size, quality, or description) from wooden / steel frame glazed with putty or fixed with beads, rubbish off the premises complete all as specified and directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.
S&F 3mm thick frosted/pin head glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.
S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F aluminium anodized barrel tower bolts 200 mm of extruded section (as per sample) fixed complete all as specified and directed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section (as per sample), complete all as specified and directed.
Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.
M&L for Rendering 10mm thick cement plaster on faces of brick work, concrete in cement mortar (1:6) finished even and fair without using extra cement complete all as specified and as directed.
M&L for Rendering 5 mm thick cement plaster in CM 1:3 on concrete surface of ceiling etc finishing the surfaces even and fair without using extra cement complete all as specified and directed.
M&L for Rendering 15mm thick cement plaster in CM 1:4 on brick masonery or other than fair faces of brick work, surfaces finished even and smooth without using extra cement complete all as specified and directed (WPC Paid separately)
Taking out peeled off plaster/ concrete surface, providing rust coating of PHRB-167/ rust free SHIELDOXY over old reinforcement and welded with new required reinforcemet, applying bonding adhesive chemical of STP/Fosroc over old concrete and M&L for plastering 10 mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, making the edges in line, in true shape and finishing the surface without using extra cement including rubbish off the premises complete all as specified and directed.
M&L for preparing newly plastered surfaces and applying two coats of cement base paint over one coat of primer on walls complete all as specified and directed.
M&L for three coats of white wash on surface of wall including preparation of new plastered surface complete all as specidfied and directed.
M&L for two coats of white wash on newly plastered surface of ceiling including preparation of surface complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over 15mm thick screed bed or bedding layers of mortar in CM 1:6 complete incl taking down of existing surfaces all as specifiedd and directed.
M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM (1:4) complete, dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.
Taking up or down steel water tubing and connections including cleaning for refixing of pipe 15mm bore complete all as specified and directed.
All as per item No 23 but 20mm bore.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.
All as above item No 25 but fixing only.
All as per item No 25 but 20mm bore.
All as per item No 27 but fixing only.
M&L for cutting chases, pinning in brick work, making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed.
S&F in repairs Vitreous china wash basin, white flat back, size 550 x 400 mm (as per sample), brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand including 32 mm dia waste pipe complete all as specified and directed.
S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy chromium plated fancy type (as per sample) ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore dia concealed type angle valve / stop valve (as per sample) cast copper alloy chromium plated fancy type with long shank and cup ISI marked with crutch or butter fly handles screwed down,screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair 15mm bore pillar tap cast copper alloy, fancy type, long neck, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe, ISI marked complete all as specified & directed.
S&F in repair 15mm bore dia Bib taps long nose, cast copper alloy, chromium plated fancy type ISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repair towel rail, brass, CP 600 mm long 15mm dia pipe of 1mm thick complete all as specified and directed.
S&F in repair over head shower 125mm size for 15mm bore pipe, cast copper alloy chromium plated fixed in repairs complete all as specified & directed.
S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed.
S&F in repair vitreous china, squatting Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including provision of lean concrete bedding, connection to drain out pipe, flush pipe, flush pipe and anti syphonage pipe etc, making good to floor where required complete all as specified & directed.
S&F in repair Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe including plastic seat and cover with stainless steel or aluminised hinging device and fixed complete all as specified and directed.
S&F in repair PVC low level flushing cistern 10 ltr capacity, inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.
S&F in repair PVC connection 15 mm dia & length 450 mm with PTMT nuts complete all as specified and directed.
M&L for Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) two layers, Capacity 500 litres, ISI Marked including all accessories, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old tank complete all as specified and directed.
S&F in repair 20mm bore dia gun metal globe or gate valves (as per sample) with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S&F Cast iron soil, waste and vent pipes, sand cast, 100mm bore in any length with or without ears with cement joints, fixed to walls with all fittings including taking down unservicable pipe with fittings complete all as specified and directed
S&F in repairs 100mm dia Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F in repair 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed
S&F in repair in 75 mm bore cast iron soil waste and vent pipes ISI marked (sand cast) in any length with or without ears laid in floor with cement joints complete all as specified and directed.
S&F in repair 75 mm bore cast iron soil waste and vent pipes ISI marked (sand cast) in any length with or without ears fixed to walls with clamps and cement joints complete all as specified and directed.
S&F in repair 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F in repair 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.
S&F Cast iron floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified and directed.
S&F PVC (SWR) 75mm bore vent cowl complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
S&F for PVC square road delineator, reflector type red/yellow colour in powder coated steel body protected in side polycarbonated sheet (as per sample) portected complete all as specified and directed.
S&F for Solar cat eye 3 LED of colour red/yellow to side ( 6 nos) house in tough pressure dia casted aluminium alloy of size 125x125x25mm (shank 65mm) with built in steam of suitable length for fixing with appoxy LED solar cell battery and light sensor well protected inside under tough under cable for 2 to 3 days (night) after full charge in 8-10 hours complete all as specified and directed.
S&F for Stainless steel round bar road delineator having reflector type red/yellow colour in steel body protected in side polycarbonated sheet, portected with powder coated wiremesh cage system mounted (as per sample) complete all as specified and directed.
S&F in factory made 25mm thick solid MDF prelaiminated board (cabin, Top of the table shall be made of 25mm thick MDF prelaiminated particle board duly edges bonded the under structure shall have 01 drawer, 01 caninet, 01 Keyboard and shelf for CPU. Cable management system provide in the cabin.) etc fixed with screws to any type of frame work etc complete all as specified and directed. (The work station shall be supplied & fitted on the site as per requirement ) Make- Ecocem, Rajshree or equivalent as approved.
M&L 0.80 mm thick PVC edge binding tape around the 25 mm thick MDF shutter edge colour as directed, complete all as specified and directed
S&F 125 mm size wooden fancy type handle (as per sample), fixed with screws complete all as specified and directed.
S& F 50mm dia, polished hard wood knobs (as per sample) with screws and washer , as complete all as specified and direcetd.
S&F Telescopic type Side channel of drawer of standard size including roller for moving drawer made out of mild steel bright finish or electro galvanised ( soft close ball bearing runners) with width of flap 30mm & 60mm long complete all as specified and directed.
S&F Stainless steel auto, zero crank hinges, fency type with concealed pattern fitted to shutters complete all as specified and directed.
M&L for aluminium profile 40mm thick duly powder coated for frame, made to shape, complete all as specified and directed
S&F lock brass 2 lever 50mm size locks, grade-I including 02 nos of kyes complete all as specified and directed.
Excavating in trenches n exc 1.5m wide and n exc 1.5m depth for foundation etc or for shafts, well, cesspits, manholes, pier holes, poles etc n exc 10 sq m on plan and n exc 1.5m depth and getting out in any type of soil complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.
M&L Brickwork with fly ash bricks (Old Size bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L for RCC M-25 ( Design mix) as in foundations including rafts, footings, foundations beams, plinth beams, bases for columns and basement slabs etc complete all as specified and directed.
M&L for RCC M-25 ( Design mix) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.
M&L for RCC M-25 ( Design mix) as in beams, cantilever, bressummers, lintels over 1.50m span complete all as specified and directed.
M&L for RCC M-25 ( Design mix) as in Chajja complete all as specified and directed
M&L for RCC M-25 ( Design mix) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including flat rough finished surafaces of concrete complete all as specified and directed.
Use and waste of formwork to sides of pillars, posts, struts, piers, columns, and stanchions, square, rectangular or polygonal in shape, including flat rough finished surafaces of concrete complete all as specified and directed.
Use and waste of formwork to sides and soffits of floor and roof beams, beams haunching, girders, bressummers, lintels and cantilever, shelves including supports over hangs etc rough finished surfaces of concrete (flat) complete all as specified and directed.
Use and waste of formwork to chullah hoods, chajjas, troughs & similar items including edges rough finished surfaces of concrete (flat) complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar works, flat, rough finished surafaces of concrete; not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs n exc 20cm wide & & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exc 20cm wide, rough finished surfaces of concrete complete all as specified and directed
Removal of surplus soil of any description to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified & directed.
All as per item 82 but 6 to 10mm dia bars.
M&L for filling, spreading & leveling of approved soil in floors, in layers n.exc. 25cm thick, well ramming including watering as required complete all as specified and directed
M&L for Hardcore of guage exc 63mm, broken Stones or Boulders deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed
M&L for PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.
M&L for 100mm thick cement concrete type D2 1:4:8 (40mm graded stone aggregate) as in sub floors, sub bases floors and pavings etc complete all as specified and directed.
S&F pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.
S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood, two panels with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L for preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed
S&F for 250 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed
M&L for 10mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth mixed with WPC as per manufacturer's instruction complete all as specified & directed. (WPC shall be measured & paid for separetaly)
M&L for PCC 1:2:4 type B-0 ( using 12.5mm graded crushed stone aggregate) padding as roof , surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet walls to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP having a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm using butane torch by torch application with 10cm side laps and 15cm end overlap of membrane. (d) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm or as prescribed by manufacture of membrane/ directed by Engr-in-charge.
M & L screed bed or bedding layers of mortar 15 mm thick in CM 1:4 for laying floor finishes, rough finished surface complete all as specified and directed.
M&L for green marble work 15-16 mm thick (table rubbed and polished) in cooking plateform, window cill, steps, stair case trade & riser etc in cement mortar (1:4), pointed in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of including demolition of old stones/tiles and rubbish off the premises complete all as specified and directed.
M&L for Round chamfering to the edges of marble slabs complete all as specified and directed.
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out any type of soil complete all as specified and direected.
M&L for 75mm thick PCC 1:4:8 type D-2, (40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
M&L for 25 mm thick sand cushioning under floors including watering and consolidation complete all as specified and as directed.
M&L for 60 mm thick factory made rubberized coloured (epoxy coated) interlocking paver block (using vibro compaction method) (topping thickness not less than 5 mm) in white cement and non fadable glossy pigment of approved shade of shape and size confirming to IS 15658-2006 M-35 grade complete all as specified and as directed.
M&L for PCC 1:3:6 Type C1 (using 20 mm graded crushed stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching to manholes, kneelers, apex stones,bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed
M&L for complete removal of existing treatment on walls by mechanical method, preparation of surface and applying wall care putty to obtain smooth surface (thickness not exc 1mm thick) and applying two coats of cement base paint over a coat of alkali-resistant priming paint complete all as specified & directed.
S&F for rotational moulded polyethlene water storage tanks of capacity 1000 litres, two layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float, including dismantling of existing PVC water storage tank and removal complete all as specified & directed.
S&F in repair 20mm bore dia gun metal globe or gate valves (as per sample) with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for including removal of rubbish complete all as specified and directed.
Dismantling brick tile or terracing tiles single layer on roof including bedding layer of mortar of any description, removal of rubbish complete all as specified and as directed.
Taking down carefully unsv copper/aluminium point wiring (light/fan/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders etc and making good disturbed surface of wall/floor with cement mortar and finishes to match existing surface.
M & L for point wiring using 3 x 1.5 Sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable(Phase, neutral and earth wire) drawn through and incl concealed conduit medium grade of dia not less than 20mm and 1.8mm thick and connected to common earth dolly with 1.6 mm thick cadmium plated CI/GI pressed steel sunken boxes and 3 mm thick plastic laminated sheet cover fixed with brass screws complete including cutting grooves for concealed wiring for light/fan/bell point controlled by one 1 way switch complete all as specified and directed. Note: 1. Conduit shall be fixed on surface/ceiling with necessary saddles where concealing of conduit is not feasible. 2. Connections of cable with MCBs or switch/sockets shall be done through proper size copper/brass pin/U type thimbles.
All as per item No. 110 but for one above but one 15Amp socket point with 3x2.5Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor.
Supply & fixing Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type, AC 240 volts complete all as specified & directed.
Supply & fixing switch piano flush type, single pole 15 amps, one way, AC 240 volts complete all as specified & directed.
S & F switch piano type flush button single pole one way 5/6 Amp AC 240 volts, complete all as specified & directed.
M & L for ceiling rose, PVC/Polycarbonate, insulated body, surface Bakelite 65mm dia three terminals complete all as specified & directed.
S&F 20W surface / wall mounted box type batten LED luminaire 4feet long, extruded PC housing with diffuser and integrated electronic driver with high efficiency long life, PF > 0.95, system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified & directed.
S&F 10W wall mounted box type batten LED luminaire 2feet long, extruded PC housing with diffuser and integrated electronic driver with high efficiency long life, system luminous efficacy≥100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified & directed.
Supply and fixing 5 star rated as per latest BEE specification BLDC ceiling fan, 230 V, 1200mm sweep with Min air delivery 210 CMM and service value not less than 6.00 complete with blades, down rod, canopy covers, 5step speed control fan regulator suitable for BLDC fan with accessories, including connecting with flexible copper conductor of suitable size and including fixing of PVC fan round sheet on ceiling and writing of MES No on fan complete all as specified and directed. Note: Rate of supplying and fixing of 5 Step speed control fan regulator suitable for BLDC fan on exisitng bakelite/hylum sheet deemed to be included in quoted rates.
Supply & fixing Energy saving, surface mounted, bulk head LED luminaire 10 W with aluminium housing & PC diffuser with IP 66 protection complete including connecting up with suitable size flexible copper conductor cable complete all as specified and directed.
S & F in replacement SPN MCB DB 4 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for fixing of DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed.
Supply & fixing MCB SP 240V, 50Hz, 10 KA, 6 to 32 Amp using copper thimbles of suitable size complete all as specified and directed.
Supply & fixing MCB SPN 240V, 50Hz, 10 KA, 32 Amp using copper thimbles of suitable size complete all as specified and directed.
M&L for earthing complete with Gl earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below GL ) with top edge of the plate not less than 1.5 m below the normal ground level connected galvanized earth lead wire 4.0 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50mtr, including PCC chamber in PCC (1 : 2 : 4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia light grade GI pipe for watering, 15 mm dia medium grade Gl pipe for earth wire protection with and including alternate layer of charcoal dust and common salt. complete all as shown in electrical plate No 3 connected to DBs all as specified and indicated including testing complete all as specified and directed.
Supply & laying in trenches or fixed to wall/pole or passing through pipe cable LT 1100 volts grade heavy duty,XLPE insulated , armoured heavy duty electric cable , with alumn conductor of any size 6 Sqmm x 2 core complete all as specified and directed.
Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed.
M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable complete all as specified and directed.
M&L for Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed.
M&L for cement concrete 1:3:6 type C1 ( using 20mm graded stone aggregate ) in road/floor repair including form work etc complete all as specified and directed.
Material and labour for GI tubing light grade 40 mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole incl 2Nos of FI clamps of suitable size with nuts and bolts incl taking up/down old GI tubing complete all as specified and as directed.
Supply and fixing of heavy duty 300 mm sweep, double ball bearing copper wounded metallic exhaust fan AC single phase 230/240 Volts having 1400+/-50RPM with minimum air delivery 1900 CMH including box type square shaped metallic louvers made out of powder coated CRCA sheet of thickness not less than 01 mm alongwith Aluminium flaps and fixed with grouting nut & bolts and making the suitable hole of suitable size by breaking the existing wall and making good the disturbed surface by plastering and matching with existing specifications with suitable finishes as per site requirement complete all as specified & directed.
Deduct : Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs. 76140.00 to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.
AV ENTERPRISES
M/S HIMANSHU BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .