COMPREHENSIVE REPAIR/ MAINT OF MD ACCN OF NAGDA ENCLAVE AND YOGENDRA SINGH ENCLAVE UNDER GE (W) JABALPUR

Amount

S & F in repair Decorative type solid PVC wall lining manufactured as per SSR Part-I specifications and drawing & colour/ pattern approved by Engineer-in-Charge, consisting of 5 mm thick wood grain printed PVC sheet and fixing with solvent cement on PVC frame complete all as specified and as directed.

Petty repairs to leaking water in bib taps, pillar taps, stop cocks, angle valves, PVC connections, waste pipes, float valves, concealed stop cocks, GI pipe joints, bottle traps etc of any description/ size by changing the washers, etc., or any other minor accessories to make the system functional complete all as specified and as directed.

Petty repairs to high / low level flushing cistern by adjusting the float valve, leakage in PVC connection, PVC / GI bend, including replacing of rubber washer, check nuts, plunges, etc., complete all as specified and as directed.

Easing door shutters for easy closing / opening by tightening hinges or changing the position of hinges, adjustment of tower bolts, etc., and including necessary builders hardware with new screws, bolts, washers, etc complete all as specified and as directed.

Easing window shutters, kitchen cupboard shutters, show case shutters, drawers adjusting handles, knobs, tightening piano hinges and including misc small adjustments with necessary builders hardware complete all as specified and directed.

S&F fancy type PVC coated MS drapery rod with brackets, 20-25mm bore, cut to length as required, colour as approved, complete all as specified and as directed.

S&F in repairs double legged door stopper of aluminium alloy with rubber overall length of cover plate 140 mm all as specified and directed.

S&F in repairs door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20mm dia, 'D' type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs 18/19 mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws as in cupboard shutters & shelves and pelmet boxes, etc., complete all as specified and directed.

S&F in repairs mild steel helical door spring 300mm ordinary rat tail type including roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S&F in repairs mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm complete all as specified and directed.

S&F in repairs aluminium alloy anodized sliding door bolt with hasp and staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed necessary rubber gasket in alluminium windows complete all as specified and as directed.

S&F in repairs aluminium anodized barrel tower bolt of extruded section, length of bolt 200mm complete all as specified and as directed.

All as described in Srl Item No 15 above, but length of tower bolt 150 mm.

S&F in repairs extruded aluminium alloy handle fabricated type 150mm size complete all as specified and as directed

All as described in Srl Item No 17 above, but of 100 mm size.

Hacking out old broken glass [any thickness, size, quality or description] from wooden or steel frames, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 4mm thick sheet glass ordinary quality and glazing with necessary rubber beading of reqired size, as in aluminium windows/ ventilators, complete all as specified and as directed

S&F 3mm thick figured glass pin head type and glazing with necessary rubber beading of any size complete as in aluminium windows/ventilators all as specified and as directed

S&F in repairs 15mm bore bib tap cast copper alloy chromium plated with fancy type crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and as directed

S&F in repairs Brass chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and as directed

S & F in repair Brass chromium plated bath Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed complete all as specified and as directed

S&F in repairs 15mm bore stop valves/ Angle cock chromium plated screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed

S&F PVC connection 15mm size with PTMT nuts, length 450mm, complete all as specified and as directed

All as described in Srl Item No 27 above, but of length 600mm.

S & F in repairs Health Faucet size 15 mm chromium plated with flexible tube, etc., complete all as specified and as directed

S&F in repairs chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed

S&F in repair Brass chromium plated bottle traps 32mm dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified & directed

All as described in Srl Item No 31 above, but of 40mm dia for sinks.

M & L for 75mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified.

S&F in repairs PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever, float valve and PVC bend and including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and as directed.

S&F in repairs 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahani trap in Cement mortar 1:6, complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, excluding flushing cistern & flush pipe and including connection to out going pipe and flushing pipe, complete all as specified and as directed.

S&F in repairs plastic water closet seat, white/ black, closed pattern with flat bottom and cover and fixed with mild steel chromium plated or aluminized hinging device, complete all as specified and as directed.

S&F in repairs vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets all as specified and as directed.

S&F in repairs Sheet glass assembly 5.5mm thick sheet glass, corner type, including chromium plated brass screws and wooden/ plastic cleats/plugs complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing complete for 15mm bore pipe all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing complete for 20mm bore pipe all as specified and directed

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying under floors complete all as specified and as directed.

Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed.

Taking down of eves gutter, rain water pipes of any size or pattern including all fittings etc complete all as specified and as directed.

S&F PVC (SWR) pipes, 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or fixed on walls complete all as specified and as directed.

S&F PVC (SWR) pipes, 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or fixed on walls complete all as specified and as directed.

S&F PVC (SWR) bends, ISI marked, any radius, 110 mm bore with access door complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 250 Liters and not exceeding 500 Ltr complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), capacity 500 Ltr, hoisted and fixed in position, complete all as specified and directed.

M&L for Welding in repairs not exceeding 2.5cm in length complete all as specified and as directed.

S & F Door Seal rubber of length not less than 1 mtr complete all as specified and as directed.

S&F in repairs continuous (Piano) hinges, mild steel, bright finish or electro galvanized, width of flaps (when open) 30 mm, complete all as specified and as directed.

Demolition of brick or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

All as described in Serial Item No 54 above, but except bricks.

Taking down cement plaster or cement lime plaster or wall tiles of any description on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water, etc, complete all as specified and as directed

M & L rendering 15mm thick on walls of brick or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M & L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed.

M & L for rendering 10 mm thick in CM 1:3 on ceiling in patches and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for grinding and polishing surfaces of old Kota/ marble/ granite stone flooring, skirting, etc., by hand or grinding machine, dusting off the surfaces after grinding, washing and mirror polishing complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust. etc., and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed.

Demolition of cement concrete as in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0 (12.50mm graded crushed stone aggregate) as in floors finished even and smooth using without extra cement in patches all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.16 sqm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match (in patches to match the existing colour /shade) over and including screed bed 15mm thick in CM 1:6 complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile not exceeding 0.36 sqm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shade) over and including screed bed 15mm thick in CM 1:6 complete all as specified and as directed.

M & L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm / 450 x 350 x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified and as directed.

M&L 20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like, over and including 20mm thick screed bed in cement mortar 1:4 and including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed.

M & L applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preparation of surfaces, complete all as specified and as directed.

M&L two coats of oil bound distemper (acrylic) white or tinted over one coat of chalk whitening/primer and including preparation of newly plastered surfaces of walls, etc., complete all as specified and as directed.

M&L for PCC (1:2:4) type B-0 (Using 12.50 mm graded stone aggregate) as in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap with and including grating 75 mm dia, jointing with solvent cement complete all as specified and as directed.

S&F in repairs PVC waste pipe of size 32 mm flexible with coupling for WHB/ Sink/ Urinal, etc., complete all as specified and as directed.

S&F in repairs CP brass soap tray/dish of approved make complete all as specified and as directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and as directed.

S & F in repairs sink with drain board made of stainless steel 1 mm thick with plugs, washer, wastes, brackets, etc., overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

Taking down chowkat or frame with shutters (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and as directed.

Taking down chowkat or frame with shutters (without taking of shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each complete all as specified and as directed.

Taking down shutters area exceeding 1.0 Sq mtr but not exceeding 2.00 Sq mtr each complete all as specified and as directed.

S&F pressed steel frames of 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed.

S&F pressed steel frames of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube in opening as per specification complete all as specified and as directed.

S&F 24 mm thick PVC flush door shutter having one side lamination with 2mm thick rigid PVC prelaminated sheet and 2mm thick plain rigid PVC sheet on other side consisting of frame made out of MS tubes of 19 gauge thickness and size of 19 mm x 19 mm for stiles as top, bottom & lock rail. MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multi chamber Hollow PVC section, bonded using solvent cement/cyanoacrylate adhesive with 5mm (+_0.25) thick Prelaminated PVC sheet of density 600 Kg/Cum manufactured by an ISO-9001-2015 certified company, on both side of the inside panel. Door to be fixed with frame with 3 nose stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of MS tube other hardwares should be fixed with 25 mm x 8 mm size steel screws etc complete all as specified and as directed.

S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

S & F powder coated (min thickness of powder coating 50 micron) Aluminium door, window, ventilator frame with one or more rebates and shutter including jointing cleat for fixing etc. including making good to the disturbed surfaces and matching existing treatment (cement base paint/ distemper/ white wash/ plastic paint) etc complete all as specified and as directed.

S&F powder coated aluminum window and ventilator shutters, side hung, without sash bars, aluminium section weighing 0.55 Kg/ RM, and including necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150 mm long (01 No), hinges type B-21 100mm long (02 Nos), suitable handle (01 No) and including making good to the disturbed surfaces complete all as specified and as directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

M&L two coats of synthetic enamel paint over a coat of red oxide primer and including preparation of new steel and iron surfaces over 10 cm width or girth complete all as specified and as directed.

S&F 100 mm long aluminium butt hinges alloy with galvanized MS hinge pin, anodized and fixed type C-21 complete all as specified and as directed.

S&F 150mm long aluminium anodized barrel tower bolt and fixed complete all as specified and as directed.

S&F 125mm long aluminium anodized handle cast type and fixed complete all as specified and as directed.

S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed.

S&F 65mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed.

S&F 150mm long MS barrel tower bolts, stove enamelled black with bright bolt and fixed complete all as specified and as directed.

S&F 125mm long MS pressed handles oval type stove enamelled black complete all as specified and as directed.

S&F 300mm long MS sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F 2nd class HW Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles not exceeding 200 cu. cm each complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces over 10 cm width or girth complete all as specified and as directed.

Sachdeva Enterprises (BID ID -3123586)

SHRI KRISHNA CONSTRUCTIONS (BID ID -3103838)