Providing, fitting and replacement of electro mechanical components of 10000 GPH x 40 meter head pump motor set at pumping station Sambal Gangera stage-0 and providing, fitting and replacement of electro mechanical components of 6000 GPH x 13 meter h

Amount

Providing, fitting and replacement of electro mechanical components of 10000 GPH x 40 meter head pump motor set at pumping station Sambal Gangera stage-0 by way of replacement of impeller-01 no., sleeves- 02 nos. bearings 6306-02 nos., gland plates-2nos. and remetalling of pump shaft and turning and finishing to original size. Job also includes remetalling of motor shaft, fabrication and fitting sleeves-2nos. and providing and fitting bearings of 20 HP motor. Providing and fitting of electro mechanical components to 30 HP motor starter by way of providing and fitting of moving and fixed contacts of copper, providing and fitting of over load coils, no volt coil, internal wiring and providing and filling of 5 liters transformer oil. Job also includes replacement of damaged 4” dia CI check valve to the suction of pump by providing and fitting of new one. Job includes the cost of material / labour charges, shifting of tools and tackles and rebate on old parts

Providing, fitting and replacement of electro mechanical components of 6000 GPH x 13 meter head mono block submersible by way of extraction of damaged mono submersible pump from dug well by extracting MS pipes one by one manually by using chain pulley block. Carriage of mono submersible to the workshop and then dismantling and extraction of the damaged part from the pump and providing and fitting of new part i.e. thrust pad-01 , cast iron impeller-1no, check nut-1no, remetalling to rotor shaft and fabrication and fitting of stainless steel shaft sleeves-2nos. at NDE and DE. Assembling of complete pumping unit. Carriage / transportation of pump to the pumping station and then lowering in the Dugwell that is open well by lowering the pipes one by one manually by using chain pulley block. Testing the pump sets on full load. Job includes the cost of material / labour charges, shifting of tools and tackles and rebate on old parts.

Rishabh Electricals and Mechanical Works

AMIT SALES CORPORATION