Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹52.6 LAccepted-AOC H NO 02 SAGAR ROAD OPPO MKD GIRLS SCHOOL TILAK NAGAR BIKANER 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L1 | Accepted-AOC Eligible | |
| 2 | L2₹53.9 L+₹1.3 L (2.48%)Rejected-AOC 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L2 | Rejected-AOC Not eligible | |
| 3 | L3₹55.8 L+₹3.2 L (6.02%)Rejected-AOC STREET NO 11 SECTOR NO 4 TILAK NAGAR SAGAR ROAD BIKANER 334 001 RAJASTHAN | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-AOC Not eligible | |
| 4 | L4₹56.3 L+₹3.7 L (6.99%)Rejected-AOC PLOT NO 46 WARD NO 08 OPPOSITE RADIO TOWER SAGAR ROAD TILAK NAGAR BIKANER 334003 RAJ | BIKANER | BIKANER | RAJASTHAN | 334003 | L4 | Rejected-AOC Not eligible | |
| 5 | L5₹56.5 L+₹3.9 L (7.38%)Rejected-AOC | L5 | Rejected-AOC Not eligible |
Tender Value
₹62 L
EMD Value
₹1.2 L
Closing Date
20 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF BIKANER
HQ CWE AF BIKANER
PROVN OF B AND R WORK SERVICES FOR KV SCHOOL AT NAL
2024_MES_646337_1
81562/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF NAL
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE AF NAL
₹1.2 L
Yes
3 Jul 2024
13 Mar 2024
27 May 2024
13 Mar 2024
20 May 2024
6 May 2024
13 Mar 2024 - 26 Mar 2024
Amount
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.
Material and labour for plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified and directed.
Material and labour Anti termite treatment for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.
Material and labour Anti termite treatment for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
Material and labour Anti termite treatment for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed .
Material and labour Anti termite treatment for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall all as specified and directed.
Material and labour for brickwork with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
Material and labour for rendering 15mm thick cement plaster in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15 mm thick cement plaster in CM 1:6 on fair faces of brick work finishing even and smooth without using extra cment complete all as specified and directed.
Material and labour for 5 mm thick ceiling plaster in CM 1:3 on fair faces of ceiling surfaces finishing even and smooth without using extra cment.
Preparation of new plastered wall surfaces and applying two coats of weather proof exterior acrylic emulsion in camouflage pattern over and including one coat of primer of exterior grade complete all as specified and directed.
Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of approved primer complete all as specified and directed.
Material and labour for Reinforced cement concrete nominal mix Type B1, 1:2:4 (20 mm graded aggregate) as in foundations, rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Material and labour for Reinforced cement concrete nominal mix Type B1, 1:2:4 (20 mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.
Material and labour for Reinforced cement concrete nominal mix Type B1, 1:2:4 (20 mm graded aggregate) as in chajjas complete all as specified and directed.
Material and labour for Reinforced cement concrete nominal mix Type B1, 1:2:4 (20 mm graded aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batten rough finished surfaces of concrete in flat complete all as specified and directed.
Form work to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete in square, rectangular or polygonal rough finished surfaces of concrete in flat complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete in flat complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide in rough finished concrete surfaces complete all as specified and directed.
Supply and fixing TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips.
Supply and fixing TMT bars 5mm dia and over upto and including 10mnm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips.
Material and labour for hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
Material and labour 25mm thick PCC 1:2:4, type B-0 using 12.5mm graded aggregate as in sub base of floor surface finished even & rough to receive floor topping complete all as specified and directed.
Material and labour for vitrified light shade ceramic tiles 10 mm thick polished, area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
Ditto all as per description of above ser item No. 28 here in before but as in skirting and over 10mm cement backing in CM 1:4 complete all as specified and directed.
Material and labour 75mm thick PCC 1:3:6 type C-2 ( using 20mm graded aggregate) as in plinth protection laid in alternate bays, surface finished even & smooth without using extra cement including making joints complete all as specified and directed.
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,rollers & dust proof brush for sliding door / window complete all as per architectural drawings and the directions of Engineer-in-Charge.
Supply and fixing 1.25 mm thick Pressed Steel door frames size 105x60mm for doors with one or more rebates inclding necessary fixing lugs, hinges, lock strike plate, etc including filling back hollow with PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate complete all as specified.
Supply and fixing 35 mm thick 2nd class hardwood, Plain, framed, panelled shutters (any number of panels), in with panels of timber flat on both sides (feather edged), of 12 mm BWP commercial ply with commercial veneering on both faces; supplied and fitted to chowkats all as specified and directed by Engr-in-Charge.
Supply and fixing Aluminium butt hinges medium weight, cold rolled, 100mm, ISI marked, fixed with stainless steel screws complete all as specified and directed.
Supply and fixing 200mm long aluminium anodised barrel tower bolt, extruded section,fixed with stainless steel screws complete all as specified and directed.
Supply and fixing 150 mm size extruded aluminium aluminium alloy handels fabricated type, anodised fixed with stainless steel screws complete all as specified and directed.
Supply and fixing 300mm aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) fixing clips of sheet, cast or extruded setions and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed with stainless steel screws complete all as specified and directed.
Supply and fixing 140mm long floor door stoper of aluminium alloy body and toungue, anodised wirh hard drawn steel spring, fixed to door shutter fixed with stainless steel screws complete all as specified and directed.
Supply and fixing steel work in tubular trusses, stanchions, purlin, girder, bracing etc. Including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St-310 and above including any other member specified in structural drawing complete all as specified and directed.
Supply and fixing MS plain plates, square cut, with riveted, bolted or welded attachment FE-410-W (Gde-E-250) quality A as specifed
Supply and fixing mild steel screw bolts (machine made) with hexabonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long, diameter of neck in 5 to 10mm complete all as specified and as directed.
Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated or semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Material and labour for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.
Surface excavation (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.
Material and labour 75mm thick Cement concrete type D2, 1:4:8 using 40 mm graded stone aggregate as in sub base of flooring complete all as specified and directed.
Material and labour sand cushion, filling under floors/tiles or in foundations including watering and consolidation complete all as specified and directed.
Material and labour Precast concrete paver block rubber moulded vibrator pressed, glossy finish of approved colour, shape & size confirming to IS 15658-2006 of 60 mm thickness with grey cement and pigment, M-35 Grade of approved colour and design complete all as specified and directed
Material and labour PCC 1:2:4, type B-1 using 20mm graded stone aggregate as in sides of rounded or chamfered on edges of interlocking/ chequered tiles complete all as specified and directed.
Supply and fixing 1mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
Supply and fixing MS Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
Material and labour for point wiring concealed complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sqmm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls/floors/ceilings etc by cutting chases using machine and making good the disturbed surface with and including sunken type pressed steel/welded MS terminal box 1.6 mm thick, bakelite laminated sheet top cover 3 mm thick and 1.5 sqmm copper earth continuity wire connected to earth dolly complete for ceiling/Ventilation/Exhaust fan point/light point controlled by one switch.
Description complete all as per item No 53 here in before but 1.5 sq mm cable size and 1.5 sqmm earth continuity wire for one 3 pin socket outlet, 5 amps on Independent board.
Description complete all as per item No 53 here in before but 2.5 sqmm cable size with 2.5 sqmm earth continuity wire for one 3 pin socket outlet, 15 Amps on independent board.
Supply and fixing Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type universal all as specified and directed.
Supply and fixing socket outlet 2 in 1, 3 pin, 5 Amp flush type universal all as specified and directed.
Supply and fixing switch piano flush button single pole one way 5 amp 240 volts, all as specified and as directed.
Supply and fixing switch piano flush button single pole one way 15 amp 240 volts, all as specified and as directed.
Supply and fixing for ceiling rose, surface bakelite, 65 x 50 mm, three terminals all as specified and as directed.
Supply and fixing sheet metal enclosures MCB SPN DB 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 with double glazed door for incorporating MCBs,IP-43 „ including taking down old unserviceable single phase DBs, all as specified and as directed.
Supply and fixing MCB SPN 40 amps 'C' series breaking capacity 10 KA, 'C, curve 240 volts, 50 Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc.
Supply and fixing MCB SP, 6 to 40 Amps, 'C' series breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED high bay round lights fitting 120 W, 220V, AC,IP-65 with driver, made of toughened glass and having lenses, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Material and labour for sub-main wiring with two single core 4 sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of masonary including 20 mm dia non-metallic PVC conduit fixed in wall including 4 sqmm copper earth continuity wire, accessories and connecting to earth dolly complete, (for AC points). Note : 2 Run of 4 Sqmm, 1 Run of PVC conduit & 1 Run of 4 Sqmm earth cable shall be measured as single unit length
Material and labour for sub-main wiring with two single core 2.5 sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of masonary including 20 mm dia non-metallic PVC conduit fixed in wall including 2.5 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, (for AC points). Note : 2 Run of 2.5 Sqmm, 1 Run of PVC conduit & 1 Run of 2.5 Sqmm earth cable shall be measured as single unit length
Supply and fix ceiling fans, complete with three blade, down rod,regulator, accessories 230V, 1200mm sweep, with Squirrel cage induction motor.
Supply and fixing Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting.
Supply, laying in trenches and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core complete all as specified and directed.
Supply and fixing sub class B bricks having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc complete all as directed.
Beenu Co. Company
Surya Buildcon & Engineers
M/S BUDHRAM BISHNOI
m/s gaurav enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .