SPECIAL REPAIR TO BUILDINGS P1, P5, P6 AND P7 AT KALINA AIRFORCE STATION MUMBAIUNDER GE (AF) THANE

Amount

Demolition of unreinforced concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) removing debris outside MOD land complete all as specified and directed.

Demolition of reinforced cement concrete in any position and in any description not otherwise specifically provided for complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection finishing even and smouth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2(40 mm graded aggregate) as in sub base surface complete all as specified and directed.

M&L Hardcore of Broken stone or boulders gauge exc 63 mm but n exc. 100 mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

Demolition of cement concrete (unreinforced), concrete of any description and in any position not otherwise specifically provided for floor complete all as specified and directed.

Dismantling of brick work or stone/boulder built in lime mortar or cement mortar including all quoins, arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles for portion ordered to be dismantled and removing debris outside MOD land complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks straight of curved on plan exc 6m mean radius built in in CM 1:6 complete all as specified and directed.

M& L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M & L for cutting out bricks, forming jambs ,toothing for and bonding new into old work incl value of new materials entering old walls and jointing and pointing in cement mortar (1:4) complete all as specified and directed.

M & L for Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floor & skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as approved by Engr-In-Charge complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors & skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as approved by Engr-In-Charge complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 as backing coat on wall surface incl preparation of surfaces to recieve dado finished complete all as specified and directed.

M&L for 900/450x7mm thick glazed coloured ceramic tiles as in vertical surface and jointed in neat cement slurry and pointed in white or coloured cement to match pattern approved by Engr-in-Charge complete all as specified and directed.

M& L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match complete all as specified and directed.

M & L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing on floor & Kitchen platform etc complete all as specified and directed.

M & L for Granite (of any type) tiles 20 mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M & L for Granite (of any type) tiles12mm thick , pattern plane , size 1200mm X 300MM and 1200mm x 600mm for staircase , floor etc complete all as specified and directed.

M & L for Machine cut cudappah stone slab 20 to 25 mm thick over cement screed bed , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and pointing complete all as specified and directed.

Taking down cement plaster on brick or stone walls,ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 10 mm thick cement plaster on Brick or concrete surfaces in CM 1:6 complete all as specified and directed.

M&L for 3mm thick wall care putty on wall incl preparation of surface complete all as specified and directed.

M&L for Preparing new plastered surfacesof wall, priming plastered and other surfaces with alkali resistant priming paint, and applying two coat of oil emulsion distemper complete all as specified and directed.

M&L for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with water proofing compound @ 3% by weight of cement including 10m height steel scaffolding complete all as specified and directed. [Note:- WPC shall be measured and paid separately ]

Supply of integral water proofing compound complete all as specified and directed.

M&L for preparing new plaster surfaces of walls applying one coat of weather coat primer and two coats of weather proof acrylic emultion paint all as per manufacturers instructions and directed including 10m height steel scaffolding complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work of ceiling complete all as specified and directed.

M&L for 3mm thick one coat of wall care putty on new ceiling surfaces including preparation complete all as specified and directed.

Material and labour for preparation of new plastered surfaces on ceiling and applying two coats of oil Emulsion distemper over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparing old plastered incl scraping of old paint surfaces of walls and applying one coats of oil bound distemper complete all as specified and directed.

M&L for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying one coat of weather proof acrylic emultion paint all as per manufacturers instructions and directed including scaffolding complete all as specified and directed.

M&L for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying two coats of damp proof paint all as per manufacturers instructions and directed including scaffolding upto 10m height complete

M&L for preparation of old surfaces plastered or unplastered on old surfaces of ceiling and apply one coat of Oil Emulsion distemper on ceiling complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed

Taking down chowkats or frame exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters only of any description exc 1sqm and n exc 2 sqm each complete all as specified and directed.

M & L for repairs to Aluminium window shutters of any description easing & adjusting without taking down area exc 1 sqm but n. exc 2 sqm incl repairs to lock, roller, glass wool, rubber beadings, refixing wiremesh excluding glass etc complete all as specified and directed.

S&F for 2nd class hard wood (Sal) plain solid straight chawkats and frames brought, framed rebated on solid rounded or chamfered put together with glue pinned at jointed complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with Block board core and plywoood face panels, commercial type on both sides with one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood glazed and skeleton shutters divided into squares with plain chamfered or rounded mitred and related sash bars number to received glass gauze etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats complete all as specified and directed.

S&F for 30mm thick 2nd class hard wood glazed and skelton shutters divided into squares with plain chamfered or rounded mitred and related sash bars number to received glass gauze etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats complete all as specified and directed.

S&F Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing will be painted to match with printed sheet complete all as specified and directed.

S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F door sliding bolt aldrop 250 mm long aluminium anodised complete all as specified and directed.

S&F in repair mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and directed.

M&L for 25 x 3mm FI holdfasts complete all as specified and directed.

S & F stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame including taking down old hinges all as specified and as directed.

S&F 150 mm size of handle extruded aluminium alloy handle fabricated type anodised complete all as specified and directed.

S&F aluminium andodized, 150mm length of bolt barrel tower bolts of extruded section complete all as specified and directed.

M&L for preparation new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamed paint over a coat of pink primer complete all as specified and directed.

S&F floor door stoppers of aluminium alloy body and toungue anodized with hard drawn steel spring over all length 140mm complete all as specified and directed.

M& L for Floor door stopper 150mm long , of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F Hat pegs Brass, solid body, 125mm to 175 mm etc complete all as specified and directed.

M&L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,Aluminium composite panel,C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.58 Sqm each in each pane complete all as specified and directed.

S & F 3 mm thick Figure glass/ tinted glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.58 Sqm each in each pane, louvers etc complete all as specified and directed.

S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work complete all as specified and directed.

Cutting holes in brick walls built in cement mortar depth of embedded portion of hold fast or lugs measured from the face of the jamb in to the wall exc half brick wall but n. exc one brick wall for in surting hold fasts and making good complete all as specified and directed.

M&L preparing of surfaces of wood and treatng with tar or coal tar black paint to ends of post backs of chowkats etc area tarred exc 0.10 sqm but n.exc 0.50 sqm complete all as specified and directed.

S&F floor door stoppers of aluminium alloy body and toungue anodized with hard drawn steel spring over all length 140mm.

M&L RCC M-30 (Using 20mm graded stone aggregate ) as in columns, pillars, piers, posts and struts ,ramp complete

M&L for TMT steel bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips in main bar complete

M&L for TMT steel bars 8mm dia cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips in stirrups complete.

M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces complete all as specifed and directed.

Dismantling plain or corrugated steel sheeting,any gauge,thickness, including Nainital or similar pattern roof covering in any position including necessary steel double scaffolding complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

S & F for Steel work in tubular trusses and similar works including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240,etc for ornamental and intricate design complete all as specified and directed.

S & F for Plates (plain ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A,flat iron, etc with ornamental and intricate design complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified etc complete all as specified.

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof ridge covering, fixed with self tapping screws using necessary scaffolding as specified and directed.

S & F for Mild steel screw bolts ( Machine made) with hexagonal or square heads at one end and screws the other or screwed both ends. each screwed and to be fitted with washers and one hexagonal or square nut length at bolt exceeding 5 cm but not exceeding 10 cm long for 11 to 15mm dia of neck complete.

M& l for Preparation of new steel surface of any description and treated with tar or coal tar black paint complete all as specified and directed.

M&L for Preparation of new steel surface not otherwise described and applying two coats of Aluminium paint over a coat aluminium red oxide primer complete all as specified and directed.

M&L for PCC 1:2:4 B-0 using 12.5mm graded aggregate as levelling course to finished even and smooth with using extra cement complete all as specified and directed.

M & L for rendering 10mm thick on CM (1:3) on concrete roof top and chajjas surface finished even and smooth to get uniform level surface for laying of membrane treatement,with using water proofing compound complete all as specified and directed.

M&L for APP modified roof treatment over exissting RCC roof complete all as specified and as directed by engineer -in-charge and as specified hereunder (a) Applying bitumen primer @ 0.40 lit/sqm with density of 0.87 kg/lit at 25 degree C on the prepared dry roof surface (b) Laying 4mm thick APP membrane including aluminium layer on top, weight not less than 3.50 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorised applicator of manufacturer of APP membarane. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 kg/sqm prescribed by manufacturer all as specified.

M& L for Post construction Anti termite treatment of soil under existing floors using emulsion chloropyrphos treatment of soil under hole, 300mm apart including drilling and plugging 12mm dia holes with cement morter 1:2 (1 cement : 2 coarse sand) to match existing floors complete all as specified and directed by Engr-in- charge.

M& L for providing and injecting chemical chloropyrphos emulsion (with 20% EC) for post construction antitermite treatment along external wall below concrete or masnory apron @ 2.25 Ltr per running meter including drilling and plugging complete all as specified and directed by Engr-in- Charge.

M& L for Post construction Anti termite treatment at point of contact of wood work by chemical emulsion Chloropyrphos (20EC) (in oil or kerosene based solution) @ 0.5 Ltr/ hole by drilling 6 mm dia hole at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engr- in -Charge.

Removing of existing concrete including loose / week conrete from the concrete structure ie. beems/columns/deckslab etc upto beyond corroded steel reinforcement to a depth of minimum 10mm behind the reinforcement by chipping / hacking with chisel and hammer or by mmechanical means like chisel hammer, pneumatic chippers inluding high pressure water jetting and removal of debris. Concrete around corroded reinforcement shall be removed properly. The edges of the repair locations of concrete should be saw cut to depth of at least 10mm to avoid featheredging and to provide a square edge complete all as specified and directed by Engr- in- Charge. Note : 10m Height of single scaffolding to be included in the quoted rates.

Demolition of cement concrete (reinforced) of roofs, floors, chajjas, and similar suspended work in any position all as per direction of Engr-in- charge. Note : upto 10m height of double scaffolding and formwork to be included in the quoted rates.

Preparation of surface and removal of rust in the loosely bonded concrete of the RCC deckslab, beam/girder shall be chipped out using the bars and applying rust remover using small brush and allow the react it for 16-40 hrs. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth complete all as per manufacturer instructions and directed by Engr- in- Charge. Quoted rates to include scaffolding costs

M&L for applying two coats of anti-Corrosive primer two component (epoxy anticorrosive zinc rich coating ) on reinforcement steel surfaces uniformely. Coating shall be applied by the brush of the exposed and cleaned rebars with in interval of 45 minutes to 1 hour @40 microns DFT/coat and allowed to completely dry for 24 hours complete all as per manufacturer instructions and directed by Engr-in-Charge. Quoted rates to include scaffolding and formwork costs.

M&L preparation of concrete surfaces by removing loose concrete dust, dirt etc. Cleaning the surface properly and applying one liberal coat of epoxy bounding agent (two component agent) by brush application to parent concrete complete all as per manufacturer instruction and directed by Engr-in-Charge.Quoted rates are inclusive of scaffolding and formwork costs.

M&L 50mm thick (average thickness) polymer modified single component alkaline resistent fibre reinforced, thixotropic, cementitious patch repair morter on conrete structure. Applying the morter around the reinforcement and finishing to bring it in line with existing contrete surface complete all as manufacturer instructions and directed by the Engr-in-Charge. Cured mortar should exhibit compressive strength of 20 MPa after 1 day and atleast 45 MPa after 28 days, tensile strength atleast 2.5 MPa after 28 days and flexural strength atleast 7 MPa after 28 days. Quoted rates to include scaffolding and formwork costs

M&L for micro concrete to existing concrete structure including proper tight leak proof shuttering SPL polimer modified cementitious , low pemeable " free flow' non shrink self compacting micro concrete shall be grade M50 as per recommended w/c ratio and pouring as per the required thickness complete as per manufcturer. Quoted rate include scaffolding and formwork upto height 10m complete.

M & L for Providing and executing injection/pressure grouting in cracks in the parent concrete by fixing PVC/Aluminium nipples at 150 mm to 200 mm distance or specified distances as per design and detailed specifications. Pressure grouting using low viscous epoxy grout Conbextra EP 10(M)- Moisture insensitive epoxy resin injection material supplied in 1.5 Litre pack which can grout gaps ranging from 0.25mm to 9mm, having mix density 1060 kg/m3,Compressive Strength(ASTM D695)-60/mm2, Tensile Strength(ASTM C 304-97)-20 N/mm2, Flexural strength(BS 6319 Part 4)-45 N/mm2. Pressure grouting shall be carry out after surface preparations includes fixing nipples and filling crakcs with epoxy mortar one day before grouting, injecting low viscous grout mechanically about pressure 3.5 - 7.0 kg/cm² , removing nipple after grouting and sealing with epoxy mortar etc complete as directed by EIC. Payment shall be made on actual grout consumed.Including necessary steel double scaffolding (upto 15 Meters Height from ground level) complete all as specified and as directed. HSE Guidelines : Conbextra EP10(M) : Contains resins which may cause sensitisation by skin contact. Avoid contact with skin and eyes and inhalation of vapour.Recommended to wear tight-fitting, dust-resistant, chemical splash goggles if airborne dust is generated, Wear protective gloves. Wear appropriate clothing to prevent any possibility of skin contact. Barrier creams provide additional skin protection. Keep away from sources of ignition - no smoking. Maintaine ample ventilation. Note(i) : Drilling and all other arrangements for nippal fixing shall be deemed to be included in the quoted rate. Note (ii) : Rates quoted for all items should include working upto 12m height including all necessary scaffolding , staging etc complete all as specified and as directed.

S&F 1000 Ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position upto 10m height of slab all as specified in SSR Part I including dismantling water tank.

S&F in repairs 15 mm size bib tap (Jaquar Model No. CON-CHR047KN or similar as per makes given in Appx 'B' of PS) cast copper alloy, chromioum plated fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and directed.

S&F in repairs 15 mm size bib tap (Jaquar Model No. CON-CHR047KN or similar as per makes given in Appx 'B' of PS) complete all as specified and directed.

S & F in repairs 15 mm size pillar taps (Jaquar Model No. CON-CHR011KN or similar as per makes given in Appx 'B' of PS) , cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm size stop valve or angle valve (Jaquar Model No. CON-CHR053KN or similar as per makes given in Appx 'B' of PS) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and as directed.

S&F in repairs 15 mm size stop valve, Angle cock (Jaquar Model No. CON-CHR053KN or similar as per makes given in Appx 'B' of PS) complete all as specified and directed.

S&F in repairs 15 mm size stop valve with long shank (consealed type) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and as directed.

S&F in repairs 15 mm size stop cock consealed type complete all as specified and directed.

S & F in repairs 15mm size 2-way Bib cock (Jaquar Model No. CON-CHR041KN or similar as per makes given in Appx 'B' of PS) with single handle and wall flange, Chrome Plating, complete all as specified and directed.

S & F in repairs Shower Overhead Rain shower SS 100 x 100 mm with 200 mm long shower arm and wall flange complete all as specified and as directed by Engr-In-Charge.

S & F 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S&F 15 mm size stop valve of PTMT any colour high pressure screwed for iron pipe, weight not less than 90 gms, including taking down old stop valve all as specified and as directed.

Material and labour in repairs 15 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete ,concealed fixed to walls / ceiling or laid to floors including taking up or down old tubing and connected fitting, fixture complete.

Taking up or down 20 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting fixture etc. from tubing complete.

Re-fixing of 20 mm bore galvanized iron tubing medium grade retrieved from item No 104.00 here-in-before, after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors complete.

Material and labour 20 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete.

Supply and fix in repairs 32 mm size waste pipe, length 1.20m for wash hand basin / urinal / sink complete all as specified and directed.

Supply and fix in repairs 40 mm size waste pipe length 1.20m for wash hand basin / urinal / sink complete all as specified and directed.

Supply and fix in repairs 32 mm size waste coupling of PTMT for wash hand basin / urinal / sink complete all as specified and directed.

Supply and fix in repairs 40 mm size waste coupling of PTMT for wash hand basin / urinal / sink complete.

Supply and fix in repairs Hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook complete all as specified and directed.

S & F in repairs Teflon tape adhesive sealant length 10 m , width 1.5 cm complete all as specified and directed.

S & F in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm concealed pipe fittings etc complete all as specified and directed.

S & F in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm concealed pipe fittings etc complete all as specified and directed.

S&F in repairs 10 Ltr capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float and handle, fixed in position and connecting including taking down old cistern complete all as specified and directed.

S & F in repairs syphonic set for vitreous china low level flushing cistern of any capacity complete all as specified and directed.

S&F vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin complete all as specified and as directed.

S&F vitreous china white Table top wash basin in repairs having size 450mm x 400mm x 160 mm , Rectangle bowl, Snow White in colour , complete all as specified and directed.

S&F plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed.

S&F polyethylene water tank cover with hinges suitable up to 2000 Ltrs tanks, including taking down old water tank cover all as specified and as directed.

S&F in repairs 15 mm size brass chromium plated zig zag type connector (coupling) for connecting wall mixer and GI tubing complete all as specified and directed.

Supply and fix in repairs 15 mm size wall mixer (Jaquar Model No. CON-CHR273KNUPR or similar as per makes given in Appx 'B' of PS), for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising bib tap with all connected accessories, fixed complete all as specified and directed.

S & f in repairs 6 mm thick corner glass self with aluminum / SS railing incl brackets for fixing ( size 300 mm x 300 mm ) etc complete all as specified and directed.

S & f in repairs 6 mm thick rectangular glass self with aluminum / SS railing incl brackets for fixing ( size 450mm x 150 mm ) etc complete all as specified and directed.

Supply and fix in repairs 15 mm size wash hand basin mixer (Jaquar Model No. CON - CHR167KNB or similar as per makes given in Appx 'B' of PS), for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising single hole bib tap with all connected accessories, fixed complete all as specified and directed.

S & F in repairs 15 mm size Single lever basin mixer (Jaquar Model No. CON - CHR167KNB or similar as per makes given in Appx 'B' of PS) with 300 mm extended body and 600 mm braided connection pipe (without pop-up) Chrome Plating , complete all as specified and directed.

S&F Vitreous china EWC floor mounted, white in colour having size of EWC 660x350x710mm including taking down old water closet (in repairs) (CERA CAT No S1013156 or similar as per makes given in Appx 'B' of PS), floor mounted EWC with including compbell plus, slim soft close seat cover, square bowl, concealed P/S trap, snow white in colour, including making good etc. complete all as specified and directed.

S & F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm to 100 mm dia pipe complete all as specified and directed.

M & L repair of leakage sunk slab Toilet : (floor Area of toilet not more than 3 Sqm) First Remove tiles, pipes, filled brick concrete, etc. from the sunken slab. Clean floor and side of the sunken slab properly of concrete or any other type Cover the brick masonry on all four sides by placing 6 mm diameter rods in 50 mm thick (1: 1.5: 3) concrete. Place a hole for drainage pipe as well as 40 mm diameter drainage spout pipe in the concrete of the outer wall Provide a slope of 1/40 towards the outside at the bottom concrete. Install a 40 mm diameter spot pipe in the outer wall at the end of the floor slope. Keep this spout pipe about 225 mm away from the outside wall. Then do plaster 12 mm CM 1:3 thick on the inner surface of the concrete by adding waterproof compound Apply two coats of polymer / PU on the inner side and floor of the sunken area. Apply two coats of 85/25 grade bitumen on it. Also, apply a bitumen coat on the GI Pipe.

Then lay a 150 mm thick brick bats coba layer at the bottom. Application of waterproof chemical in two layers Arrange 75mm dia PVC soil pipe without joints on it. Use the pipe in one piece so that there are no joints in the soil pipe. Once the Joints of the pipe are ready, fill it with water, and test for leakage after 24 hours and carry out smoke test. If seepage dampness occured then redo the plaster & other necessary treatment to stopped leakage or dampness. Note :- Rate shall be inclusive of all material and labours nothing shall be paid extra. After the joint test of the pipe, fill the top of the pipe and stone aggregate with cement concrete of 1: 5: 10. Laying tiles on top of cement concrete. Fill the joints of the tiles with acrylic waterproof paints, Epoxy lapi shall be use for fill joints make : fosroc or SIKA or equivalent .Size of floor tiles shall not less than 0.18 Sqm to 0.36 Sqm Non skid vetrified tiles patteren shall be approved by Engr-in-Charge.

Dismantling of 100mm (internal) cast iron drain pipes jointed in cement mortar and taking out complete all as specified and directed.

Dismantling of 75mm (internal) cast iron drain bend, single Y, socket pipes jointed in cement mortar and taking out complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with ruber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with ruber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) bends 110mm bore in mm any radius with access door complete all as specified and directed.

S&F PVC (SWR) bend 75mm bore any redious with access door complete all as specified and directed.

S&F PVC (SWR) 110mm bore branch piece, single (Single 'Y') equal or with acess door complete all as specified and directed.

S&F PVC (SWR) 75mm bore branch piece, single (Single 'Y') equal or with acess door complete all as specified and directed.

S&F PVC (SWR) 110mm bore WC connector with lip type ring complete all as specified and directed.

S&F PVC (SWR) 75mm diameter out let in mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) 110mm bore in mm vent cowl complete all as specified and directed.

S&F PVC(SWR) 75mm bore in mm vent cowl complete all as specified and directed.

S & F PVC 160 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with ubber ring joints fixed to wall complete all as specified and directed.

S & F PVC (SWR) bends 160 mm bore any radius complete all as specified and directed.

S & F in repairs PVC 110mm bore (SWR) coupler complete all as specified and directed.

S & F in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm complete all as specified and directed.

S & F in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm complete all as specified and directed.

S&F PVC(SWR) 75mm bore in mm vent cowl complete all as specified and directed.

S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed.

S&F grating doom grating doom 100 mm dia with waste hole of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F PVC connections for 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F PVC connections for 15mm size with PTMT nuts of length 900mm complete all as specified and directed.

M & l PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and directed.

M & L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in 15 mm size Kitchen sink faucet with pull down sprayer in stainless steel Dratal pull out sprayer faucet kitchen flexi spout brushed steel (DT-1) ( item dimensions - 32cm X 8cm x 8cm ) complete all as specified and as directed.

Supply and fix in repairs 25 mm bore mild steel heavy duty drapery rod (curtain rod) with 1.0 mm thick decorative PVC lining / sleeve outside, cut to length and fix in position including decorative type FINIALS (bracket) colored finish, of approved pattern complete as per sample kept in GE Office.

M & l in repairs stainless steel 'L' shape soft closing spring hinges for cabinets shutters complete all as specified and directed.

M & l in repairs GI push and pull channel brand of size 20"(51 CM) length for modular cabibets complete all as specified and directed.

S&F framed stainless steel sections as in drawers and pull up cuboards, design as approved of any size and shapes including clips and washers,etc to fix it to the prelaminated PVC sheets , plywood etc in cabinets,etc of stainless steel grade 304, all as approved and directed during execution complete all as specified and directed.

M & L in repairs for Plywood 18mm thick grade BWR type BB fixed with screws to timber frame, Al frame etc complete all as specified and directed.

Supply only for decorative Laminate type 1 of any thickness of surface finish, colour and pattern as approved, fixed with approved adhesive on plywood as per manufacturer instruction and as directed by Engr-in-Charge.

S & F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished complete all as specified and directed.

S & F in repairs hasp and staple safety type of size 100 mm of aluminium anodized including taking down old hasp and staple all as specified and as directed.

Magnetic catches for cupboard doors No.2 complete all as specified and directed.

S & F in repairs Vanity Mirror Cabinet for Washbasin | Premium Wall Mounted Storage Cabinet Bathroom with Door | Multipurpose Bathroom Cabinet Rack with Mirror (White) size 54D x 35W x 12H Centimeters, Wall Mount , Plastic etc complete all as specified and as directed by Engr-In-Charge.

Removing of existing water tank of capacity 500 lit, and refixing the same after completing the water proofing treatment etc as directed by Engr-in-Charge.

Removing of existing water tank of capacity 1000 lit and refixing the same after completing the water proofing treatment etc as directed by Engr-in-Charge.

Removing of existing water tank of capacity 2000 lit and refixing the same after completing the water proofing treatment etc as directed by Engr-in-Charge.

M & L for Re-securing or easing and adjusting without taking down shutters of any description and size all as specified and as directed.

Extra over rates for external teak wood lipping 6 mm thick fixed with nails complete all as specified and directed.

M & L in repairs (wooden ) fillet work using 2nd class hard wood exc 6 & n. exc 13 sq.cm fixed with screw, plane fillet square, rectangle in section clean swan, secuared with nails or brads complete all as specified and directed.

S & F in repairs for Steel rolling shutters, 1mm thick of laths without ball bearing ,as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle complete all as specified and as directed .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.

Taking down ceiling fan /EXHAUST FAN of any size or make and refixing the same all as specified and directed by Engr -in-Charge.

M&L Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade Conduit not less then 20 mm width with modular metal sunken switch with face plate for modular switch complete with brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified Note : (1) Making good to match with the adjoining surface shall be included in the unit rate. (2) Rate is inclusive of Cutting/chases of wall/floor/ceiling

One light point controlled by one, one way switch.

One light point controlled by two 2-way switches, cable 1.5 sq.mm size.

One ceiling /exhaust fan point controlled by one switch and regulator.

One 3 pin 5 amp socket out point on the same board with other switches.

One 3 pin 5 amps socket out let point on independent board.

Ditto all as per Ser Item No 178.00 above but for one socket outlet 15 Amp on independent board with 4 Sq mm cable and 2.5 Sq mm earth wire.

Ditto all as per Ser Item No 178.00 above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire.

Supply and Fix of Switch piano flush type single pole one way 5 Amp complete all as specified and directed.

Supply and Fix of Switch piano flush type single pole two way 15 Amp complete all as specified and directed.

Supply and Fix of Ceiling rose surface bakelite two to three terminal complete all as specified and directed.

Supply and Fix of Switch socket combined two in one 06 pin 5/15 Amps flush type universal complete all as specified and directed.

Supply and Fix of Switch Socket multipurpose 5 pin 5 Amps 240 V flush type complete all as specified and directed.

Supply and Fix of Lamp holder,insulated body with back plate and LED lamp complete all as specified and directed

Supply and Fix of MCB DB SPN 12 Way double door type 415 V with bus bar complete all as specified and directed

Supply and Fix of MCB SP 06 to 32 Amps 240 Volts complete all as specified and directed.

Supply and Fix of SPN 6- 40 Amps 240 Volts complete all as specified and directed.

Supply and Fix single pole and neutral enclouser with a two pin and earth and metal clad plug socket complete with one single pole MCB 25 Amp 240 Volts complete all as specified and directed.

NOTE FOR Ser ITEM NO 187.00 and 190.00 - (1).The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall./ DB tobe fixed on wall including frame made out of MS flat 40x5mm (2).The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface

S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat srink envioromentel friendly Energy efficient ready to use pack , 20 Watt , 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos etc. with 100lum/watt, CRI> 70, Surge protection 4 KVA.

Supply and fixing LED Light fitting Mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED Lamp including connecting up with three core flexible copper conductor cable of suitable size complete with 100lum/watt, CRI> 70, Surge protection 4 KVA.

M&L for sub main wiring with three single core 10 Sqmm FR PVC insulated with one run of Nutral Black Colour and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping/conduit with all fitting and accessories and one continuous run of 6.0 Sqmm copper conductor PVC insulated (green colour) as earth wire complete all as specified and directed. Note :-Five single core cables along with earth wire and Nutral and Casing -N-Caping shall be measured as one unit length

Supply and fix Electric storage water heater (Geyser) 25 Ltrs capacity, 230 volts, single phase, 50 Hz, of rated power 2000 Watt, rated water pressure .8 Mpa incl all accessories including taking down unservviceable geyser from existing place & deposited into AGE E/M (AF) Mumbai store yard and making good for disturbed surfaces, including water connection arrangement with sutable Hot/Cool Pipe as per spicefied and directed.

Supply and fix exhaust fan 300 MM sweep, 230 volts, 50 hz, metallic grey colour with louvers complete all as specified and directed.

M&L Earthing complete with copper plate electrode 60×60cm ×3.15mm size & copper strip 20 x 3 mm brazed with copper plate buried in ground not less than 1.5 Mtrs deep with PCC chamber complete all as specified and as directed means of bolts, nuts, check nuts and washers of brass check nuts and washers of brass including necessary earth work, PCC chamber , CI cover with frame, funnel, mesh, Earth lead protection pipe, 7.5 Meter Earth Lead etc all as shown in electrical plate No 5 in SSR Part-I and connected to earth test point/LT Panel/Transformer including testing on completion all as directed by Engr in-Charge

S K ENTERPRISES