Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 2 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
Tender Value
₹12.1 L
EMD Value
₹24,139
Closing Date
7 Sept 2026, 3:00 pmClosed
Executive Engineer
Office of Executive Engineer WD IV DDW Murida Fatorda. Mobile No. 9271144509
Design Supply Installation and Commissioning of a Variable Frequency Drive for 3 nos of 20 HP pump intergrated with pressure based feedback at Chicalim near cottage hospital in Dabolim Constituency
2026_DDW_31429_1
DDW IV/2062/13/2026-27 line18
Open Tender
Pumps/Motors
Percentage
45 days
dabolim
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,000
Yes
₹24,139
Yes
10 Sept 2026
28 Aug 2026
10 Sept 2026
28 Aug 2026
7 Sept 2026
28 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply, installation and commissioning of PLC control panel automation with variable frequency drive suitable upto 25 HP three phase control. The panel will consist of PLC, VFD, auto/manual changeover switchgears for 38 Amps along with the automation system to work two pumps at a time or all together during high demand and can be viewed real time on cloud with graphs on PC/phone using a SIM based 4G gateway. (Make : EME Automation, Delta or equivalent )3 numbers of Variable Frequency Drives to be provided in the panel with adequate protection such as input line chokes and surge protection devices. The specification of the Variable Frequency Drives is as follows: High performance compact vector control Variable Frequency Drive suitable for 18.5 kW / 25 HP three-phase motor control. Drive rated for 380–480 VAC, 3-phase input supply, with output current suitable for the selected duty (Normal Duty /Heavy Duty) application. Supports multiple motor control modes including V/F control and sensorless vector control.Provides reliable starting and stable operation under varying load conditions with optimized torque performance under | |||||
| 1.01 | sensorless vector control. Capable of wide output frequency range from 0 to 599 Hz, suitable for both standard and highspeed industrial applications. Equipped with built-in PLC functionality for implementing basic control logic and automation sequences. Integrated advanced motor protection features, including: a.Overcurrent protection b. Overvoltage protection c. Motor overload protection d. Phase loss detection e. Stall prevention f. Short circuit protection Provides overload capacity of up to 150% for 60 seconds (Heavy Duty rating), ensuring reliable operation during load fluctuations. Includes built-in RS485 Modbus communication for seamless integration with PLC, SCADA, and industrial automation systems. Designed for industrial environments with ambient temperature up to 40°C without derating and up to 50°C with derating, with efficient forced air cooling. Provides Safe Torque Off (STO) safety function compliant with applicable industrial safety standards. Compact and modular design enabling space-saving panel installation, easy maintenance, and user-friendly parameter configuration. 2. Advance interlocking automation panel with variable frequency drives, inbuilt SMPS, SPD (3+1) and other switchgears as per logic for pumping and valve control. 3. Integration of Manual/online switchgear 4. Custom logic and commands into the system based on engineer in charge. 5. PC/Mobile cloud application to view the status of pumps and parameters 6. Manual overide possible in case of emergency" | 1 | Job | 9,34,250 | ₹9,34,250 |
| 2 | Supply, installation and commissioning of pressure sensor dTRANS p30 for common pipe line pressure monitoring upto 10 bar. This sensor will be installed on the common discharge line with T joint and will be integrated in automation panel so the data can be viewed real time on local display and on cloud with graphs and trends on PC/phone. Make : JUMO or equivalent Basic Type : JUMO dtrans p30 - Pressure Transmitter Input : 0 to 40 bar relative pressure Output : 4 to 20 mA, two-wire Process connection : G 1/2 front-flush, with double gasket Material of process connection : CrNi (stainless steel) Electrical connection : Cable socket DIN EN 175301-803, Form A | 1 | Job | 45,450 | ₹45,450 |
| 3 | Development, programming and integration of secure cloud server application for PC and mobile. (Make : EME Automation, Delta or equivalent ) 1. Real time data visualization via custom animation and interface as per site engineer. 2. Various parameters from variable frequency drive and status of each pump. 3. Historical data server for long term monitoring and trends like graphs and day to day statistics. 4. Frequency of data monitoring is customized as per requirement. 5. Data from pressure sensor on main discharge line. inclusive of Subscription of SIM recharge, cloud server and mobile app included for 3 years | 1 | Job | 2,27,250 | ₹2,27,250 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.20 MB
Tendernotice_2.pdf
PDF • 0.31 MB
Tendernotice_3.pdf
PDF • 2.61 MB
Tendernotice_4.pdf
PDF • 0.38 MB
BOQ_31814.xls
BOQ • 0.36 MB
IMG_20260901_0001.pdf
PDF • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .