Construction of Rest house at Neyraks (by way of compound walling, land development, Air conditioner AC and 2 set local toilet at Rest house Neyraks). Under Distt. Plan

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil

Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Random rubble masonry with hard stone laid dry in foundation, plinth & walls Laid without bond stone

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for a) Suspended floors, roofs, landings, balconies and access platform

b) Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class Kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class Kail wood)

Providing and fixing round beams (local Ballies), including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete job; Average diameter 225 mm

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m3 Sqm 1758.31

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

20mm thick mud plaster using approved quality of earth.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm

Dumping stone excluding cost of stone on horizontal level.

Providing and fixinf of steel Jalli to ventilators with wooden beading

Providing and laying 60mm thick faciory made cement in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the concrete interlocking paver block of M-30 grade made by block making machine with strong vibratorycompaction, of approved size, design & shape, laid joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature,jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

“Providing, supplying, installation, testing and commissioning (SITC) of decorative Solar LED Pillar/Wall Light (3W–5W) with inbuilt solar panel, rechargeable Li-ion/LiFePO₄ battery, dusk-to-dawn auto sensor, IP65 weatherproof housing, suitable for fixing over gate pillars or compound wall coping, including fixing with anchor fasteners and all accessories, complete in all respects as per specifications and direction of Engineer-in-Charge.”.

Providing, supplying, installation, testing and commissioning (SITC) of Split Type Inverter Air Conditioner with Hot & Cold function (Cooling & Heating), suitable for 230V, 50Hz single phase power supply, of _ TR capacity, complete with indoor and outdoor units, copper refrigerant piping with insulation, drain piping, interconnecting power/control cabling, MS mounting brackets, remote control unit, vibration pads, and all necessary accessories, including refrigerant gas charging, earthing, and making good damages, complete in all respects as per specifications and direction of Engineer-in-Charge.” Complete Job

Providing, fabricating, supplying and fixing in position 12’-0” wide and 6’-0” high M.S. double leaf gate of approved design including preparation and submission of minor design details and fabrication drawings, cutting, welding, grinding, heavy duty hinges, tower bolts, locking arrangement, holdfasts and all fittings, complete with two R.C.C. gate pillars including excavation, PCC 1:4:8 bed, R.C.C. foundation & column in M20 grade concrete with reinforcement, centering & shuttering, curing, plastering in CM 1:4, RCC coping and finishing with one coat red oxide primer and two coats synthetic enamel paint, complete in all respects as per direction of Engineer-in-Charge. Complete Job

Carriage of material from source to site of work by Mechnical Transport including loading unloading and stacking. a) Cement and Steel an avg lead 110 Km

b) Sand an avg. lead 20Km

c) Stone aggregate an avg lead 20 km

d) Stone an avg lead 05Km