PROVN OF TOILETS PARKING AND ADDITIONAL INFRASTRUCTURE IN TECH AREA AT AF STN SURATGARH

Amount

BOQ (PROVN OF TOILETS, PARKING AND ADDITIONAL INFRASTRUCTURE IN TECH AREA AT AF STN SURATGARH)

Excavation in trenches nexc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out in hard/dense soil for laying cables, erection of poles, complete all as specified and directed.

M&L for RCC design mix M-25 (using 20mm graded stone aggregates) in columns, pillars, posts & struts, complete all as specified and directed. Note:-reinforcement to be measured separately.

M&L for RCC design mix M-25 (using 20mm graded stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete complete all as specified and directed. Note:-reinforcement to be measured separately.

M&L for RCC Design mix M-25 (with 20mm graded stone aggregates) in beams, cantilevers,bressummers, lintel over 1.5 m span, complete all as specified and directed.

M&L for RCC Design mix M-25 (with 20mm graded stone aggregates) in slabs supported on walls, beams, and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete, complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exceeding 200mm thick (horizontal or slopping) for rough finished surface of concrete, complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.for rough finished surfaces of concrete, complete all as specified and directed.

Use and waste of square or rectangular formwork to sides of pillars, posts, struts, piers, columns and stanchions etc.for rough finished surfaces of concrete, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.

S&F for mild steel TMT reinforcement bars 10mm dia and over cut to length and bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in reinforcement, complete all as specified and directed.

All as per ser item No 11 here in before but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

M&L for brick work wih sub class 'B' bricks straight or curved on plan exc 6m mean radius , built in cement mortar 1:4, complete all as specified and directed.

M&L for 15mm thick rendering on brick or concrete surfaces in CM 1:6, finished even and smooth surface wihtout using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering using WPC in cement mortar 1:4 to brick or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1:3 furnished even & smooth without using extra cement as on ceiling, complete all as specified and directed.

Supply only integral waterproofing compound, complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in coping including weathering slightly rounded or chamfered angles grouted, complete all as specified and directed.

Returning, filling in, including spreading , levelling, watering and well ramming of approved earth of soft/loose soil in layers not exc 15cm thick each, complete all as specified and directed.

M&L for removal of surplus spoil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of water based exterior acrylic emulsion in camouflaging ( in multi colour pattern shall be approved by GE) after applying a coat of exterior (water based) primer on plastered surfaces. complete all as specified and directed.

S&F for white viterous china battery based infrared sensor operated urinal of approx size 480mmx300mmx740mm having pre & post flushing with water, including fixing to walls, complete all as specified and directed. Make : Jaquar Cat No URS-WHT-13255 & SNR-CHR-51097 or Equivalent of GROHE/Mark.

S&F for 12mm thick forsted toughened glass as urinal partition OF Size 900mmX450mm fixed with stainless steel brackets & clamps, complete all as specified and directed. Make : Jaquar Cat No JSE-CHR-810UC450X or Equivalent of GROHE/Mark.

S&F for sensor based hand drier having stainless steel finish fixed in position, complete all as specified and directed. Make : Jaquar Cat No HDR-SAP-M99ACS or Equivalent of GROHE/Mark.

S&F for wall hung WC of size 360mmX540mmX405mm with soft close seat cover, complete all as specified and directed. Make : Jaquar Cat No.: FNS-WHT-40951 & FLV-1073C or Equivalent of GROHE/Mark.

S&F for viterous china counter top wash hand basin of size 700mmX435mmX135mm, complete all as specified and directed. Make : Jaquar Cat No.: ARS-WH-39903 or Equivalent of GROHE/Mark.

S&F for CP brass 32mm dia waste coupling of 130mm height for WHB, complete all as specified and directed. Make : Jaquar Cat No.: ALD-WHM-709 or Equivalent of GROHE/Mark.

S&F for CP brass 32mm bore bottle trap (with internal partition) with 300mm & 190mm long wall connection pipes & Wall flanges, complete all as specified and directed. Make : Jaquar Cat No.: ALD-CHR-769L 300x190 or Equivalent of GROHE/Mark.

S&F for 600mm long braided hose with two 15mm nuts & O-ring rubber washer, complete all as specified and directed. Make : Jaquar Cat No.: ALD-CHR-801B or Equivalent of GROHE/Mark.

S&F for CP brass hand shower (health faucet) with 8mm dia 1m long flexible tube & wall hook, complete all as specified and directed. Make : Jaquar Cat No.: ALD -579 or Equivalent of GROHE/Mark.

S&F for 15mm bore CP brass Bib Cock auto closing system with built in control cock with wall flange, complete all as specified and directed. Make : Jaquar Cat No.: CON-047 or Equivalent of GROHE/Mark.

S&F for stainless steel toilet paper holder with Flap recessed type, complete all as specified and directed. Make : Jaquar Cat No.: CAN-CAN-1153S or Equivalent of GROHE/Mark.

S&F for slim concealed cistern with floor mounting frame, installation kit and 'P' type drain pipe connection set for wall hung WC (without flushing plate) complete all as specified and directed. Make : Jaquar Cat No: JCS-WHT-2431FS or Equivalent of GROHE/Mark.

S&F for control plate segment chrome plated flushing plate for concealed flushing cistern, complete all as specified and directed. Make : Jaquar Cat No.: JCP-CHR-102425 or Equivalent of GROHE/Mark.

S&F for soap dispenser with glass bottle, complete all as specified and directed. Make : Jaquar Cat No.: SDR-WHT-DJ0010F or Equivalent of GROHE/Mark.

S&F fpr soap dish, complete all as specified and directed. Make : Jaquar Cat No.: CAN-BCH-1131N or Equivalent of GROHE.

S&F for single towel ring, complete all as specified and directed. Make : Jaquar Cat No.: CAN-CHR-1121N or Equivalent of GROHE/Mark.

S&F for 15mm bore sensotronic sensor faucet for Wash basin with 175mm extension body, complete all as specified and directed. Make : Jaquar Cat No.:SNR-CHR-51021A or Equivalent of GROHE/Mark.

S&F for 15mm bore CP brass angular stop cock with wall flange, complete all as specified and directed. Make : Jaquar Cat No.: CON053KN or Equivalent of GROHE/Mark.

S&F for shower with complete all as specified and directed. Make : Jaquar Cat No.: 35783KPM & OHS-CHR-1999 or Equivalent of GROHE/Mark.

M&L for 12mm thick Gypsum board as in ceiling/lining fixed with counter sunk screws on & including GI channels frame work of standard section as per manufacturers instruction , fixed @ 1.2m in one direction and 45cm in C/C in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and including two coats of plastic emulsion paint over a coat of primer on exposed surfaces, the frame work shall be fixed with the help of GI suspenders of suitable size with the help dash fasteners and along wall, making good disturbed surfaces smothening the gypsum board, POP lining at joints panning as required complete all as specified and as directed including dismantling of existing false ceiling, complete all as specified and directed.

S&F for powder coated aluminium window/ventilator using 63mmX38mmX1.6mm chowkhats with 45mm X 45mmX1.6mm openable section as in shutter including 5.5mm thick glass panes of approved make with rubber for fixing glass and including builder hardware such as aluminium handles 100mm - 02 Nos, tower bolts 100mm 02 Nos, hooks and eye - 02 Nos 150mm, butt hinges 100mm 04 Nos etc, complete all as specified and directed.

S&F for 0.65mm thick sunmica of the approved shade & pattern on the existing woodwork, complete all as specified and directed.

S&F for 3mm thick teak plyboard with teak face veeners on one face on the existing woodwork, complete all as specified and directed.

M&L for Digital printed wall tiles of size 300mmX 450mmx7mm thick as in vertical surfaces set and jointed in neat cement slurry with spacers and pointed in epoxy tile grout to match the shade over and including 10mm thick rendering in cm 1:4, complete all as specified and directed.

M&L for coloured digital printed ceramic non-skid tiles area of tiles exc 0.06 sqm but not exc 0.18 sqm and 7mm-8 mm thick laid in floors with spacers, set and jointed in neat cement pointed in epoxy tile grout to match the shade over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) in platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing, complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm grade stone aggregate) as in plinth protection finished even and smooth without using extra cement, complete all as specified and directed.

Forming construction joint 30mm deepx10mm wide filled with grade 'A' sealing compound, complete all as specified and directed.

M&L for hardcore of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface in broken stones or boulders, complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B2 (using 40mm grade stone aggregate), as in sub base in floor/pavings etc finished fair and even without using extra cement, complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/ rectangular) polished area of each tiles not exc 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 15mm thick screed bedding in CM (1:6), complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick ( square/ rectangular) polished area of each tiles not exc 0.36 sqm in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including rendering 10mm thick in CM 1:4, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (20mm graded stone aggregate) in kerbs of mud stops, rounded or chamfered on edges, complete all as specified and directed.

M&L for 10mm thick rendering on roof for laying in CM 1:4 waterproofing treatment, with using WPC, complete all as specified and directed. Note:-WPC will be measured and paid separately as supply only.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over a tack coat of dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning over primed surface. Top of APP based polymeric membrane complete all as specified and as directed by Engr in Charge.

M&L for 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement on mud phuska, complete all as specified and as directed.

S&F for aluminium anodised, coloured powder coated door chowkats with one or more rebate using section of size 101.60mm x 44.75mm x 3.18mm with jointing cleats for fixing etc fixed to wall complete all as specified and directed.

S&F aluminium (extruded section body) door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg, complete all as specified and directed.

S&F for aluminium window and ventilator shutters, sliding type with two track without sash bars, aluminum sections of size 40mmx20mmx1.5 mm fixed in aluminum anodised frame of section size 63.5mmx38.18mm x2mm including necessary jointing cleats, glazing clips , aluminium anodised snap beading ,screws,aluminium beading , pvc packing , aluminium anodised fittings & fixtures with and including stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperature 1.40mm and fixed with tinned tacks or steel wire staples and necessary fittings & fixtures including powder coating of thickness n.exc 50 micron on all aluminum section ,complete all as specified and directed by Engineer -in-charge. NOTE: Rate of mild steel wire shall be included in quoted rate of this item .Nothing extra shall be admissible on this account

S&F Aluminium window shutter sliding type of size 40x20x1.5 mm in section fixed in aluminum anodised frame of section size 63.5mmx38.18mm x2mm including necessary jointing cleats , glazing clips , aluminium anodised snap beading ,screws,aluminium beading , pvc packing , aluminium anodised fittings & fixtures with and including 4.80 mm thick tinted glass with necessary beading / packing and necessary fittings &fixtures all as specified and directed by Engineer -in-charge.NOTE: Rate of Glazing shall be included in quoted rate of this item .Nothing extra shall be admissible on this account. .Make-Hindalco/ Jindal

S&F for aluminium chequered grills as on aluminium windows, weight not exc .0.50 kg / sqm and fixed , complete all as specified and directed by the Engineer in charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth, complete all as specified and directed.

S&F of medium grade GI tubing 15mm bore with all fittings , to walls, ceiling or laid in floors etc, complete all as specified and directed.

All as per ser item No- 66 above here in before but in 20mm bore pipe, complete all as specified and directed.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe to 15mm bore pipe, complete all as specified and directed.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe to 20mm bore pipe, complete all as specified and directed.

S&F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia out let, complete all as specified and directed.

S&F for PVC (SWR) multi floor trap with grating including jointing with solvent cement 100mm dia out let, complete all as specified and directed.

S&F for PVC (SWR) pipes of 110mm dia, single socketed fixed to walls, complete all as specified and directed.

S&F for PVC (SWR) pipes of 75mm dia, single socket fixed to walls, complete all as specified and directed.

S&F for 100mm bore of pipe stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S&F for PVC (SWR) bends of 110mm dia, any radius, complete all as specified and directed.

S&F for PVC (SWR) vent cowl, 100mm dia, complete all as specified and directed.

M&L for 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement on mud phuska, complete all as specified and directed.

M&L flush pointing to brick laid flat or brick tiles in paving cement mortar in 1:3, complete all as specified and directed.

S&F for 19/20mm Pre-laminated partical board exterior grade both side laminated board fixed with screws, complete all as specified and directed.

S&F for 40mm width continous (piano) hinges,mild steel bright finish or electrogalvanised, complete all as specified and directed.

S&F for magnet catcher suitable for cupboard shutter, complete all as specified and directed.

S&F for stainless steel handle suitable for cupboard shutter, complete all as specified and directed.

M&L for Bricks work with sub class 'B' bricks brick old size straight or cuvred on plan to any radius in half brick thick wall built in cement morter 1:4, complete all as specified and directed.

S&F for 8mm thick hollow printed coloured PVC sheet wall lining/panelling including frame work (sample kept in GE office) made of 1mm thick PVC sheet in strips and channels feathered at the edges for fixing of wall lining inclusive of solvent cement and fixing at site, complete all as specified and directed by Engineer-in-Charge

M&L for 5mm thick, rendering in cement mortar 1:3 on surfaces of ceiling and finishing the surface even and smooth without using extra cement, complete all as specified and directed.

S&F for 1000 litres capacity rotational moulded polyethylene White water storage tanks (Cylindrical vertical with thread cover closed top) double layered, hoisted & fixed in position including GI tank nipple and with union (two No each) fittings and making necessary connections to make the tank functional, complete all as specified and directed.

S&F PVC float valve 15mm dia, high pressure with polythene float and fly nut screwed for iron pipe or brass ferrule, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls/ceiling and applying two coats of oil bond distemper on over 2mm thick of birla putty, complete all as specified and directed.

M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured), complete all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 Type D-2 using 40mm crushed stone aggregate as in sub base floor, complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge not exc. 63mm , deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&l for 40mm thick PCC 1:2:4 type B-1 (using 20mm gradrd stone aggregate) finish even and smooth with using extra cement, complete all as specified and directed.

S&F for glass dividing strip 3mm thick 38mm wide and insert in position to conform to design, complete all as specified and directed.

S&F for Mild steel plates, plain or chequered, in 5mm thick or over in thickness in available sizes, Fe 410-W (Gde E-250) quality, complete all as specified and directed.

S&F for steel work in tubular truss including spercial shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade st-240, complete all as specified and directed.

S&F for stucural steel work in tubular/square tube as poles trusses and angle etc including special shaped washer , gusset/ bearing plate etc. including FI 40mmX4mm complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240, complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/ loose soil each not exc 0.5 Cum, getting out, returning, filling in , removing surplus soil to distance not exceeding 50.00 mtr and raming earth or broken rubble mixed with earth around, in layers not exc 25cm, complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40mm graded stone aggregates as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel ordinary tint overa coat of red oxide primer of any description exc 10cm width or girth, complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof coverings /vally/gutters, fixed with self tapping screws including scafoldings of any hieght, complete all as specified and directed.

M&L for forming embankments including raising (or lowering) earth, spreading in layers not exc. 30 cm thick;watering, ramming and finishing to required size, shape etc, not exc. 1.5 m high from base, as specified and directed by Engineer in charge

Surface excavation not exc 30 cm deep and averaeging 15cm deep in soft/loose soil and getting out complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2021 of 60mm thickness, M-35 Grade with grey cement and pigments, complete all as specified and directed.

M&L for 25mm thick Sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed.

Excavating over areas exc 1.5m deep and not exc 3m deep getting out in soft/loose soil, complete all as specified and directed.

Excavating over areas exc 3 deep and not exc 4.5m deep getting out in soft/loose soil, complete all as specified and directed.

M&L for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4, complete all as specified and directed.

M&L for hardcore of broken bricks in Loose filling with aggregates of gauge 80mm to 150mm in soakage pits, soakage wells, complete all as specified and directed.

M&L for 150mm internal bore dia double wall corrugated PE pipes laid in trenches and jointed and testing complete with all necessary hardware, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe line, complete all as specified and directed. Note : NP3/DCW pipe will be measured and paid seperetely.

M&L for RCC 1:2:4, type B1 (using 20mm graded stone aggregate) Precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4, complete all as specified and direceted.

M&L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through in concealed and including non metallic medium grade rigid PVC conduit of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc. complete all as specified and directed.

All as per ser item No 116 here-in-before but 5 Amps socket point independent, complete all as specified and directed.

All as per ser item No 116 here-in-before but 5 Amps socket point on same board, complete all as specified and directed.

All as per ser item No 116 here-in-before but cable of size 2.5 sqmm for one 16 amps socket (Power) point independent, complete all as specified and directed.

M & L for surface submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through in concealed conduit and including non metallic medium grade rigid PVC conduit of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces, complete all as specified and directed. NOTE:- Two runs of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

All as per ser item No 120 here-in-before but cable of size 2.5 sqmm, complete all as specified and directed.

All as per ser item No 120 here-in-before but cable of size 6.0 sqmm, complete all as specified and directed.

S&F for 5 Amp switch piano type single pole one way, complete all as specified and directed.

S&F for socket flush type 6 amps, 5 pin, 230v, complete all as specified and directed.

S&F for switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v incl dismentling taking down unsv one, complete all as specified and directed.

S&F for ceiling rose surface bakelite three terminal, complete all as specified and directed.

S&F for MCB, single pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve including dismentling taking down unsv one complete all as specified and directed. MAKE- Cat Part No- 4085-87 to 4085-95 of Legrand or equivalent of Schneider/ABB.

S&F for MCB, double pole, 6 to 32 amps, 415 Volts, 10 KA breaking cap, ‘’C” curve, complete all as specified and directed. MAKE- Cat Part No- 4086-28 to 4086-36 of Legrand or equivalent of Schneider/ABB

S&F for MCB, four pole, 40 to 63 amps, 415 Volts including dismentling taking down unsv one complete all as specified and directed. MAKE- Cat Part No- 4087-00 to 4087-02 of Legrand or equivalent of Schneider/ABB.

S&F for MCB distribution board, IP 43 protection, double door, metal enclosure, SPN, 230 Volts, 8 way one, complete all as specified and directed. MAKE- Cat Part No- 6077 11 of Legrand or equivalent of Schneider/ABB.

S&F for MCB distribution board, Double door, metal enclosure , SPN, 230 Volts, 4 way one, complete all as specified and directed. Make- Cat part No 5076 10 of Legrand or or equivalent of Schinder/ABB

S&F for metal plug and socket board with MCB SP 20 amp, 16 KA, complete all as specified and directed. MAKE- Cat Part No- 5078 11 of Legrand or equivalent of Schneider/ABB

S&F for MCB distribution board, double door, metal enclosure, TPN, 415 Volts, 4 way incl dismentling taking down unsv one, complete all as specified and directed. MAKE- Cat Part No- 5076-70 of Legrand or equivalent of Schneider/ABB

S&F for LED batten fitting ' 2' long, 10 watt, CDL 230 Volts , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable with mounting casing box 2 nos incl dismentling taking down unsv fitting any type, complete all as specified and directed. Make-CG Cat Part No- CCS-103-10-65-HL2-DP-NWH or equivalemt in Bajaj/Philips/Havells

S&F for LED fitting, 20 watt, CDL, 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos incl dismentling taking down unsv fitting any type, complete all as specified and directed. Make-CG, Cat Part No CCS-100-20-65-HL2-DP-NWH or equivalemt in Bajaj/Havells/Philips

S&F for square shaped recess mounted LED Flat panel PF > 0.95 suitable for fixing in aluminium framed ceilling, 36 watt, 2'x2'size, complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type, complete all as specified and directed. Make-CG, Cat Part No LCTLRNE-36-FO-CDL/WW or equivalent in Bajaj/Philips/havells

S&F for LED building security light 25 watt, 230V with lens and toughen glass top complete PF > 0.95 with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/25 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS clamp and fastener, complete all as specified and directed. Make- CG Cat Part No LSTS--25-CDL-M or equivalent in /philips/Havells/Bajaj

S&F for exhaust fan 300mm in sweep (steel body) 230/240 volt AC complete with all acessories including making connection by using flexible wire of size 0.50 sqmm 3 core and making holes, grouting nut bolts in wall for exhaust fan, complete all as specified and directed.

S&F for geyser for hot water single phase AC 240 Volts, 50 Hz incluing connecting cable with Plug top one, complete all as specified and directed. Note:- Unserviceable geyser to be deposited to E&M store yard .

M&L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified location), connected with galvanised steel earthing lead of 25mmx4mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2 with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI lead 04mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS, complete all as specified and directed.

Supply and fix of ceiling fan of 5 star rating with hook 1200 mm (48") sweep and connecitng up complete with and including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to porcelain connector block of fan suitable on working AC, SP 230 V electric supply including electronic fan regulator stepped, flush type including all connection, complete all as specified and directed.

Supply and laying LT UG cable 2 core 10 sqmm XLPE insulated armoured 1100 Volts grade heavy duty cable with PVC insulated stranded aluminium conductor laid in trenches, complete all as specified and directed.

Supply and laying LT UG cable 4 core 16 sqmm XLPE insulated armoured 1100 Volts grade heavy duty cable with PVC insulated stranded aluminium conductor laid in trenches, complete all as specified and directed.

S&F for GI tubing light grade 40mm bore,on pole /wall with necessary clamps,nuts,bolts and washers/under road cross ISI marked, for cable protection, complete all as specified and directed.

Supply only HDPE Double wall corrugated pipe (DWC) confirming to IS-14930 (Part-II) of size 63mm including snap fit coupler as required for cable protection, complete all as specified and directed

S&F of outdoor feeder pillar box fabricated from factory of overall size 950 mm (L) x 400mm (b) x950 mm (H) made with 3 mm thick CRCA sheet with hinged door front and rear locking arragements for each cabinet, including painting with super enmaled paint of two coat over a coat of red oxide primer and black at bottom after antirust treatment of CRCA sheet top cabinet with incoming 3 phase & neutral and bus bar rating current 1.5 times with IP 65 protection. The feeder pillar shall be provided with two Nos of earth terminal hinged door, front and rear door with locking arrgagement suitable for 1100 Volts grade, 3 Phase, 415 Volts, 50 Cycles, AC suppply, LT danger notice plate front and rear, The panel shall be rest on iron angle frame size 50x50x5 mm and embedded 300 mm below ground level in PCC 1:2:4 Type B-1 using 20 mm grade stone aggregate, 500 mm above ground level complete all as directed by Engr-in- Charge with follwoings :-

S&F and laying in trenches/fixed to wall galvanised steel water tubing 50mm bore, medium grade with and including all medium grade fitting, complete all as specified and directed.

S&F and laying in trenches/fixed to wall galvanised steel water tubing 25mm bore, medium grade with and including all medium grade fitting, complete all as specified and directed.

S&F for gun metal gate valve with iron wheel head, screwed both ends for iron pipes 50mm bore, complete all as specified and directed.

S&F for gun metal gate valve with iron wheel head, screwed both ends for iron pipes 25mm bore, complete all as specified and directed.

M&L for cutting and welding of exisiting CI/GI pipe in trenches for fixing/inserting of valve, bends,double socket, Tee pieces, single branch, Y junction etc upto 100mm size of pipe complete by using necessary cutting material such as gas cutter etc. complete all as specified and directed.

S&F for stepped type (0-4 step) electronic regulator for ceiling fan 1200mm 240volts 100 watts single pole including connecting testing, complete all as specified and directed.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17(R) of tender documents.

SRI SAI CONSTRUCTION COMPANY

M/S VISHNU ENTERPRISES