Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance GRAM KANETHU BUJURG PO BARGADWA BASTI UTTAR PRADESH 272194 | BASTI | UTTAR PRADESH | 272194 | Admitted-Finance |
| 2 | Admitted-Finance B 22 NADARGANJ KANPUR ROAD AMAUSI INDUSTRIAL AREA LUCKNOW UTTAR PRADESH 226008 UDYAM UP 50 0009360 09AAPCS2984M1ZD R M | LUCKNOW | UTTAR PRADESH | 226008 | Admitted-Finance |
Tender Value
Refer Docs
Closing Date
10 Feb 2021, 5:00 pmClosed
Chief Engineer and Director WALMI Lucknow
Office of Chief Engineer and Director, Water and Land Management Institute WALMI Lucknow, Uttar Pradesh, India
Renovation / Upgradation Work of WALMI Centre Lucknow under National Hydrology Project
2021_UPIDW_545079_1
02/CE/WALMI Lucknow/NHP/UP(SW)/2020-21
Open Tender
Civil Works
180 days
Lucknow
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
Exempted
22 Mar 2021
11 Jan 2021
11 Feb 2021
11 Jan 2021
10 Feb 2021
1 Feb 2021
Renovation of Toilets
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-Charge.
S/F 10 mm thick glazed/ matt finish Vitrified tiles of size 600x600 or more approved company like RAK, JOHNSON, SOMANY or equivalent make of approved shade, colour and pattern as directed by Engineer-in-charge in floor, skirting or dado laid with 1:3 cement and coarse sand mortar with approved quality adhesive finished with white cement and pigment to match the tiles shade etc. complete including supply of all material, labour and T&P etc. required for proper completion of work
Dismantling existing plaster including disposal of refuse as directed by the Engineer- in- charge with in a distance of 60 meter (200ft.)
12 mm. Thick plaster with cement and approved coarse sand in proportion of 1:3 cement & find sand of FM not less than 1.25
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete
Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on decorative wall surface to give an even shade including thoroughly brushing to make the surface clean of all dirt grease loose pieces and prepared smooth.
S/F 8 mm thick glazed/ matt finish antiskid scratch free, joint free hard Industrial floor tiles like group 025 (SOMANY) or equivalent make of size more than 500x500 mm of approved shade, colour and pattern in floor, skirting or in dado lald with 1:3 cement and coarse sand mortar and joints finished with white cement slurry and polishing complete including supply of all material, labour and T&P etc. required for proper completion of work.
Providing & fixing white vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" of "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba , all complete as per the direction of Engineer in charge.
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fittings as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : (Single half stall urinal with 5 litre P.V.V. automatic flushing cistern)
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. Brass piller taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :(White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass piller taps)
Providing and fixing pedestal for wash basin complete recessed at the back for the reception of pipes and fittings,
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP Brass screws with concealed fittings arrangement of approved quality and colour. (600 mm long towel rail with total length of 645mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.)
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : (Rectangular shape 453x357mm)
Providing and fixing PTMT stop cock of approved quality and colour. (Concealed stop cock, 15 mm nominal bore 108 mm long, weighing not less than 108 gms)
Providing and fixing PTMT piller cock of approved quality and colour (15mm nominal bore, 125 mm long foam flow, weigh in not less than 120 gms)
Renovation of M.B Block (Suit No 11, 12, 13, 14, 15) & M.A. Block (Suit No-13) at WALMI Lucknow
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. as per direction of Engineer-in-Charge.
S/F 10 mm thick glazed/ matt finish Vitrified tiles of size 600x600 or more approved company like RAK, JOHNSON, SOMANY or equivalent make of approved shade, colour and pattern as directed by Engineer-in-charge in floor, skirting or dado laid with 1:3 cement and coarse sand mortar with approved quality adhesive finished with white cement and pigment to match the tiles shade etc. complete including supply of all material, labour and T&P etc. required for proper completion of work
Dismantling existing plaster including disposal of refuse as directed by the Engineer- in- charge with in a distance of 60 meter (200ft.)
12 mm. Thick plaster with cement and approved coarse sand in proportion of 1:3 Cement and Fine sand of FM in less than 1.25
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete
Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on decorative wall surface to give an even shade including thoroughly brushing to make the surface clean of all dirt grease loose pieces and prepared smooth.
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, slandered size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fittings as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever repaired : (Single half stall urinal with 5 litre P.V.V. automatic flushing cistern)
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. Brass piller taps, 32 mm C.P. brass waste of slandered pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :(White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass piller taps)
Providing and fixing pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP Brass screws with concealed fittings arrangement of approved quality and colour. (600 mm long towel rail with total length of 645mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.)
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : (Rectangular shape 453x357mm)
Providing and fixing PTMT stop cock of approved quality and colour. (Concealed stop cock, 15 mm nominal bore 108 mm long, weighing not less than 108 gms)
Providing and fixing PTMT piller cock of approved quality and colour (15mm nominal bore, 125 mm long foam flow, weigh in not less than 120 gms)
Renovation of Passage of Ground Floor and First Floor with stairs at WALMI Lucknow
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-Charge.
S/F 10 mm thick glazed/ matt finish Vitrified tiles of size 600x600 or more approved company like RAK, JOHNSON, SOMANY or equivalent make of approved shade, colour and pattern as directed by Engineer-in-charge in floor, skirting or dado laid with 1:3 cement and coarse sand mortar with approved quality adhesive finished with white cement and pigment to match the tiles shade etc. complete including supply of all material, labour and T&P etc. required for proper completion of work
Renovation of False Ceiling Tiles and Fixing of anodized aluminum section in Mess at WALMI, Lucknow.
Providing and fixing with 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) mineral fibre false ceiling tiles at all hights of size 595x595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity K= 0.052-0.057 w/m K, Fire performance as per (BS 476 pt-6&7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @ 120gsm) comprising of main T runners of 15x32mm of length 3000 mm cross T of size 15x32mm of length 1200mm and secondary intermediate cross of T of size 15x32 mm of length 600mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised&80gsm) 50mm long 8mm outer diameter m-6 dash fasteners, 6mm diameter fully threaded hanger rod upto 1000 mm length and l- shape level adjuster of size 85x25x2 mm, shaped at 1200 mm centre to centre along main 'T'. The system should reset on periphery walls/ partitions with the help of FI perimeter wall angle of size 24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450mm centre to centre& 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre- painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer- in- charge.
Supply and fixing of anodized aluminum door having 2mm thick aluminum Section excluding coating and an average coating of 20 micron fully glazed made of aluminum door tube size 83.5x44.65m m as vertical member and 1140x44.45mm size tube in bottom and horizontal member door chaukhat should be of aluminum tubular vertical with two open able shutter, fixtures, 4mm glass, handles locks screw necessary bending and excluding cost of floor spring if required for proper completion of the work. as per direction of Engineer in Charge.
Pratap Narayan Mishra
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid