Special repair to static water tank (SWTs), Provn of Hard standing and certain B/R work at AFS Bihta under GE (AF) Bihta.

Amount

M&L for Brick work with sub class 'B' bricks (Old Size bricks) straight or curved on plan to any radius as in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed

M&L for Brick work with sub class 'B' bricks (Old size bricks) straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed

M&L for reinforced cement concrete (Nominal mix) type B1, 1:2:4 (using 20mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

All as per serial item No 4 here-in-before but 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders etc complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for fair finished surfaces complete all as specified and as directed.

M & L for 10mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 mixed with WPC @3% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed Note:- WPC will be measured and paid separately.

Supply only integral water proofing compound

M&L for prepration of new plastered surfaces of walls and provide 2mm thick wall care putty to achieve smooth finish, applying two coats oil bound distemper over a coat of alkali resistant primer complete all as specified & as directed .

M&L for prepration of new plastered surfaces of walls and applying two coat of cement base paint of any colours and pattern (two or more colours) over a coat of alkali resistant priming complete all as specified and directed. Note :- Colour and pattern of paint will be as directed by Engr-in-Charge.

Demolition of Brick work or stone boulder masonary built in cement mortar including all quoins arches, pillars etc complete all as specified and as directed.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

M&L for mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ;ladders; railings; and similar work conforming to Fe-410-O or Fe-310-O complete all as specified and as directed

M&L for prepration of new steel or iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S & F for anodised aluminium frame work for doors, windows, ventilators with one or more rebates including jointing cleats for fixing gauge or glass etc complete all as specified and as directed

S & F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m (minimum) including necessary joining cleats, glazing clips, rubber peoprene packing, handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc complete all as specified and as directed

S&F anodised aluminium window and ventilator shutters, fixed/sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed

S&F sheet glass 5.50 mm thick ordinary quality & glazing with rubber gasket in square n.exc 0.5 Sqm in each pane complete all as specified and as directed

S&F sheet glass 5.50 mm thick ordinary quality & glazing with rubber gasket in square exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed

M&L for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in floor complete all as specified and as directed.

M/L for Machine cut kota stone slab flooring 20-25 mm thick laid over and including over 20 mm thick cement screed bed in cement mortar 1:6, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

M/L for Machine cut kota stone slab in riser of steps, skirting, dado and pillar, 20-25 mm thick laid over and including 10 mm thick cement plaster in cement mortar 1:4, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

M&L for brick work with old size fly ash brick class designation 75 (Kgf/cm straigth or curved on plan exc. 6.0m mean radius built in cement mortar 1:6 complete all as specified and as directed

Taking down cement plaster of any description from brick of stone walls and concrete surface, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M & L for 50 mm thick Cement concrete type B- 2, 1:2:4 (using 40mm graded stone aggregate) as in floor, finished even and smooth using extra cement complete all as specified and as directed

M & L for 75 mm thick Cement concrete type D- 2, 1:4:8 (using 40mm graded stone aggregate) as in sub-base, sub-floor etc complete all as specified and as directed

S & F for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc fastening and fixig complete with necessary welding conforming to Fe-410 W (GDE-E-250) Quality-A complete all as specified and as directed

M & L running welding in repairs thickness of metal to be welded nexc 6 mm complete all as specified and as directed

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any weight per sqm n.exc 4 Kg/Sqm complete all as specified and as directed

S & F hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt N exc 4kg per sqm complete all as specified and as directed

Excavating over areas, n exc 1.5 m deep and getting out in soft / loose soils complete all as specified and as directed

Removing excavated material not exc. 50m and deposited where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed

M & L for 100 mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all complete all as specified and as directed

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggragates) as in sub floor, sub base, hard standing, floors and paving etc complete all as specified and as directed

S & F rolled mild steel in plates (plain or chequered) Fe-410- W(Gde?E-250) quality B,channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed

S & F mild steel as in framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde- E-165 complete all as specified and as directed

M & L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed

M & L for forming 12 mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com?pound, Grade ‘A’ for 250 mm thk concrete slab complete all as specified and as directed

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed

M & L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified and as directed

VIJAY ENTERPRISES

M/S. P K DASGUPTA

M/S SAMRAT TRADING AGENCY

Mazumder Construction