ADDN/ ALTN AND SPECIAL REPAIR TO OTM ACCN 297 REGT AND CERTAIN REPAIRS AT 4 HORSE AND MD ACCN AT GOSWAMI ENCLAVE AT MIL STN KALUCHAK UNDER GE KALUCHAK

Amount

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed.

Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed.

Demolition of cement concrete (Re-inforced) of any description and in any position not otherwise specifically provided for, complete all as specified & directed.

M & L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing with neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified & directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed.

M & L for brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified & directed.

M & L for brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6 but except brick i.e. using serviceable bricks obtained from Srl item No. 1 here-in-before, complete all as specified & directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door ceostory windows & other Frames/chowkhats of size 50x100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threated star headed SS Screws having minimum frame density of 750Kg/Cum screw withdrawal strength of 2200N (face) & 1100N (Edge), miniumum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/Lugsor SS dash fasterners shall paid for separately).Note : For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Varriation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete all as specified & directed.

S&F Factory made double extruded WPC (Wood Polymer Composite) solid door ceostory windows & other Frames/chowkhats of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threated star headed SS Screws having minimum frame density of 750Kg/Cum screw withdrawal strength of 2200N (face) & 1100N (Edge), miniumum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/Lugsor SS dash fasterners shall paid for separately).Note : For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Varriation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete all as specified & directed.

M & Lfor PCC 1:2:4 type B-1 using 20 mm graded aggregates as in anchoring hold fast, parapets, copoing, apex plates, bed plates and the like including weathering slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid wiremesh shutter of 30mm size comprising of virgin polymer of value 58-60 (Suspention Grade), calcium carbonate and natural fibbers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed.

S&F factory made single extruded solid UV Rinted decorative type flush door shutter of size 35mm thick comprishing of virgin polymer of K valve 58-60 9suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength 50N/mm2, modulus of elasticty850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borger proof, water/mpisture proof and free retardnat. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threated star headed counter sunk SS Screws, complete all as specified & directed.

S&F powder coated aluminium sliding window (three track) consisting of two shutter of glazed and one shutter of flyproof. Note :The item shall be included as following : (a) Aluminium powder coated frame of section 100 x 44 mm x 1.5 mm with or without rebate. (b) Aluminium powder coated window shutters of section 40 x 20 mm x 1.5 mm thick (Two shutter of glass and one shutter of wiremesh) incl self locking catch & roller etc). (c) 5.5 5mm thick coloured or tinted glass glazing as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket (d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples, complete all as specified & directed.

S&F powder coated aluminium sliding window (Two track) consisting of two shutter of glazed and flyproof mesh fixed on external face of window frame. Note :The item shall be included as following : (a) Aluminium powder coated frame of section 63.5 x38.10 mm x 1.02 mm thick with or without rebate. (b) Aluminium powder coated window shutters of section 40 x 18 mm x 1.25 mm thick (Two shutter of glass and one shutter of wiremesh) incl self locking catch & roller etc). (c) 5.5 5mm thick coloured or tinted glass glazing as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket. (d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples and aluminium beads, complete all as specified & directed.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws@200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge

S&F of aluminium powder coated (minium thickness 50 micron) door shutter, rails (top, middle and style) of size 82.53x44.45mm and bottom rail of size 114.30x44.45mm made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, mortice lock having six levers, aluminium body hydraulic door closer of suitable size, handles 2 Nos in each shutter, tower bolt, hinges etc, anodised aluminum snap beading screws, complete all as specified & directed. Note PVC Panels & Sheet Glass will be measured and paid separately under respective item, complete all as specified & directed.

S&F of 5.5mm thick glass with solar control film 50micron reflective type sticed to glass panes as per instructins of manufacturersas in aluminium door with aluminium hollow beading/glazing clip (included with shutters) including rubber gasket, complete,all as specified & directed

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified & directed.

M&L for Hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws, complete as specified & directed.

S&F 18mm thick PVC Celuka board without lamination of any colour as in Kitchen cupboard shutters/shelves etc, fixed in repairs, complete all as specified & directed

S&F 18mm thick PVC celuka board with lamination, glossy finish of any colour as in Kitchen cupboard shutters/ shelves etc, fixed in repairs, complete all as specified & directed

S&F Zero crank hinge of size 150mm, heavy duty, soft closing type as in shutter of cupboards in Kitchen, complete all as specified & directed

S&F Stainless steel designer handle (heavy duty) of 100mm size, fixed to drawers or cupboard shutters, complete all as specifed & directed

S&F Stainless steel designer handle (heavy duty) of 150mm size, fixed to drawers or cupboard shutters, complete all as specifed & directed

S&FAluminium, anodised, handles 150 mm of extruded section and fixed complete as specified & directed.

S&FAluminium, anodised, handles 125 mm of extruded section and fixed complete as specified & directed.

S&F for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F for mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame, complete as specified & directed.

S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed in repair with statinless steel wire staples complete as specified & directed.

Supply and fixing in repair 25mm outer dia stainless steel decorative drapery rod ( Model No- SS-25FL of Vista) of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel rings with 50 mm dia and proportionate for part there off, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. Note :-The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings) complete as specified & directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Supply & fix CPVC (Chlorinated poly vinyl chloride) pipes, bore (inner dia) of pipe in 15 mm of pressure rating 10 kgf/cm2 fixed to walls, ceilings or in floors etc., complete all as specified and directed. Note :- The rate for pipe is included all pipe fittings such as ends, elbows, unions, tees reducing tees, adapters, sockets, plugs, house clips as well as brass threaded fittings for all opening/connections such as Bib taps/Stop valve etc.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Supply & fix CPVC (Chlorinated poly vinyl chloride) pipes, bore (inner dia) of pipe in 20 mm of pressure rating 10 kgf/cm2 fixed to walls, ceilings or in floors etc., complete all as specified and directed. Note :- The rate for pipe is included all pipe fittings such as ends, elbows, unions, tees reducing tees, adapters, sockets, plugs, house clips as well as brass threaded fittings for all opening/connections such as Bib taps/Stop valve etc.

Supplied and fixed Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including dismantling of old broken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

Supplied and fixed Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

Supply & fix CPVC (Chlorinated poly vinyl chloride) pipes, bore (inner dia) of pipe in 25 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and as directed. Note : as overflow pipe extended upto rain water pipe or 45 cm beyond external face of wall, complete all as specified and as directed.

S & F stop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified and as directed.

S & F bib tap 15 mm bore long body, Brass CP, fancy type (long shank )., with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified and as directed.

Stop valve /Angle valve (ISI Marked), fancy type, chromium plated with long shank and cup (concealed type). screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore and fixed in repair complete all as specified.

Supply & fixed overhead shower CP , 65 mm ABS shower (without arms)

Supply and fixed in repair Soap dish cantabile-clea (material SS finish, glossy) fixed to plugs with CP brass screws complete all as specified and as directed.

S & Fixed corner glass shelf with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified .

S & F in repair vitreous china wash down water closet pan (Pedestal pattern) and trap (excluding) fixing bolts,flushing cistern and flush pipe including connection to drain (or outgoing pipe) including plastic seat cover suitable for water closet pedestal pan, coloured closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices with and including brass chromium plated standard quality jet with nozzle 1500 mm long PVC pipe etc complete all as specified and directed complete all as specified and directed.

S & F in repair polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 with and including 32 mm bore PVC flush pipe of suitable length complete all as specified and directed.

M&L for sunken treatment with glass fiber reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent) complete all as following :- Base Coat : Berger HS Latex plus (or equivalent) consumption base coat : 0.3 kg/m2 Reinforcement : Glass fiber Second and Third coat : Latex sheild 2K (or equivalent) Consumption top coat : 3 kg/m2 System reqquirements : density : 2.00 kg/ltr; Compressive strength: 0.5N/mm2 Wall penetration through the RCC slab must be sealed using Berger HS Repair (or equivalent). Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus (or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto sft. All depressions, unevenness, surface honeycombng shal be repaired using Berger HS Latex plus (or equivalent) modifiled polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry. Including cleaning of RCC surface to remove dust, loose paricles, etc with compressed air or any other suitable technique depending on site conditions, grinding aby sharp edges, etc. Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'CD' on page no. 109 of tender documents as per Sch 'A' Note No 19 Page No 17).

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound tobe finished even and smooth without using extra cement complete all as specified and as directed (WPC to be measured & paid separately)

Supply only Integral water proofing compound liquid complete all as specified and as directed

S&F 20mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in as spout pipes to pour out rsidual water out from the treated area, complete all as specified and as directed

M&L for hard core, of broken bricks broken to gauge n exc 63mm for laying sub base of thickness 150mm complete all as specified and directed.

M&L Cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) in foundations, filling and mass concrete in sub base complete all as specified and as directed

M&L for 25mm thick PCC (1:2:4) type B1 with 20mm graded aggregate for laying floor tiles complete all as specified and as directed

M&L for non skid coloured Ceramic tiles 8 to 10 mm thick in light shade (square/ rectangular) polished, area of each tiles exc 0.11 sqm but not exceeding 0.18 sqm, in floors/Skirting etc. set, jointed and pointed with Berger HS tile adhesive anti slip white (or equivalent) @1.2kg/sqm thickness upto 8 to 10mm (or equivalent) and epoxy material for sealing of tile joints with Berger HS Epoxy tile grout(or equivalent) to the floor of toilets and bathroom, complete all as specified and as directed

Demolition of cement concrete in and paving (un reinforced) exc. 15 cm. thickness, below or above ground level, including removal of waste from defence land and dumping at a place as specified by civil authorities complete all as specified & directed.

Taking down cement plaster on bricks or stone wall/ decayed surfaces of concrete from roof projection or RCC Chajjas etc. including racking out joints, hacking for key, scrubbing down with water, etc including removing the waste out of defence land all as specified and as directed.

M&L for capilary rise treatment of walls as following :- Base coat: Berger HS Latex plus (or equivalent) Consumption base coat: 0.3 kg/m2 Second and Third coat: Latex sheild 2K (or equivalent) Consumption top coat: 3 kg/m2 System requirements: density: 2.00 kg/ltr Compressive strength: 0.5 N/mm2 Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'AB' on page no. 105 of tender documents as per Sch 'A' Note No 19 Page No 17). Non uploading of MOU by the bidder shall lead to rejection of bid during technical evaluation.

M&L Rendering 15 mm thick on fair faces of brick/concrete surfaces in cement plaster 1:4,to be finished even & smooth wothout using extra Cement, using water proofing compound mix as per manufacturer detail, complete all as specified and as directed. (WPC measured and paid seperately)

Supply only Integral water proofing compound liquid complete all as specified and as directed

Supplied and fixed sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.

M&L Stainless steel plate rack(Utensil Rack) of size (900mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers complete all as specified and as directed.

S & F of vitreous china, wash hand basin, flat back, white of size 550mmx450mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified & directed

S & F 32 mm dia, Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 suitable for waste pipe etc fixed complete to walls, ceilings or in floors etc complete all as specified & directed .

S&F 15mm bore dia of Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified & directed

S & F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.

S& F stainkless steel, Hat and coat hooks, solid body, 175mm to 250 m complete all as specified & directed.

Supply & fixed, PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified & directed

M&L PVC (SWR) floor trap, dia of outlet in 75 mm, plain excluding grating, but including jointing with solvent cement fixed in repair complete all as specified & directed.

Supply & fixed PVC grating square, 100 mm (Hinge pattern and with or without hole) complete all as specified & directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to wall complete all as specified & directed.

Supply & fixed , 110 mm bore PVC (SWR) bends any radius, with or without excess door complete all as specified & directed.

Supply & fixed , 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal,with excess door complete all as specified & directed.

Supply & fixed , 110 mm bore PVC (SWR) vent cowl complete all as specified & directed.

Supply & fixed in repair, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenches or in floor complete all as specified & directed.

Supply & fixed in repair, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenches or in floor complete all as specified & directed.

Supply & fixed in repair, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.

Supply & fixed , 75 mm bore PVC (SWR) bends any radius, with or without excess door complete all as specified & directed.

Supply & fixed , 75 mm PVC (SWR) junction double, (double T), with excess door, equal or unequal complete all as specified & directed.

M&L Vitrified light shade ceremic tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:4, complete all as specified & directed.

M&L Vitrified light shade ceremic tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick rendering in cement mortar 1:3, complete all as specified & directed.

M&L Non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified and directed .

M&L Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.

M&L for 20 mm thick granite black marble (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including Screed bed or bedding layer of mortar 15mm thick for laying floor in CM 1:4 finished even & rough to receive top layer, complete all as specified and directed.

M&L for 25 mm thick (average thickness) PCC1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor by maintaing required gradient/undulation, finished even and fair. Complete all as specified and directed

M&L for rendering 10 mm thick plaster in cement mortar 1: 3 on concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified & directed.

M&L for rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:6, finished even and smooth without using extra cement complete all as specified & directed.

M&L for taking down cement plaster and decayed concrete of any description, upto tripple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar 1 :3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3 , complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:2:4, type B2 (using 40mm graded agg) as in plinth protection finished even and smooth using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified and directed.

M&L for preparation of newly plastered surface of wall & applying 3mm thick Acrylic wall care putty on wall surfaces complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper, white or tinted shade , complete all as specified.

M&L for preparing newly plastered surfaces and applying two coats distemper as in ceiling etc complete all as specified and directed.

M&L for preparing of plastered surfaces of wall, old decorated surfaces and applying two coats of Distemper complete all as specified and directed.

M&L for preparing surface plastered or unplastered of old surfaces with two coats oil bound Distemper as in ceilings complete all as specified and directed.

M&L for preparing of Old painted surfaces of steel or iron surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L Machine cut Kota stone slab flooring not less than 19mm thick (size of stone shall not less than 55cmx55cm), 75mm wide white marble border alround, laid over & including 15 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified and directed.

M&L Machine cut Kota stone slab not less than 19mm thick as in riser of steps, skirting, dado and pillar laid over & including 15 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified & directed.

M&L for preparing of Old painted surfaces of wood of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for laying of cable/GI pipe/concrete pipe etc. not exc. 10 Sqm on plan and getting out in any type of soil complete all as specified and directed.

M & L for cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L Reinforced cement concrete pipes class NP3, 150mm bore laid in trenches and jointed complete with collar in cement complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

S & F in repairs water closet vitreous china squatting pan ‘Orrisa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed.

M & L for cutting chases in brick wall, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 20cm girth complete, all as specified and as directed.

M & L for Stop/Angle valves, cast copper alloy, 15mm bore (concealed type), screwed down, high pressure with capstan head, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.

S & F in repairs Aluminum Handle cast type anodized of size 100mm complete all as specifed & directed.

S & F Aluminum anodized barrel tower bolt of extruded section and fixed complete of Size 100 mm long complete all as specifed & directed.

Supply & Fixed in repairs of Brass CP Towel rail , 20mm dia, D type, 60cm long between flanges, fixed in repairs, complete all as specified & directed.

S&F in repair health faucet with all connected accessories complete all as specified & directed.

S & F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters including 3 mm thick Glass panes, Stainless steel wiremesh 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/CE-TD /31 & 32/2013 sheet 1 & 2, including one coat of red oxide zinc primer, complete all as specified and directed .

S&F, 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane , fixed in repair, complete all as specified and directed.

Dismantling cast iron or reinforced concrete drain pipes of 75/100mm bore/PVC Pipe, fixed with walls and taking out of trenches, if required all as specified and directed.

M & L for Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified and directed .

M & L for Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in skirting etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar 1:3, complete all as specified and directed .

M & L for Cement Concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.

M & L for Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:4, complete all as specified & directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching etc slightly rounded or chamferred angles and throating, complte all as specified and directed.

M & L for Rendering 15mm thick in cement mortar 1:4 on brick masonry surface finished even and fair without using, extra cement including mixing of water proofing compound as per manufacture's instructions (water proofing compound shall be measured and paid separately), complete all as specified and directed.

M & L for mild steel TMT bar 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M & L for Precast reinforced cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in manhole cover slab, complete all as specified and directed. Note : (Reinforcement shall be measured and paid separately).

M & L for Concrete bed to drain pipes for 100 mm bore, laid in trenches including packing under and haunching against the side of pipes, after they are laid and tested in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate), complete all as specified and directed.

M &L for Concrete bed to drain pipes for 150 mm bore, laid in trenches including packing under and haunching against the side of pipes, after they are laid and tested in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate), complete all as specified and directed.

M & L for RCC pipes, NP2 class 100 mm diameter bore laid in trenches and jointed complete with collars complete all as specified and directed.

M & L for cutting into existing manholes for connecting new drains, internal dia 150 mm making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching complete all as specified and directed.

M & L for RCC Septic tank, conventional ype, designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 user complete all as specified and directed.

M & L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.40 m dia x 3.00 m effective depth.

M & L for cleaning/ clearing of sewage line (including manholes) of 150mm bore of any description, underground at any depth, removing any type of blockage including desilting, descaling & dechocking of drains as well as manholes with combined high pressure water jetting cum suction (vacuum) type machine mounted on LCV/ HCV and having facilities of high pressure vacuum and provision of hydraulic application through high pressure thermo plastic fibre based water jetting hose and conical round shape nozzle pipe and flushing after cleaning including removing the same in the tank to a place outside cantonment at the place meant for the purpose by local municipality, complete all as specified & directed.

E/M Portion

Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete

Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site all as specified and as directed by the Engineer in charge.

Taking down existing unserviceable submain wiring any size and making good the disturbed surface complete all as specified and as directed.

Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface complete all as specified and as directed.

All as per item No 136 above but for one fan point controlled by one piano switch all as specified and as directed.

All as per item No 136 above but One light point controlled by two way switch complete all as specified and as directed.

All as per item no-136 above but for one bell point controled by one bell push complete all as specified and as directed.

All as per ser item No 136 hereinbefore but for one 3 pin socket outlet 5 Amp Same board complete all as specified and as directed.

All as per ser item No 136 hereinbefore but for one 3 pin socket outlet 5 Amp independent complete all as specified and directed.

All as per Item no 136 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

Supply and fix modular type switch, Two way 6 Amps , 1 module complete all as specified and directed.

Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed.

Supply and fix modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.

Supply and fix modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.

Supply and fix in repairs of Ceiling rose surface bakelite three terminals 240 volts complete all as specified and directed.

Supply and fix in repairs Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , complete all as specified and directed.

S&F LED Bulb cool white 10 Watt Elegant design direct fit for easy installation complete all as specified and directed.

Supply and fix in replacement of Bell push flush type piano 5 Amp complete all as specified and directed.

Supply and fix in replacement Bell multi music 230 volt ,AC single pole complete all as specified and directed.

Supply and fix in replacement of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed.

Supply and fix in replacement of Tube light fitting integrated type suitable for LED 10W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed.

Supply and fix in repairs factory made epoxy powder coated Distribution board VTPN 4 ways ,415 Volts with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one MCCB as incommer and SP MCBs outgoing and confirming to IS : 8623 complete all as specified and directed.

Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing and confirming to IS : 8623 complete all as specified and directed.

All as per Item No- 155Above but 8 ways complete all as specified and directed.

Supply and fix in replacement MCB SP-06 to 32 Amp,10KA, 240 volts complete all as specified complete all as specified and directed.

Supply and fix in replacement of MCB SPN 32 Amp, 240 volts 50Hz AC supply,complete all as specified and directed.

S&F in repair MCCB 415 Volt 25 KA 4 Pole 125 Amps complete all as specified and directed.

S&F single core PVC insulated unsheathed multistanded copper conductor cable 1 Sqmm , 1100 Volts ISI marked drawn through existing point wiring complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed.

M & L in repair for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testingall complete all as specified and directed.

Supply and fixing LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with suitable size and length of 1.5 sqmm copper conductor with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm , connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed.complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed.complete all as specified and directed.

M&L for cutting of suitable size of holes for 250/300 mm exhaust fan in wall and grouting of nuts and bolts in wall and making good to match with existing walls complete all as specified and directed.

Taking down electric enerty meter single phase any size or type form the existing site and refixing the same at same place after carrying out necessary repair work in building and making the surface good to match with existing surface complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ,including Anti Suicide Fan Rod of suitable size and length with the provn, If the load on fans exceeded 22 kgs, than the smart rod/pipe opens from its centre and spring in the pipe expands, complete all as specified and directed.

Dismentaling and taking down ceiling fan complete with blades etc and depositing to MES Store yard complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection pipes two Nos etc complete all as specified and directed.

Supply and fix sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole mcb complete all as specified and directed.

Supply and fixing 3 pin 15/16 Amp plug top suitable for 240V 50Hz AC supply complete all as specified and directed.

Supplying and laying of CPVC pipes of dia 50 mm bore SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete fittings like socket, union, bend, elbow, tees etc complete all as specified and directed.

Supplying and laying of CPVC pipes of dia 25 mm bore SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete fittings like socket, union, bend, elbow, tees etc complete all as specified and directed.

Supplying and laying of CPVC pipes of dia 20 mm bore SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete fittings like socket, union, bend, elbow, tees etc complete all as specified and directed.

S&F 50 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for CPVC pipe and fixed complete all as specified and directed.

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for CPVC pipe and fixed complete all as specified and directed.

Cutting existing 80/100/150 mm GI pipe and inserting GI Tee of size 100x100x50 mm for tapping including necessary earth work and making flange for connection of new 50 mm of GI pipe includingcomplete all as specified and directed.

M/S Shiv Enterprises (BID ID -3460138)

JK BUILDERS AND DEVELOPERS (BID ID -3458246)

M/S ARUN ANAND (BID ID -3460304)

GENESIS INDIA (BID ID -3460201)