PROVN OF 76 X IRON CAGES FOR PVC OH TANK OF MD ACCN B C D E BLOCK FLOOR TILING IN JCO OR MD ACCN NO 50 547 567 568 576 TO 578 641 02 NOS GLOW SIGN BOARD ADDN ALTN TO BATHROOM NEAR BLDG NO P 01 AND SPL REP WORK FOR GOVT MD ACCN NO 624 TO 627 UNDER GE

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified as directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:4 etc complete all as specified as directed.

M&L for brickwork with subclass ‘B’ old sized bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as specified as directed.

M&L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in block 20cmX20cmX20Cm in size for holding iron cages at any position and height including necessary formwork ( straight or curved)complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in surface channel and drain complete all as specified and as directed.

M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

S&FMild steel framed work such as grills,gratings,etc.with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bars, barred iron doors,ladders, framed balusters, walk ways,railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

S&Frolled mild steel plates ( plain or chequrred) 5mm thick or over in thickness forming holes if required conforming to Fe.410-W ( Gde E -250) quality A. complete all as specified and directed.

M&L for mild steel Bands,supports,or stays for rainwater, ventilating pipes, including bolts if required, hooks( stay) , heavy, for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, plain angle claets for securing purlins to wood trusses or rafters, knee piece inserts, two way or three way starps, plate washers and similar small articles quality confirming to Fe290-Gde E-165 complete all as specified & as directed.

S&F 100mm long mild steel butt hinges medium weight cold rolled fixed in steel surfaces by welding complete.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each including builders hardware complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing in same opening after resecuring, adjusting and easing complete all as specified and directed.

M&L for 1.25mm thick factory made pressed steel frames of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete including PCC 1:3:6 type C-0 as in back filling of window/door frame all as specified and directed.

M&L for 1.25mm thick factory made pressed steel frames of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete including PCC 1:3:6 type C-0 as in back filling of window/door frame all as specified and directed.

M&L for 1.25mm thick factory made pressed steel frames of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete including PCC 1:3:6 type C-0 as in back filling of window/door frame all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F soccond class hard wood small fittings such as brackets of any type latch and hinges blocks , shaped door and window stops and the like including all necessary labours, articles not exceeding 200 cucm each complete all as specified and directed.

S & F second class hard wood 35mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides or of veneered particle boards medium density, wood particle board with commercial face veereers and fitted to chowkat complete all as specified and directed.

S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 35 mm thick flush shutter, solid core construction with block board core and plywood face panel, commercial type on both side complete all as specified and directed.

S&F steel window with side hung shutters both mosquitto proof and glazed shutter including box type hinges with steel handle and steel peg stay with glazing bars and 12 mm square bar or round bar of approved design welded to steel window frame dovetailed or welded including one shop coat of red oxide primer complete all as specified & as directed .

S&F steel window with side hung shutters both mosquitto proof and glazed shutter including box type hinges with steel handle and steel peg stay dovetailed or welded to receive wire mesh including one shop coat of red oxide primer complete all as specified & as directed .

S&F steel ventilators with top hung shutters including hinges , steel peg stay complete all as specified & as directed .

S&F18/19mm thick block board interior grade grade 2 quality commercial type fixed with screw to timber frame work as in cup boards and shelves complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in fixing of hold fast or bed block complete all as specified and directed.

S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick ‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed.

M & L providing and fixing powder coated aluminium ( minimum thickness of powder coating 50 micron) work for frame with aluminium sections weighing 0.55 kg/m for partitions, door , windows, ventilators with one or more rebates including jointing cleat for fixing etc.complete all as specified and directed.

M & L providing and fixing powder coated anodised aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary jointing cleats , glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150mm long - 01 No. , aluminium hinge type B-21- 02 Nos., handle -01 No.complete all as specified and directed.

M & L providing and fixing aluminium grill with and including suitable aluminium anodised frame F/H section as required manufactured by M/S Decogrill as per design No. DG-102 or equivalent as approved 6.3mm thick complete all as specified and directed.

S&F 100 mm long cold rolled mild steel butt hinges, medium weight,and fixed to chowkhat complete all as specified & directed

S&F 75mm long cold rolled mild steel butt hinges, medium weight,and fixed to chowkhat complete all as specified & directed

S&F 150 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as directed.

S&F 150 mm long extruded anodized aluminum alloy handles, cast type, etc complete and directed.

S&F 150 mm long extruded anodized aluminum alloy handles, febricated type, etc complete and directed.

S&F 125mm size aluminium anodised hasp and staple safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & as directed.

S&F aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long etc complete all as specified and directed.

S&F in repair steel helical door spring 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as directed.

M&L for mild steel Bands,supports,or stays for rainwater, ventilating pipes, including bolts if required, hooks( stay) , heavy, for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, plain angle claets for securing purlins to wood trusses or rafters, knee piece inserts, two way or three way starps, plate washers and similar small articles quality confirming to Fe290-Gde E-165 complete all as specified & as directed.

S&F in repair 25mm dia stainless steel poeder coated tubular curtain rod including fancy type brackets with rollers, stops etc complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for40mm thick PCC 1:2:4, type B-1 (using 40mm graded stone aggregate) as in floor complete all as specified and as directed.

M&L for 50mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in filling of sunken floors complete all as specified and directed.

M&L for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with bitumastic compound etc complete all as specified and as direted.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.complete all as specified and as directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm,as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm,as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for doble charged premium quality 10mm thick Vitrified tiles area of each tile n exc 0.36sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for doble charged premium quality 10mm thick Vitrified tiles area of each tile n exc 0.36sqm as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M & L for glazed ceramic coloured tiles 300x200x 7mm thick/350X250X7mm thickX450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for Granite work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like with and including 20 mm bedding in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and directed.

M&L for Granite work 18 to 20mm thick (table rubbed and polished) in floor and including 20 mm thick screed bed in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:3) on fair faces of RCC concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc. complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick bedding layer in cement mortar (1:4) on roof top, sunken floor surfaces in single layer mixed with WPC @ 2% by weight of cement for laying floor finish etc. complete all as specified and as directed. ( Note: WPC shall be measured and paid seperately under relevent item as Supply only).

M&L applying two coats @ 1.50Kg per square metre per coat minimum of two componenets of water proofing treatment on RCC roof/wall/sunken surfaces or plastered surfaces with Nito proof 100 as priming coat and Nito proof 120 or 100 as finishing coat of Forsoc or equivalent approved make

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 2% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash on wall surface complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash surface complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coat of white wash on wall surface complete all as specified and directed.

M&L for preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces, applying two coats of cement based paint over a coat of primer complete all as specified and directed .

M&L for complete removal of existing treatment of wall surfaces, applying two coat of oil bound distemper over a coat of primer including 1 mm thick (average) wall care putty complete all as specified and directed .

M&L for preparation of newly plastered surfaces of wall applying 1mm thick wall care putty on plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.

M & L for preparation of old wood or wood based surface of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paints over complete all as specified and as directed.

M & L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L for preparation of old steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paints complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description not exceeding 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L for preparation surfaces of wood and wood based materials, steel and iron work, new or old of any description and girth not otherwise described and treated with two coats of tar or coal tar black paint complete all as specified and as directed.

M&L for preparation of new or previousely untreated small articles such as rafter feet, brackets or cantilevers not exceeding 30cm projection and blocks, lebels etc. not exceeding 0.10 sqm each and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and as directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane frosted on one side complete all as specified and as directed.

Taking up or down 15 mm bore GI tubing from trenches / wall including all fittings complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate

S&F GI tubing15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing old serviceable 15 mm bore steel tubing and connections as obtained from taking down including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.

Taking up or down 20 mm bore GI tubing from trenches / wall including all fittings complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate

S&F GI tubing 20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing old serviceable 20mm bore steel tubing and connections as obtained from taking down including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.

M/L cutting chases , pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring,etc. and making good , cutting not exceeding 10cm girth complete all as specified and directed.

Taking down eaves gutter and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc. including cleaning or refifixing or removal to store (measured overall as fixed along the centreline over fittings and accessories ) complete all as directed.

S&F in repair, 15mm dia stop valves stop cast copper alloy, fancy type, chromium plated with long shank and cup ( concealed type) complete all as specified and as directed.

S & F in repairs, sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S & F in repairs, stainless steel kitchen rack made of 0.65mm thick stainless steel sheet of size,786mmX914mmX254mm fixed to wall with screws complete all as specified and as directed.

S & F in repairs, 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.

S & F in repairs, bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S & F in repair brass chromium plated tubular towel rail 20mm dia 60cm long including fixing brackets complete all as specified and as directed .

S&F in repair 20mm dia ball brass valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified & as directed.

S & F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed

S & F in repairs, waste coupling of PTMT 40mm (half or full thread) complete ( minimum weight -60gms) all as specified and as directed.

S & F in repairs, 32mm dia low density polythelene pipe ( LDPE) of pressure rating 6 kgf/cm2complete all as specified and as directed.

S & F in repairs, 50mm dia high density polythelene pipe ( LDPE) of pressure rating 6 kgf/cm2complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tank 500 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair chromium plated soap dish of approximate size 160x160x90mm embedded in wall complete all as specified & as directed.

S&F PVC connections 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.

S&F PVC connections 15mm dia with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repair vitreous china urinal coloured half stall type with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc. complete all as specified and directed.

S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

S&F in repair PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets complete all as specified and directed.

M/L PCC 1:3:6 type C-2 ( 40mm graded aggregate) as in concrete bed to drain pipe 150 mm dia including packing under , and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F in repairs, 150mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.

S&F in repairs, 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.

S&F in repairs, 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in fixed to wall complete all as specified and as directed.

S&F in repairs, 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in fixed to wall complete all as specified and as directed.

S & F110mm bore PVC ( SWR) branch piece, single (Single Y) equal or unequal with oval access door complete all as specified and directed.

S & F 75mm bore PVC ( SWR) branch piece, single (Single Y) equal or unequal with oval access door complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends of any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed.

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F Cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-I ( 1:2:4) complete all as specified & as directed

S&Fgrating doom 125mm dia with waste hole of PTMT complete all as specified & as directed

M&L febricating and fixing of water proof aluminium composite LED panel of size 20' X1'X3' ( LxBxH) having words as directed using cast acrylic sheet 3D letter of suitable size as directed including two numbers 3D logo LED light fixture with connected accessories, electrical wiring and fixing the board with 32 X 32mm MS square pipe frame in existing structure by drilling etc. complete.

M&L febricating and fixing of water proof aluminium composite LED panel of size 25' X1'X4.5' ( LxBxH) having words as directed using cast acrylic sheet 3D letter of suitable size as directed including two numbers 3D logo LED light fixture with connected accessories, electrical wiring and fixing the board with 32X32mm MS square pipe frame in existing structure by drilling holes etc. complete.

Taking down ceiling/exhaust/wall fan including connection wires carefully, removing to store complete all as directed

Taking down old water heater ( Geyser) of any make and capacity including connection carefully and removing to store complete all as directed

Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge.

M&L for point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC rigid conduit ( concealed) with all accessories including febricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screws for mounting switches, sockets, regulators etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light or fan point controlled by one 5 Amps switch one way complete all as specified and directed.

All as per item serial No 138 here-in-before but One 3 pin socket outlet 5 amps on the same board with other switches

All as per item serial No 138 here-in-before but One socket outlet 3 pin 5 Amp on independent board.

All as per item serial No 138 here-in-before but One bell/buzzzer point controlled by one push button on the same board with other switches or independent with cables

All as per item serial No 138 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable.

S&F switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed.

S&F socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and as directed.

S&F switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and as directed.

S&F lamp holder PVC polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F bell push switch 5 Amps 230 volts complete all as specified and as directed.

S&F bell ding dong AC 230 volts complete all as specified and as directed.

S&F stepped type electronic fan regulator, two module size, flush type complete all as specified and directed.

S&F ceiling rose surface bakelite 65x50mm three terminal complete all as directed.

S&F in repair LED light fitting of approved make 1X 20 W, 220V, AC decorative batten type including LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as directed.

S&F in repair Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagonal bulk head black-lit LED10 W -IP-66 luminaire comprising of high brightness LEDs complete all as specified and as directed.

S&F in repair LED light fitting of approved make mirror type with high output diffuser 2 feet, 10 W, 220V, AC decorative type with driver, holder including LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as directed.

S&F in repairs, LED35 W building security light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and as directed .

M&L for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed.

S&F in repairs, factory made, sheet steel distribution boards, TPN, 4 Way, protection class IP-43 with min 100 Amp rating copper bus bar, provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed .

S & F in repair SPN DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as specified and as directed.

S&F in repairs, MCB TPN of capacity 40A to 63A,10 KA, type 'C' curve, 240 Volts, complete all as specified and as directed.

S&F MCBs, SPN 32 Amps, 240v 10 KA, 'C' curve complete all as specified and as directed.

S&F MCBs, SP 6 to 32 Amps, 10 KA, IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.

S&F in repair ceiling fan complete with blades, down rods, electronic regulators and accessories, 230 V 1200mm sweep, minimum air delivery 210 CFM with service value 6.00BEE, five star rating with brushless direct current motor ( BLDC)complete all as specified and directed.

S&F in repair of Exhaust fans AC single phase 230/ 240 V ,50 Hz metallic heavy body of size 300 mm sweep, 1400 RPM with louver fixing with 4 no hold fastener nut and bolt with washer and connecting with flexiable PVC insulated multistranded copper conductor cable of size 1.5 sqmm including civil work opening on wall of suitable size and 400x400x6mm thick BWR graded plywood making suitable hole for fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and writing MES No. with black synthetic enamel paint with 2cm high letter and making good surface complete all as specified and directed.

Supply, fixing in repair and testing of vertical wall mounted Storage type electric water heater of capacity 25 ltrs with BEE 5 star rated, 230 V, maximum power consumption 2 KW, Drypowder Fero Glass coating Technology for inner container with Heavy Duty seamless Incoloy 800 Glass lined heating element, and 2 Nos PVC connecting pipe of whirl technology 15 mm bore 450mm long for hot and cold water supply complete with all accesories and all as specified and directed .

M&L in repair Sub main wiring with 2 runs of 6.0 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit all together shall be measured as one unit.)

M&L in repair Sub main wiring with 2 runs of 4.0 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit all together shall be measured as one unit.)

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 including demolition of old earthing .

M/S MANOJ PAUL

SHANKAR ENTERPRISE