PROVISION OF COVERED SHED OF SIZE 20X11 METRE FOR REPAIRING, PAINTING, STORAGE OF FURNITURE AND SPECIAL REPAIR TO BLDG NO P-49 TRADEMAN SHOP AND NISSAN HUT T-26 AT BSO YARD IN THE AOR OF AGE B/R-I UNDER GE (WEST) JALANDHAR CANTT

Amount

Schedule 'A' Part-I (B/R Works)

Surface excavation n. exc. 30cm and averaging 30cm deep in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and n. exc. 1.5m deep for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes etc. and getting out in hard/dense soil complete all as specified and as directed.

Returning filling in, including, spreading, leveling and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance exc 50metre but n exc 250 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for broken stone or boulders as in hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered, rammed to a true surface etc complete all as specified and as directed.

Material and labour for cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete/sunken floor etc, complete all as specified and as directed.

Material and labour for sand filling under floors or in foundations including watering, ramming and consolidation complete all as specified and as directed. .

Demolition of brick work built in cement mortar including all quoins, arches, pillars, walls and parapet walls etc complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings not exc 15cm thick below or above ground level complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exc. 6.0m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for formwork to the edge of concrete flats of fair finished n.exc 20cm wide and side of PCC horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rounding of edges over and including screed bed or bedding layer of cement mortar 20mm thick finished in cement sand mortar 1:6 complete all as specified and as directed.

Material and labour for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed or backing layer of cement mortar 10mm thick finished in cement sand mortar 1:4 complete all as specified and as directed.

Material and labour for 100mm thick cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in floors and paving, surface finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection and path finishing, joints filled with bitumen and sand mixer 50mm thick, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 40mm thick cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in floors and paving, surface finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 80mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006, of M-35 Grade with grey cement and pigment complete all as specified and as directed.

Forming 12mm thick expansion joints 100mm deep filled with preformed bituminious filler and top 30mm primed and sealed with sealing compound Grade "A" et complete all as specified and directed

Froming Contraction joints (Dummy joints) 65mm deep x 10mm wide and filled with sealing compound grade "A" etc complete all as specifed and directed

Forming construction joints 30mm x 10mm wide filled with sealing compound grade "A" etc complete all as specified and directed

Dismantling of plain or corrougated steel sheets in roof coverings complete all as specified and as directed.

Dismantling of timber scantling 40 Sq cm and over in section in any position complete all as specified and as directed.

Supply and fixing second class hard wood wooden scantling complete all as specified and as directed.

Material and labour for framed work as in doors, gates, rolled beam, guard bar etc of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) Quality A complete all as specified and as directed.

Material and labour for MS plate, ISMC/ MS angle, Gde Fe 410W/E250 quality A, as in purlin, square cut or notched forming holes, without any attachment including drilling, fitting, riveting and or welding or connecting with bolts and nuts (including rivet or nut and bolts) providing and fitting angle cleats gusset plates etc also for wedging plumbing, truing up and fixing complete all as specified and as directed.

Material and labour for MS angle Gde Fe 410W/E250 quality A, as in roof trusses (framed), bracing, fastening and heavy bracket framing with (Beam, tee, angle, channel or flat sections) including distance pieces, cleats complete all as specified and as directed.

Supply and fixing mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if required, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 complete all as specified and as directed.

Supply and fixing steel work in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.of Fe 410 gde 250 complete all as specified and as directed.

Material and labour for mild steel high yield strength TMT bars 10mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Material and labour for mild steel high yield strength TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Material & labour for 35mm thick factory made flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed.

Material & labour for mild steel, 1.25 mm thick plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Taking down chowkhat or frames with shutter not exceeding 1.5sqm each with shutters (without taking off shutters form the frames) and removing to or from store complete all as specified and as directed.

Taking down chowkhat or frames with shutter exceeding 1.5 sqm not exceeding 4.0sqm each with shutters (without taking off shutters form the frames) and removing to or from store complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortor 1:3 depth of embeded portion of hold fast or lugs measured from the face of the jamb into the wall exceeding half brick but not exceeding one brick thick complete all as specified and as directed.

Material and labour for Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mmx25mm single rebated comprises of gauged skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two openable leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. (Four Nos for each window) including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100mm long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD-06/07. (Note: Wire gauge shall be measured and paid for separately). complete all as specified and as directed.

All as per serial item No. 1.36 but glazed skeleton shutter complete all as specified and as directed.

Supply and fixing galvanized mild steel wire cloth 0.56mm nominal dia and average width of aperture 1.18mm and fixed with tinned tacks or galvanised steel staples complete all as specified and as directed.

Supply and fixing sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised type B-21 complete all as specified and as directed.

Supply and fixing 200mm long mild steel tower bolt stove enamelled bolts, with bright bolt and fixed complete all as specified and as directed.

Supply and fixing 300 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fixing 150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

Supply & fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or fixed with ‘L’ & ‘J' hooks or cranked bolts as in circular shape required for Nissan Hut pattern complete all as specified.

Supply & fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or fixed with ‘L’ & ‘J' hooks or cranked bolts complete all as specified.

Roughening old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per Sqm to receive screed bed complete all as specified and as directed.

Taking down existing water proofing from roof slab and cleaning the roof slab including scrapping of existing loose concrete from roof top and washing with water complete all as specified and as directed.

Material and labour for 40mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in padding for leveling of surface by using water proofing compound @3% by weight of cement complete all as specified and as directed.

Material and labour for 12mm thick rendering in cement mortar 1:3 on concrete surfaces of roof slab finished even and fair without using extra cement complete all as specified and as directed.

Material and labour for priming surfaces with bituminous primer polymerised primer oil basedcomplete all as specified and as directed.

Material and labour for APP based polymeric membrance minimum weight not less than 3.5kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) and on tack coat of industrial bituminous 85/25 @1.20 kg per sqm by forced application and sealed the overlap of 10cm by flame, than finally applying on coat of industrial bituminous 85/25 @ 1.20 kg per sqm overlap joint of APP membrane than, it will be finished with a coat of aluminium paint @0.200 Kg/Sqm as per manufacturer's instructions complete all as specified and as directed.

Supply only integral water proofing compound @ 3% percent by weight of cement complete all as specified and as directed.

Taking down cement plaster of any description on brick or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on brick work/PCC block wall or concrete external surfaces finished even and fair without using extra cement complete all specified and as directed.

Material and labour for 12mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and fair without using extra cement complete all specified and as directed.

Material and labour for 5mm thick rendering in cement mortar 1:3 as in ceiling of slab, chajja, slab projection etc on fair faces of concrete surfaces complete all specified and as directed.

Material and labour for preparation of old surface of ceilling and applying a coat of white wash complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls and applying a coat of oil bound distemper complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of thin layer of cement based putty/coat of chalk whiting primer complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surfaces of wall and applying a coat of cement base paint complete all as specified and as directed.

Material and labour for preparation of new or previously untreated wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Material and labour for preparation of old steel surface of any description not otherwise described over 10cm width or girth and applying one coas of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) cast in situ as in copings, bedplates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed.

Material and labour for re-inforced cement concrete nominal mix in (1:2:4) type B-1 using 20mm graded stone aggregate as in footing, plinth beam and columns etc complete all as specified and as directed.

Material and labour for formwork to sides of concrete foundations, footings, bases of columns, plinth beams and similar works, vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.

Material and labour for MS rolled joist, channel, angle or tee sections, steel beam of Gde Fe 410W/ E250 quality A fixed independently without connecting plates etc complete all as specified and as directed.

Schedule 'A' Part-II (Internal electrification)

Taking down carefully aluminum point wiring light /fan /light socket /power with fitting such as ceiling rose, air condition socket, Pendent, regulator, light fitting, street light etc which are not required for use and removing the material from site and making good the surfaces of walls ceiling etc all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one light/call bell/fan point controlled by one, one way switch complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one three pin socket outlet 5 Amps on same board with other switches complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one three pin socket outlet 5 Amps on independent board complete all as specified and as directed.

Material and labour for concealed point wiring with 2.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 2.5 Sq.mm size in green colour, for one six pin socket outlet 15 Amps on independent board complete all as specified and as directed.

Material and labour for concealed point wiring with 4Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 4Sq.mm size in green colour, for one three pin socket outlet 15 Amps on independent board complete all as specified and as directed.

Supply and fixing switch piano flush button type, 5 Amps, AC, single pole, one way, 230 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing switch socket outlet multi purpose flush type 5 Amps, AC, 5 pin, single pole, one way, 230/250 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing switch piano flush button type, 15 Amps, AC, single pole, one way, 230 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing switch socket combination, multi purpose flush type, 15 Amps, AC, 6 pin, single pole, one way, 230/250 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing sheet metal enclosures for triple pole and earth encolsure with a three pin and earth plug with socket with one triple pole MCB complete all as specified and as directed.

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm having 3 terminals, PVC polycarbonate, isolated body complete all as specified and as directed.

Supply and fixing electronic fan regulator, step type, 5 steps, 230/250 Volts and connecting up, complete all as specified and as directed.

Taking out unserviceable main switch/DB's acomplete all as specified and as directed.

Supply and fixing sheet metal enclosures for MCB's, double door, distribution board single pole and neutral 8way, 240 Volts with 200Amps rated bus bar complete all as specified and as directed.

Supply and fixing sheet metal enclosures for MCB's, double door, distribution board triple pole and neutral 4way, 240Volts with 200Amps rated bus bar with incoming/outgoing connection through proper size of lugs complete all as specified and as directed.

Supply and fixing MCB's, single pole, 5 to 30 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing isolator, single pole and neutral, 32 to 63 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing MCCB TPN 100Amps, 415 Volts complete all as specified and as directed.

Supply and fixing lamp holder, PVC/Polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing 1200mm sweep (5star rated) ceiling fan with electronic type, AC single phase 230/240 volts with electronic type regulator and accessories complete all as specified and as directed.

Taking down sub main wiring of two single core PVC cable PVC insulated 6/4 sqmm size cable including conduit or wooden batten and removing the material from site and making good the surfaces of walls, ceiling etc all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Supply and fixing sub main wiring with two single core PVC insulated unsheathed, FRLS multistranded copper conductor cable of size 6sqmm and one single core PVC insulated unsheathed, FRLS multistranded copper conductor cable green colour of size 4 Sqmm as earth lead through and including 25mm dia PVC concealed conduit with fittings complete all as specified and as directed.

Supply and fixing in replacement LED street light fitting 25Watts retrofit with and including LED lamp pressure dia cast aluminium IP66, 20watts with 2100 lumen output with internal surge protection device of 10KV, IK7 LED (SEOUL) with voltage band of 140-280V CRI 6500K (white light) with LED rod with fixtures box type and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Supply and fixing in replacement LED batten light fitting (double side) 1X22Watts decorative ultra slim aluminium square profile LED light fixture retrofit with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI 6500K (white light) with LED rod 22Watts with fixtures box type and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate, electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5metres below normal ground level, connected and including GI earth lead wire 4mm dia connected to earth plate by means of nuts, bolts, check nuts and washers of galvanised iron or steel, GI earth wire protected by 15mm dia GI pipe 'light grade' upto 2 metre above ground level and connected to machinery earth plate surrounded by packed alternate layers of charcoal and common salt 15cm thick all around top and bottom and watering pipe 20mm bore GI light grade all as shown in electrical plate No 3 of SSR Part-I of 2009, testing on completion including providing PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick cover with RCC 1:2:4 type B-1 and 8mm dia TMT bars 100mm C/C bothway and frame including excavation earthwork and returning filling etc, complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit.

M/S Kuldip Construction Co.

M/S RAJESH CONSTRUCTION COMPANY

NATIONAL BUILDERS