GE/BAS-72/2023-24 Repair to filling, leakage, seepage, flooring, glass panes, plumbing, sanitary fitting, joinery, roof treatment and misc work in certain units at Basoli Grn under GE Basoli

Amount

M & L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 including demolition of old Brickworkor stone masonary complete all as specified and as directed by Engineer -in-Charge

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered or un plastered surface of wall and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered or un plastered surface of wall and applying one coat of colour wash complete all as specified and directed.

M & L for preparation of old decorated plastered or un plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for preparation of new plastered or un plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered or un plastered surface of walls and applying one coat of oil bound distemper with cement mortar /chalk whiting/Putty in any shade complete all as specified and directed.

M&L for Preparation of old plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed

M & L for preparation of old decoratede plastered or un plastered surface of wall and applying one coat of cement base paint and filling the gap or unequal surface with cement mortar /chalk whiting/Putty complete all as specified and directed.

M & L for preparation of old painted surfaces of wood or wood based surface of any description over 10 cm with or girth and painted with one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted surfaces of steel of any description over 10cm with or girth and painted with one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed..

M & L for preparation of steel surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red-oxide primer complete all as specified and directed..

Taking down/ dismantling of broken/loose portion of chajja, facia upto 450mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary form work/scaffolding and matching with existing surface of facia, (including two coats of Apex Paint ) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and directed.

Demolition of cement concrete (reinforced) in any description and in any position complete all as specified and directed.

75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed by Engineer-in-Charge.

75mm thick PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in sub bases of floors and pavings complete all as specified and directed.

50mm thick PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in sub bases of floors and pavings complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed .

M&L for 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

M&L Glazed ceramic tiles in vertical surface 300x6000mmx7mm/ 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L for Premium Quality Durastone / Endura heavy duty vitrified tiles of size 300 mm x 300 mm x 10mm to 12mm thick as in floors and skirting set and jointed in neat cement slurry and pointed in white cement to match the surface complete over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed .

M&L for roof treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/ primer @ 0.10 Kg/sqm over RCC roof slab/ parapet after cleaning the surfaces by removing dust, dirt etc. as per manufacturer’s instructions complete all as specified and directed. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.

M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) of uniform thickness 50mm , top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed.

M&L for 15mm thick screed in CM 1:6 in at Roof Top Surfaces for smoothening surface of laying APP Membrane complete all as specified and directed .

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Vitrified Coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors . set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Vitrified Coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in Skirting/dado . set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Granite black colour of any type 18-20mm thick machine cut as in cooking plateforms and like in cement mortar ( 1:4 ) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes. complete all as specified and directed.

Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform and other similar situations etc. complete all as specified and directed

M&L for Coloured Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade including 50 mm thick sand cushioning complete all as specified and directed

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using FE 410-W (Gde-E-250) Quality A complete all as specified and directed .

Dismantling timber scantlings unframed work, 40 sq. cm and over in section, in any position complete all as specified and directed .

Demolition of wall boards(fibre, pulp, insulation etc) or insulation board/slab/blanket complete all as specified and directed .

S&F for Hollow profile PVC Wall Lining consisting of 1mm thick PVC plain colour sheet inclusive of solvent cement and fixing at site on aluminium frame. complete all as specified and directed .

S&F18 to 20 mm thick PVC board prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work, complete all as specified and directed.

S&F Factory made single exturded WPC (Wood Polymer Composite) solid door/coesetory windows & other Frames/chaukhat size 65 x 125 mm with MS hold fast/lugs/SS dash fashteners dia and length complete as per direction of Engineer-in-charge (MS hold fast/lugs or SS dash fasteners shall be paid separately)

S&F Factory made single exturded WPC (Wood Polymer Composite) solid door/coesetory windows & other Frames/chaukhat size 65 x 105 mm with MS hold fast/lugs/SS dash fashteners dia and length complete as per direction of Engineer-in-charge (MS hold fast/lugs or SS dash fasteners shall be paid separately)

S&F Factory made single exturded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60, calcium carbonate and natuaral fibre and non toxic additives minimum compressive strength 50N/ mm2, modulas of elasticity 850 n/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water/moisture proof and fire reatardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approval design pasted with hot melt adhesive on both faces of shutter and fixing wiht stainless butt hinges of required size with necessary full body threated star headed counter sunk s.s screw shall all as per direction of engineer-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wal/Piegeon proofing etc, fixed with self tapping screws including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering and complete all as specified and directed .

S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc , complete all as specified and directed.

S & F in repair vitreous China wash down water closet pan (Pedestal pattern), white (EWC) with ‘P’ or ‘S’ trap, including connection to drain or outgoing pipe and all necessary fittings, inlet, outlet pipe connections, and plastic water closet seat cover, closed pattern with recessed bottom cover and mild steel chromium plated hinge and CP jet spray complete all as specified and directed.

S & F in repair PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, complete all as specified and as directed.

S&F in repairs One piece EWC S concealed with plastic seat cover and twin flush fitting etc complete all as specified and directed.

S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for wash hand basin / sink complete all as specified and directed.

S&F in repair Vitreous china bowl urinal Half stall type (white) minimum with grating and union for discharge pipe including CP spreader of any colour for fixing with 15mm dia pipe and Incl waste pipe.complete all as specified and directed.

S&F in repair vitreous china urinal partition white of size 310 x 700mm complete all as specified and directed.

S & F in repair Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed.

S & F in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and directed.

S & F in repair PVC connection 15 mm size, of length 600 mm, with PTMT nuts complete all as specified and directed.

S & F 15mm bore tubes, medium grade, galvanised with and including all fittings including concealing to walls, floors, or ceiling or laid in floors etc including taking down old steel GI pipe complete all as specified.

S & F 20mm bore tubes, medium grade, galvanised with and including all fittings including concealing to walls, floors, or ceiling or laid in floors etc including taking down old steel GI pipe complete all as specified.

Taking up or down old steel tubing of 15/20mm dia and cleaning the same and refixing in same or other site with new fittings complete all as specified.

S & F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F in repair 15mm dia bore Stop valve/Angle Valve, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F Bathroom Cabinet with mirror plastic strong and heavy rich look 6 selves storage organiser of size 450 x 300 mm complete all as specified and directed .

S&F Fancy type health faucet with 8mm dia 1mtr long flexible tube (back flow preventer), chromium plated of 15mm bore, complete all as specified and directed.

S & F in repair Bib taps, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for bore dia of pipe 15mm complete all as specified and directed.

S & F in repair washing machine bib cock with flange, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, complete all as specified and directed.

S & F in repair internal component part (except body) of flushing cistern PVC low level 10litres capacity, complete all as specified and directed.

S & F in repair Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, complete all as specified and directed.

S&F in repair Brass Float Ball valves, high pressure aluminium rod & high density plastic ball, screwed for iron pipe 15 mm dia (minimum weight 142 gms) complete all as specified and directed.

S&F in repair Brass Float Ball valves, high pressure aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and directed.

S&F in repair Brass Float Ball valves, high pressure aluminium rod & high density plastic ball, screwed for iron pipe 25 mm dia (minimum weight 210 gms) complete all as specified and directed.

S&F in repair Brass Ball valves, high pressure (ISI marked) with polythene float and flynut screwed for iron pipe 15 mm dia complete all as specified and directed.

S&F in repair Brass Ball valves, high pressure (ISI marked) with polythene float and flynut screwed for iron pipe 20 mm dia complete all as specified and directed.

S&F in repair, Brass chromium plated tubular towel rail, 20 mm dia 'D' type 60 cm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&Fin repair, Brass chromium plated Towel Ring fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed

S&F Stainless steel high grade material double soap dish complete all as specified and directed

S&F brass chromium plated shower rose 125mm size with swivel joints fixed in repairs including fixing to steel pipe or union complete all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with, water etc. complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) finished surface even and smooth w/o using extra cement in ceiling complete all as specified and directed.

M&L Preparation of old plastered surfaces and applying two coats of distemper oil emulsion over a coat of 3mm thick wall care putty on plastered surfaces. complete all as specified and directed.

M&L Preparation of new plastered surfaces and applying two coats of distemper oil emulsion with 3mm thick wall care putty on plastered surfaces. complete all as specified and directed.

M&L Preparation of old plastered surfaces and applying one coas of distemper oil emulsion on plastered surfaces. complete all as specified and directed

S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement all as specified and directed..

Taking down rainwater pipes/Waste Pipe (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc. complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls/floor all as specified and directed..

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls/floor all as specified and directed..

S&F PVC (SWR) Bends in any radius 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) Bends in any radius 75 mm bore with access door complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) branch piece single (double Y) equal or unequal fixed to waste pipes complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) branch piece single (double Y) equal or unequal fixed to waste pipes complete all as specified and directed.

S&F in repair PVC (SWR) Vent cowl 110 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) Vent cowl 75 mm bore complete all as specified and directed.

S&F PVC shelves fixed with and including chromium plated brass screws and plastic cleats. complete in all as specified and directed.

S&F in repair curtain rod stainless steel with fixing brackets, stop etc. complete all as specified and as directed.

S&F in repair WHB mixer, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S&F in repair wall mixer with hand shower, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S&F in repair,Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F in repair,Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but n exc 4 sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and directed.

S & F Factory made Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed.

S & F Factory made Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed.

M & L for 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed.

S&F 35mm thick IInd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) to chowkat.complete all as specified and directed .

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F in repair EWC seat cover (white) flat bottom solid with CP hoinging devices, nut and bolts and connections complete all as specified and directed.

S&F in repair brass niple minimum weight15mm-38gms) suitable for HDPE water tank complete all as specified and directed.

S&F in repair Plastic water tank cover(LID) triple threaded suitable for HDPE water tank complete all as specified and directed.

S&F 18 to 20mm thick prelaminated decorative choice, printed PVC board(weight not less than 12Kg/Sqm) duly edge bonded with 0.8mm thick PVC taping as in cupboard/Kitchen cabinet shutter complete all as specified and directed .

S&F Particle board 16mm thick medium density, flat pressed, single layer type or three layer type, BWR grade complete all as specified and directed .

S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed

S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F Continous Piano type hinges mild steel 40mm width of flaps(when open), bright finish or electrogalvanised complete all as specified and directed.

S&F Magenetic catcher for kitchen wardrobe door and like complete all as specified and directed.

S&F Mortice lock of brass 4 lever, vertical type of size 100mm complete all as specified and directed.

S & F stainless steel handles cast type anodised of size 100mm long ISI marked for kitchen wardrobe door complete all as specified and directed.

S & F 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed.

S & F 300mm long stainless steel sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of , ISI marked complete all as specified and directed.

S & F 150mm long,stainless steel, barrel tower bolts, of extruded section ISI marked complete all as specified and directed.

S & F stainless steel handles cast type anodised of size 150mm long ISI marked complete all as specified and directed.

S & F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and directed.

S & F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and directed.

M&L steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.

Supply and fixing Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing Sheet glass 3mm thick figured/pin headed and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads, exc 1.5 sqm, complete all as specified and directed.

Supply and fixing Sheet glass 3mm thick figured or pin headed and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads, exc 1.5 sqm, complete all as specified and directed.

S&F Galvanized mild steel wire cloth 0.48 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply and fix S&F For Powder coating aluminium window and ventilator shutters, side hung type without sash bars, with double side shutters wire gauged shutter (incl wire mesh) & glass glazed shutter ( incl 4mm thick Glass) aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 No), hinges type B-21 100mm long (4 Nos) suitable handle (4 No), tower bolt (4 Nos) complete all as specified and directed.

Repairing of steel window by adjusting and welding the hinges complete all as specified and directed.

S&F in repair steel handle left/right for steel window of size 150mmcomplete all as specified and directed.

S&F in repair steel stays 300mm long for steel window complete all as specified and directed.

S & F Aluminium (extruded section) body door closer hydraulically regulated designation No- 3,universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg complete all as specified and directed.

S & F partition wall with aluminium frame work partly panelled with 12mm thick prelaminated particle board both side decorative choice laminations and partly glazed with 5mm thick dark tinted glass, using standard aluminium sections 50.8X25.40X1.30 and 50.8X25.40X1.19 to wall, floor, ceiling complete all as specified and dirercted. Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.

M&L Reinforced cement concrete M-20 (Nominal mix) using 20mm graded crushed stone aggregates as in shelves complete all as specified and directed.

M&L TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm cross tee 25 x 24mm and wall angle 24x24mm, using 8 mm thick ceiling panel laminated with PVC film on front face and foil back availavel in due drop texture as per IS-2095, part-I-1996, fixid in the grid of E-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips including dismantling of board of any description complete all as specified and directed.

S & F hollow profile PVC ceiling consisting of 1mm thick plain colour PVC sheet inclusive of solvent cement and aluminium frame complete all as specified and directed.

Supply and fixing oil glass putty for glass pans complete all as specified and directed.

Om Sai Ram Builders

BALKRISHAN GUPTA AND SONS

Amrik Construction co

M/S YOGESHWAR ASSOCIATES GOVT CONTRACTOR

KHOSLA ENGINEERS BUILDERS