REPAIRS/REPLACEMENTS OF EXTERNAL ELECTRIFICATION AT MIL STN BHUSAWAL UNDER GE(SOUTH) AHMEDNAGAR.

Amount

M & L for filtration of transformer oil with the help of filtration machine including draining out low viscocity carbonised transformer oil to achive 40 KV dielectric strength including testing of transformer oil before and after filtration ,submitting of test results for any type of transformer upto 200 KVA complete all as specified and as directed.

Supply and Top up upto required level transformer oil conforming to IS, superior quality, low viscocity , dielectric strength not less than 55 KV complete all as specified and as directed. Make : Power oil/Servo oil

Disconnecting primary, secondary cable, earth connection of 11000 V Transformer of capacity 200 KVA opening the top and including repacement of top cover gasket, HT porcelain bushing with stud (suitable size of dia and length) with MS nut and bolts and washers including rubber seal replacement and clean the conservator & explosion vent complete all as specified and as directed.

S & F LT bushing with stud and corksheet washer of 200KVA transformer and provide silica gel complete all as specified and as directed.

M & L for 40mm dia GI pipe light grade laid in trenches / fixed to Pole / wall for cable protection complete all as specifide and directed.

M & L for 80mm dia GI pipe light grade laid in trenches / fixed to Pole / wall for cable protection complete all as specifide and directed.

Taking down carefully unserviceable cable of any size/capacity and making good disturbed surfaces complete all as specified and as directed.

M & L PVC UG cable XLPE insulated, PVC bedded, HT armoured,heavy duty electric cable with aluminium conductor,11000 volts (Earthed) grade,cross sectional area 70 sq mm,3 core complete all as speifide and directed.

M & L PVC UG cable XLPE insulated, LT armoured,heavy duty electric cable with aluminium conductor,1100 volts grade,cross sectional area 70 sq mm,3.5 core complete all as specifide and directed.

M&L PVC UG cable XLPE insulated, LT armoured,heavy duty electric cable with aluminium conductor,1100 volts grade,cross sectional area 50 sq mm,3.5 core complete all as specifide and directed.

M&L PVC UG cable XLPE insulated ,armoured, LT heavy duty electric cable with aluminium conductor,1100 volts grade,cross sectional area 16 sqmm 4 core cable complete all as specifide and directed.

M&L PVC UG cable XLPE insulated, LT armoured,heavy duty electric cable with aluminium conductor,1100 volts grade,cross sectional area 35 sq mm,3.5 core complete all as specifide and directed.

M&L PVC UG cable XLPE insulated, LT armoured,heavy duty electric cable with aluminium conductor,1100 volts grade,cross sectional area 25 sq mm,3.5 core complete all as specifide and directed.

M&L PVC UG cable XLPE insulated, LT heavy duty electric cable with aluminium conductor, 1100 volts grade,cross sectional area 10 sqmm 2 core cable,complete all as specifide and directed.

M&L PVC UG cable XLPE insulated,LT heavy duty electric cable with aluminium conductor, 1100 volts grade,cross sectional area 6 sqmm 2 core cable complete all as specifide and directed.

M&L PVC UG cable XLPE insulated, LT heavy duty electric cable with aluminium conductor, 1100 volts grade,cross sectional area 4 sqmm 2 core cable complete all as specifide and directed.

S & F in repair CUB-LED street light fittings , pressure die cast housing prismatic polycarbonate diffuser, LEDs with secondary optics and IP 65, 30 watt complete all as specified and as directed. Make : Bajaj Cat Part No BCLST 30W LED or or equivalent

S & F in repairs Edge-Warm white LED street light fittings , pressure die cast housing with toughened glass and individual LED lenses with secondary optics and IP 66, 45 watt complete all as specified and as directed. Make : Bajaj Cat Part No BRTFG 45W LED or equivalent

S & F in repairs LED street light fittings, pressure die cast housing with epoxy power coated dark graphite grey colour , prismatic polycarbonate cover with individual LED lenses, IP 66, 60 watt complete all as specified and as directed. Make : Bajaj Cat Part No BRTFG 60W LED V3 or equivalent

S & F in repairs edge LED street light fittings, pressure die cast housing with epoxy power coated dark graphite grey colour , toughened glass and individual LEDs with secondary optics and IP 66 protection, 75 watt complete all as specified and as directed, Make : Bajaj Cat Part No BRTFG 75 W LED or equivalent

S & F in repairs Edge LED street light fittings, pressure die cast housing with epoxy power coated sheet aluminium housing and toughened glass cover, 70 watt IP 66 protection including driver prewired, complete all as specifide and directed. Make : Bajaj Cat Part No BRTFG 70W LED

S & F in repairs LED post top dom light with LED in spherical shape polycarbonate diffuser & IP 65 protection complete all as specifide and directed.Make : Bajaj Cat Part BLPTSP 25W NW LED or equivalent

S & F CFL 1x36 watt roadways lighting fittings with luminaires 1 x 36 watt rod, epoxy back powder coated sheet aluminium housing with epoxy white powder coated CRCA sheet steel gear tray clear acrylic cover aluminium reflector and accessories complete. Make: Bajaj or equivalent

S & F in repair 1x36 watt, 4 pin PLL CFL type suitable for 1x36 watt rod light fittings complete all as specifide and directed. Make : Bajaj/Havells or equivalent

Supply and Fix LED Flood Light fittings with pressure die-cast housing and toughened glass cover 120 watt IP 66, protection including driver prewired, complete all as specified and as directed. Make : BAJAJ Cat part No BARFEG 120W LED or equivalent

S & F in repair LED driver 25 to 30 watt complete all as specified and as directed. Make : Bajaj, Cat No BRLED 25P or equivalent

S & F in repair LED driver 45 watt complete all as specified and as directed. Make : Bajaj, Cat No BGD 70 065 5Y or equivalent

S & F in repair LED driver 72-80 watt complete all as specified and as directed. Make : Bajaj, Cat No BGD 36 220 5Y or equivalent

Taking down existing street light light fitting any size, any capacity (MH/FTL/CFL/LED fittings) from pole/wall after disconnecting connection from pole and repair the same by replacing chock, holders, ignitor unserviceable wire ,CFL etc and refixing the fittings on pole/wall including connection with overhead lines/ connector and testing etc complete all as specified and as directed. (Spares required will be measured and paid separately)

S &F Ignitor 70 watt MH/SV Make:Bajaj/Philips/CG

S & F Metal halide lamp for 70 watt Make:Bajaj/Philips/CG

S & F Metal halide capacitor for 70 watt Make:Bajaj/Philips/CG

S &F Ignitor 150 watt MH/SV Make:Bajaj/Philips

S & F Metal halide 150 watt, DE MH Lamp/rod, 220-250V Make:Bajaj/Philips or equivalent

S & F Metal halide capacitor for 150 watt Make:Bajaj/Philips or equivalent

S & F Metal halide copper ballast 150 watt Make:Bajaj/Philips or equivalent

S & F Metal halide copper ballast 70 watt Make:Bajaj/Philips

S & F MD-XL Double metalized paper ( Extra low loss) capacitor bank for 3 phase 440 volts and 50 Hz system for permissible non leaner load 20 % of capacity 25 KVA complete all as specified and as directed. Make : L&T/Havells/C&S/Cromption or equivalent

Supply and fix in repair lightening arresters 11 KV expulsion type complete with all fittings, transmission class, discharge capacity 65KA all as specifide and directed.

Supply and fix in repair outdoor type heat shrinkable joint kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 Sqmm

Supply and fix in repair indoor type heat shrinkable joint kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 Sqmm

S & F inrepair overload protection relay suitable for ML-4 FASD starter , MN-5, relay range 45-75, direct mounting on MNX 45-80 and currenct cap 160 A Max complete all as specifide and as directed. Make : L & T or equivalent

S & F in repair 3 pole power contactors ML-4, IS/IEC-60947-4-1 and IEC-60947-4-1 type, 100A AC-1 and 70A-AC-3 type, 415V, 50 HZ complete all as specified and as directed, Make : L & T or equivalent

S & F 3 pole power contactors block ML-3, 40A, AC3, 415V, 50 HZ and 45Amps-AC-1 type and IS/IEC-60947-4-1 complete all as specified and as directed, Make : L & T or equivalent

S & F inrepair MCCB, 415 Volts, 35 KA breaking capacity, 4 pole, 200 Amps complete with fixed thermal magnetic setting all as specified and as directed. Make : Havells/L&T or equivalent

S & F inrepair MCCB, 415 Volts, 35 KA breaking capacity, 4 pole, 250 Amps complete with fixed thermal magnetic setting all as specified and as directed. Make : Havells/Standard/L&T/C&S

S & F inrepair MCCB, 415 Volts, 25 KA breaking capacity, 4 pole, 100 Amps complete with fixed thermal magnetic setting all as specified and as directed. Make : Havells/L&T/Standard/C&S

M & L in repair cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) as in coping of pole including necessary form work weathering, slightly rounded or chamfered angles & throating complete all as specified and as directed.

Excavation in trenches for laying of cable,for pole and stay n,exc,1.5 m wide and n,exc,1.5 m in depth and getting out in soft/loose soil complete all as specifide and directed.

Excavation in trenches for laying of cable,for pole and stay n,exc,1.5 m wide and n,exc,1.5 m in depth and getting out in Hard/dense soil complete all as specifide and directed.

Removing the excaveted material soil upto a distance n,exc 50 m and deposited where directed a level n,exc.1.5 m above the starting point complete all as specifide and directed.

Returning and refilling in of excaveted soft/loose soil including spreading levelling watering and well ramming in layers n,exc.1.5 m above starting point in soil complete all as specifide and directed.

M & L for sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified.

M& L Bricks old size well burnt sub class 'B' bricks laid width equal to length of bricks laid dry flat as mechanical protection to cable with complete all as specified and as directed.

Supply and fix in repair digital programmable Electronic timer 100, 110-240V incl timer relay for high mast light complete all specifide and directed.Make : L&T or Havells

Supply and fix in repair HRC fuse DIN type 63 A complete all as specifide and directed. Make : L&T or equivalent

Supply and fix in repair HRC fuse DIN type 125 A complete all as specifide and directed. Make : L&T or equivalent

Supply and fix in repair HRC fuse DIN type 200 A complete all as specifide and directed. Make : L&T or equivalent

S&F in replacement of pole mounted FRP junction box (size 25cmx20cm) single door type providing nut, bolt, cable glands, thimble incl copper bus bar (2 Nos) of size 25x3 mm with MCB SP 16 Amps complete all as specifide and directed. Make : National or equivalent

M & L Earthing complete with galvanised steel earth plate electrode of size 600x600x6 mm thick buried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below ground level connected to galvanized iron earth strip 32x6 mm by means of bolts, nuts, washers and check nuts made out of galvanised iron and connected to main switch/control board upto 7.5 m away from the earth electrode including excavation earth woek, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 15 mm bore, light grade, 7.5 m long as applicable and as per plate No. 3 of SSR 2009 and all as spedcified ;-

Note for item No 60 above a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode. (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover reinforced with 8 mm # @ 150 mm c/c with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore medium grade & copper lug etc. (f) 40 mm nominal bore medium grade GI protection pipe 7.5 m long for protection of eratning lead. (g) Requsite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

S & F in repairs main contactor MNX-25 complete all as specifide and directed.

S & F Auxillary contactor MNX-A2 complete all as specifide and directed.

S & F in repairs Drop out fuse set and connecting with jumper, nuts & bolts to GOD complete all as specifide and directed.