Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.3 LAccepted-AOC 63 BAJMASTA RAMBAN | RAMBAN | RAMBAN | JAMMU AND KASHMIR | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹18.4 L+₹1.1 L (6.37%)Rejected-Finance | L2 | Rejected-Finance Other Than lowest | |
| 3 | Rejected-Technical | - | Rejected-Technical NOT SUBMITTED REQUISITE ELIGIBILITY DOCUMENTS AS PER BID DOCUMENTS |
Tender Value
₹19.2 L
EMD Value
₹38,400
Closing Date
15 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (Indep)
Garrison Engineer (Indep) 873 Engineer Works Section PIN 913 873 C/O 56 APO
PROVN OF SEPTIC TANK AND SR TO DRAINAGE AND PROVN OF 02X PATIENT BATHROOM WITH ALLIED INFRA AND SR TO BLDG NO T269 T266 T 271 T 272 AT FD HOSPITAL AT DHARMUND UNDER GE (I) 873 EWS
2022_MES_563743_1
NIT-60 of 22-23
Open Tender
Civil Works
Item Rate
240 days
Bhaderwah
As per NIT
7 documents required · 7 mandatory
₹500
GE (I) 873 EWS
₹38,400
Yes
8 Feb 2023
17 Nov 2022
19 Dec 2022
17 Nov 2022
15 Dec 2022
1 Dec 2022
Amount
Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.
Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.
Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.
Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
Plain Cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in foundation of poles, etc, complete all as specified and directed.
RCC 1:2:4 type B-1 (Nominal mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
RCC 1:2:4 type B-1 (Nominal mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified.
RCC 1:2:4 type B-1 (Nominal mix) using 20mm graded crushed stone aggregate in chajjas, complete all as specified and directed.
PCC 1:3:6, nominal mix, type C-1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete, complete all as specified and as directed.
Form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete, complete all as specified & directed.
Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.
Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1 :4 in half brick wall, complete all as specified.
Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought upto courses, complete all as specified and directed. Note : Volume of PCC bond stone shall be deducted from total cumulative quantity of stone masonry.
Ditto all as per item no. 16 here-in-before but except stone
Damp proof course cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.
TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.
All as per Srl item No. 19 here-in-before but 5mm dia & over upto & including 10mm dia in stirrups, spacers and binders complete all as specified & directed.
Rolled mild steel work in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary length i.e. within 20mm of the length indicated), Fe 410-W (Gde E-250) quality A complete all as specified & directed
Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed.
Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.
0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed.
0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
4 mm thick non asbestos fiber cement plain building boards in false ceiling on and incl aluminium snap grid work 605 x 605 mm with using 36.5mm x 23.5 mm x 1.5 mm thick main tee, 23.5 x 23.5mm x 1.28 mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall including necessary supporting hanger with 3 mm dia GI wire and J bolts washer nuts for securing frame work to ceiling suspended @ 120 cm c/c both ways, complete all as specified and directed.
PVC wall panelling with PVC hollow panel 25/30cm in width and 10mm thick interlocking pattern of approved shade and design fixed to wall or ceiling complete all as specified and directed.
5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
2nd class hardwood in scantling wrought timber framed and fixed complete all as specified and directed.
Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
9mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
18mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame/aluminium work complete all as specified and directed.
Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.
Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) all as directed.
Pressed steel frames of size 125mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, PCC for filling of hollow portion, complete all as specified
30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified
2nd class Hard wood, glazed and skeleton shutters, 30mm thick, open rebated and prepared to receive glass or gauge etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, size of members of shutters as specified in clause 8.24 (b) of SSR Part-I, fitted to chowkat, complete all as specified.
Extruded aluminium alloy handle, fabricated type, anodised, 150mm long (ISI marked), complete all as specified.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, 200mm long, all as specified.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, 250mm long, all as specified.
150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.
Steel ventilators with top hung shutter including hinges, steel peg and stay and two numbers MS tower bolt of 75 mm long complete all as specified and directed.
Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire, staples all as specified and directed.
Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire, staples, fixed in repair all as specified and directed.
Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100mm long, complete all as specified.
Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm, complete all as specified.
125mm size hasp & staple, aluminium, safety type, including bolt to hinge plate and fixed with screws, complete all as specified.
Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified.
75mm Brass handles, cast type, polished bright complete all as specified.
4.8mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square exceeding 0.5 Sqm in each pane complete all as specified and directed.
3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
75mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring finished even and rough, to receive floor finishes, complete all as specified and as directed.
25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in floor, finished rough to receive tiles above, complete all as specified & directed.
Non-sked ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick bedding layer in cement mortar 1:4, complete all as specified.
Glazed ceramic tiles, coloured of size 350x250x7mm / 450x350x7mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement, laid over and including 10mm thick plastering in cement mortar 1:3, complete all as specified
Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.
Factory made (rectified) precast concrete designer chequered tiles any colour, shape and size not less then 300mm x 300mm x 25mm thickness (compressive strength not less than 250 Kg/Sqm), pointed with grey cement and pigment over and including 20mm thick CM 1:4 screed bed or bedding layercomplete all as specified and directed.
Granite (of any type) tiles 20mm thick, machine cut,in skirting/dado and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing, laid over and including 15mm screed layer in cement mortar 1:4, complete all as specified & directed.
75 mm thick plain cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection, and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed.
Rendering 15mm thick in cement mortar 1:4 on other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.
Rendering 15mm thick in cement mortar 1:6 on other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.
Bib taps 15mm bore of cast copper alloy chromium plated (ISI marked) fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.
Stop cock of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs, complete all as specified and directed.
Angle or plain stop valve of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs, complete all as specified and directed.
Pillar tap cast copper alloy with capstan head, fancy type, chromium plated (ISI marked), screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed shank and fly nuts screwed for iron pipe complete for 15mm bore pipe, fixed in repairs, complete all as specified and direct
PVC connection 15mm size with length 450mm with brass nuts, fixed in repair, complete all as specified and directed.
Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified & directed.
Brass chromium plated wall mixer for mixing hot & cold water, single hole, screwed doen for bore of pipe 15mm, fixed in repairs, complete all as specified & directed.
Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, fixed in repair, complete all as specified.
Towel rail aluminium anodised tubular, 20mm dia, D type, 60cm long between flanges, complete all as specified.
15mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.
20mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed in repair, complete all as specified.
Vitreous China wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, fixing with screws of suitable size, plastic seat cover, white closed pattern with flat bottom and cover, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, complete all as specified.
Vitreous China, wash hand basin, flat back white of size 550mmx400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, exclusive of waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets , complete all as specified.
Plastic water closet seat, white, closed pattern with flat bottom, and cover including mild steel chromium plated or aluminium hinging device, fixed in repairs complete all as specified.
PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified.
PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.
PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.
32mm bore PVC flexible wate pipe for WHB, fixed in repair complete all as specified & directed.
PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified.
110mm bore PVC (SWR) bends any radius, complete all as specified.
75mm bore PVC (SWR) bends any radius, complete all as specified.
15mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.
20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.
Soap dish vitreous china white, any size fixed to plugs with brass chromium plated screws and wooden/plastic cleats, complete all as specified.
Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc., complete all specified & directed
Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and PTMT ball valve 20mm (Minimum weight 2 1 0 g m s), high pressure with polyethelyne float and fly nuts complete all as specified and directed.
Prepration of new plastered surfaces of wall and applying two coats of oil bound distemper including one coat of alkali-resistant primimg paint complete all as specified and directed.
Preparation new plastered surfaces of walls and applying two coats of cement base paint including one coat of alkali-resistant primimg paint complete all as specified and directed.
Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified.
Prepration of old painted wooden or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified
Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.
Prepration of old decorated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified
Construction of septic tank 50 Users (Brick masonry construction), complete all as specified and as shown on drawing No CEUZ/TD/1202/03 Sheet 1/2 dt 14.10.14 and 2/2 dt 11.05.07.
Construction of soakage well 1.80m dia and 3m depth (Internal dimensions) (Brick masonry construction), complete all as specified and as shown on drawing No CEUZ/TD/1202/03 Sheet 1/2 dt 14.10.14 and 2/2 dt 11.05.07.
Plain cement concrete 1:3:6, nominal mix, type C1, using 20mm graded crushed stone aggregate as in surface channel and drains, complete all as specified.
Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed.
Concrete bed to 150mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid in cement concret 1:4:8 (Nominal mix) type D-2 using 40mm graded stone aggregate, and tested, complete all as specified & directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi tred/stopped ends etc.
Salt-glazed stoneware drain pipe, internal dia of pipe 200mm, laid in trenches and jointed and tested, complete all as specified including taking down old unservicable pipes.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified.
Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified.
Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed.
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.
Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) un-reinforced and disposal of unserviceable materials, debris and rubbish to a distance 200m or under including loading, unloading and stacking, complete all as specified & directed.
Demolition of reinforced cement concrete slab of drain / culvert of any description in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition), complete all as specified.
Dismantling wall & ceiling board (fibre, pulp, insulation etc.) or insulation boards / slabs/ blankets, any thickness, including cover fillets, complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.
Dismantling wrought iron or mild steel work of any description complete all as specified and directed.
Dismantling unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified and directed.
Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and complete all as specified and directed.
Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and complete all as specified and directed.
Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and directed.
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including concealed PVC conduit of wall thickness not less than 1.8mm and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch/one bell/buzzer point using cable of different insulation colour for colour coding including modular white cover plate with frame for mounting modular switches, sockets, fan regulator etc including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.
All as per the description of Serial Item No 121 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and directed.
All as per the description of Serial Item No 121 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and directed.
All as per the description of Serial Item No 121 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.50 Sqm with 2.50 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.
All as per the description of Serial Item No 121 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 4 Sqm with 4 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.
Modular bell push 6A 1 module, fixed in repairs, complete all as specified and directed.
Modular switch 1 way 6A, 1 module, complete all as specified and as directed.
Modular Socket, 6A, 2/3 pin combined 2 module, complete all as specified and as directed.
Modular switch 1 way 16A, 1 module, complete all as specified and directed.
Modular Socket 6A/16A, 2/3 pin combined 2 module, complete all as specified and directed.
Modular Fan Regulator 5 step, 120W - 1 module, complete all as specified and directed.
Bell buzzer,ding dong, 230V AC, complete all as specified and as directed.
Angular Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed.
LED bulb 230 volt 09 watts, in warm white colour with maximum Lumen output (650 lm) complete all as specified and directed.
LED light fitting 1x20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up cable of copper conductor size 3-core ,23/0.0076 from ceiling rose to light fitting connector complete all as specified and directed. Make :- HAVELL's Cat No LHEXARP7SN1W020 or equivalent in Crompton /Philips
LED light fitting mirror type with high output diffuser 2 feet, 10 watt, 220 V AC decorative colour in polycarbonate housing and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and directed. Make :- HAVELL's Cat No LHEXACP5IN1W010 or equivalent in Crompton /Philips
Ceiling rose surface bakelite three terminals 240 volts complete all as specified and directed.
Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar SPN 2 Way complete all as specified and directed.
Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar SPN 4 Way complete all as specified and directed.
Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar SPN 6 Way complete all as specified and directed.
MCB SPN 32Amp 10 KA 240 Volts, 'C' Series, complete all as specified and directed.
MCB SPN 40 to 63Amp 10 KA 240 Volts, 'C' Series, complete all as specified and directed.
MCB SP 5 to 32Amp 10 KA 240 Volts, 'C' Series, complete all as specified and directed.
1100 Volt grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular 16 sqmm stranded conductor, complete complete all as specified and directed.
Ceiling fan of size 1200mm sweep with fan regulator, 230 volts (single phase) including provisioning of three core flexiable copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan for connection, complete all as specified & directed.
Exhaust fan with louvers of size 300mm sweep, 900 RPM, 230 volts (single phase) complete with bolts, nuts & washers, embedded in the wall including provisioning of three core flexiable copper cord of size 23/0.0076 of required length from ceiling rose or connector to Exhaust fan for connection, complete all as specified & directed
Recess mounted Slim LED 12 Watts, 3000K, round fixture, compact aluminium die cast edge lit panel with opal diffuser and seperate electronic driver including any cutting / alteration to false ceiling as required for housing the panel complete all as specified and directed. Make : Havells Cat Part No LHEBADP5IZ1W012 or equivalent in Crompton / Wipro / Philips
Recess mounted Slim LED 15 Watts, 3000K, round fixture, compact aluminium die cast edge lit panel with opal diffuser and seperate electronic driver including any cutting / alteration to false ceiling as required for housing the panel complete all as specified and directed. Make : Havells Cat Part No LHEBADP5IZ1W015 or equivalent in Crompton / Wipro / Philips
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC casing capping 20/30mm size or as required at site including its fittings and fixtures such as ties, bends, elbows and junction boxesetc. including 1.50 Sqmm copper earth wire (green colour) FRLS Cable as earth continuity conductor connected to main earthing and common earth terminal for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and directed.
All as per the description of Serial Item No 149 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and directed.
All as per the description of Serial Item No 149 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and directed.
All as per the description of Serial Item No 02 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.50 Sqm with 2.50 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.
Switch piano, flush type, 5/6 Amps, single pole, one way complete all as specified and directed.
Socket out let 3 pin 5 Amp, piano flush type, 240 volts complete all as specified and directed.
Switch socket out let combination universal type, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts complete all as specified and directed.
Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts complete all as specified and directed.
M/S DHARAM PAUL GUPTA
Bidder Name
M S BANSI LAL CONSTRUCTION CO
M/S DHARAM PAUL GUPTA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .