S/R to Gunupur-Padmapur road from 7/147 to 7/200 Km near podsing village such as PCC toe wall and paver block shoulders during 2025-26

Earth work in excavation for road work in all kinds of soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and disposal of soil using tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with in all lifts and leads upto 1000m for reuse as per clause No.-301 of MoRT&H including cost, conveyance, of all materials with all labour and T&P,Cess required for the work etc. complete as per standard specification and direction of Engineer-in-charge.

Supplying, filling in foundation & plinth with sand of approved quality from approved quarry in 23.5cm (9") thick layers including watering and ramming with cost, conveyance royalties, EMF,DMF and aditinal charges of all the materials and labour with T&P required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge (Measurement shall be taken on finished compacted section only).

Construction of Granular sub-base by providing close graded Granular sub-base Grading vi materials as per table 400.1, spreading in uniform layers with Motor Grader on prepared surface, mixing by mix-in-place method with rotovator at OMC, and compacting with vibratory Roller to achieve the desired density complete as per clause 401 of MoRTH specification for Road and Bridge works (4th revision) including cost, conveyance royalty and EMF,DMF and aditinal charges of all material and labour with T&P required for the work etc. complete in all respect as per drawing and Tecnical Specification and as directed by the Engineer-in- Charge (measurement to be taken on finished compacted thickness under OMC compaction)

Plain Cement Concrete of proportion (1:2:4) in using 12mm size Hard Granite Chips (Crusher broken) of approved quality from approved quarry, including hosting, lowering and laying compacting concrete dewatering, watering & curing, centering and shuttering with cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P required for the work etc. complete as per standard specification direction of the Engineer-in-Charge.

PCC M-15 grade of CD & Structure work using 40 mm to 10 mm size crushed stone aggregates mixed by concrete mixer laying in layers and compacting by vibrator and all leads and lifts as per approved Drawing and Techinical specifications and as per section 1700 & 2100 of MORATh specifications for road and Bridges works ( 5th Revision) including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete as per drawing and Tecnical Specification and as directed by the Engineer-in- Charge. 2(A)In Foundation bed as levelling cource

2 (B)In Foundation with formwork

Providing Weep Holes with 100mm diameter A.C/PVC Pipe in drain wall and other structures in plain/ reinforced cement concrete as per Section. 2200 & Clause No. 2706 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (4th Revision) & including cost EMF,DMF and aditinal charges royality of all materials, labour, T&P, Cess etc complete in all respect including cost of pipe and as per direction of the Engineer-in-charge.

Metal spall backing to weep holes of abutment, deep drain with HB stone aggregates of 50 mm size including cost conveyance royalty,EMF,DMF and aditinal charges of all material cost of all labour etc as per approved drawing and technical specification and clause of 710.1.4 of IRC 78 & clause 2504.2 of MoRT&H specification for Road and Bridge work (5th Revision)

Back filing of Surplus excavated earth behind structures by manual means with Intial lead 50 m and lift of a 1.5 mtr including cost of all labour T&P,Cess required for work etc complete as directed by Engineer in Chief

Supply and fixing of 80 mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by block making machine with Proper compaction lead in required pattern etc complete all respect confirming to IRC SP- 63: 2018 cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P required for the work etc. complete as per standard specification direction of the Engineer-in-Charge.

Please Enable Macros to View BoQ information