PROVN OF MICRO PROCESSOR BASED LIFT AT (P-19 NEW BLDG) CMDC (NC) UNDER GE (UTILITIES) UDHAMPUR

Supply, install, testing & commissioning 13 Passengers Machine Room Less Lift suitable to serve G+2 floors with AC variable voltage & variable frequency (VVVF drive) drive complete with all standard accessories conforming to IS : 17900, simplex collective selective automatic & manual dual controlled operation with/without attendant, automatic centre opening doors with VVVF door drive (electric motor driven mechanism), sliding glass vandalproof doors and vandalproof textured cabin (opening size not less then 900 x 2100 mm), automatic rescue device (ARD) system with audio announcer equipped with 3 Way Intercom, complete all as specified and directed by Engr-in-charge NOTE- Contractor/OEM Rep requested to visit the site before quoting the rates Specification of lift- Elevator Type- Passenger elevator Load & Capacity- 884 kg or 13 persons Speed -1 m/s single speed motor Stops & Openings- 3 stops & 3 openings, Single entrance car Travel height- 8 m Elevator Grouping- Simplex Full Collective Control Well Dimension- 1900 mm width and 2600 mm depth Head Room height- 4200 mm Pit Height- 1600 mm Car dimensions-1350 mm wide x 1600 mm deep x 2300 mm high Door dimensions- 900 mm wide x 2100 mm internal height

Srl item No 1 Contd … Car Finishes:- Car design-SS silver brushed Car Panel Finish-SS Vandalproof Textured Car Wall Material Thickness(mm) - As per Latest IS norms Handrail-Round Bend Handrail Silver brushed stainless steel (ST4) at Rear Wall Ceiling & Lighting-Integrated roof HS80 Stainless Steel Hue spot LED light Flooring-20 mm Customer provide Granite Stone Car skirting material: Stainless steel Hairline AISI441 Car Door Finish-SS Vandalproof Textured. Standard Features:- Correction drive to next level Emergency Alarm @ Main Floor Unintended Car Movement Protection (UCMP) Overload protection function with L.W.D. (Load Weighing Device), constant indication/Buzzer Bypass load Function Auto Cut off Fan and Light Centralized Hoisting for lesser vibration and smooth travel Fireman's Emergency Service Micro movement Led Based Buttons Ascending Car Overspeed Protection(ACOP) Direction & Position Indicator In Car & Landing Overspeed Governor

Srl item No 1 Contd … Advanced Car Position Indication Automatic Brake Test function every 11hours Phase reversal functioning Manual Rescue Operation +10% to –10% Voltage Fluctuation Withstanding Capacity Door Open Button Car Emergency Light Curtain of light(IR Sensor) fix to sill Accurate Relevelling, Automatic, Closed Door Car door interlock Additional Features:- BMV M, Modulated line braking Yes Gong in Car Emergency Rescue Device with audio announcer E-link provision only Three way intercom Nudging service Parking Predefined floor - Doors closed Hue spot LED light CCTV provision KONE API service ready K1; IS17518 E120 for landing door Elec surge protection

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables(heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sq.mm. 3.5 core,complete all as specified and as directed.

Supply and installation , testing and commissioning of diesel engine driven generating set of capacity 30 KVA output at NTP with AMF control panel, 415 Volts, 50 C/S AC, 3 phase 4 wire at power factor of 0.8 lagging all as per IS- 4272/2001, DG set mounted on common base plate and directly coupled through flexible coupling of diesel engine with cushy foot mountings (anti vibration) pad in and including acoustic insulated encloser/canopy with less 75 db noise level at 01 metre distance from DG set, complete with self starting system including accssories, equipment control panel ete complete as per manufacurers recommendations and to the satisfaction of Engr in charge. (a) Alternator (bush less) shall be design for an output of 30 KVA at full load for continuos rating at 0.80 PF AC 3 phase 4 wire 415 Volts 50 C/S with 1500 RPM speed, self excited self excited self regulated, screen protected, drip proof construction with insulation class 'H' with two end shield ball/roller bearing with damper winding in each pole faces as per IS-4722 or BS 2613-1970. The armature winding to be fixed on the stator and field winding on the rotor with complete AVR connections complete all as specified and directed. (b)Diesel Engine :- Diesel Engine air cooled of suitable BHP and electric start suitable to drive above alternator independently, coupled directly through flexible coupling, multi cylinder four stroke, cold starting, 1500 RPM industrial type as per BS-649 or IS-1601 with A1 electronic governor suitable to regulate speed of DG set from No load complete with fuel tank of capacity as per manufacturer recommendations, fuiel lines, exhaust pipe duly insulated with asbestos rope and with support and silencer mufflers etc for continuous operation and standared accessories,

Srl item No 3 Contd … sump pre pre heaters etc all as specified and direcetd. (c) Control Panel : - The standared AMF panel consisting of control cubical fabricated sheet steel construction indoor type suitable for mounting accessories, multifunctional digital meter suitable for measuring energy, power factor, frequency, voltage (0-500) volts and current, including CT's of suitable ratio with inbuilt selector switch, indicator lamps LED type hours meter/RPM indicator, lub oil pressure gauge, water temperature gauge, oil temp gauge & fuel level indicator safety control for engine shut off (trip with visual indication) for low lube oil pressure, safety control for engine shut off (trip with visual indication) for high wtare temperature, safety control (trip with visual indication) for low fuel level with protection of short circuit/over load and auto shut down. (d) Elctric starter equipment :- The equipment will comprise the followngs : (i) Maintenance free sealed lead acid battery 12 V & Battery lead of adequate size and capacity (ii) Starter Motor (iii) Starter gearing (iv) Start/Stop push button. (vi) Invertor cum battery charger 500 VA capacity suitable to work on 230 Volts 50 Hz AC supply system for charging of DG Set batteries externally when DG set is in off position (vi) Alternator/Dynamo of suitable capacity to charge the batteries while DG sets running complete with cut out all as per manufacturer recommendation os required at site or directed by Engr-in-Charge (vii)Cost of Foundation of DG Set to be included in quoted rate (viii)Diesel Engine should conform to latest CPCB norms

Earthing complete with galvanised steel earth plate electrode 600mm×500mmx6mm thick buried directed in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the piate not less than 1.5m below normal ground level) connected to and including galvanised strip 32x5mm by means of bolts, nuts, check nuts and washers of galvanised iron including PCC 1:2:4 in pit, angle iron 25x25x3mm frame work with precast RCC 1:2.4 cover reinforced with 8mm dia TMT bars 150mm C/C both ways and 12 mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mesh and light grade Gi protection pipe 40mm bore upto 5m length for drawing in earth lead wire, salt, charcoal, etc. Including excavation and earth work in any type of soil, removal of surplus soil to a distance not exc. 50m complete all as shown in electrical plate No 3 of MES schedule 2009 (Pt-1) and connected to main control board all as specified or indicated including testing on completion.

Supply, installation, commisioning & testing of LT panel board outdoor type floor mounted/wall mounted as per site requirements having independent compartment for bus bar incoming feeder and each out going feeders, dust and vermin proof factory made, fabricted out of 3.15 mm thick CRCA sheet suitable for 3 Phase, 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 300 Amp rating for 3 Phase and 4 wire system duly insulated with heat shrinkable type sleeves as per colour code Comprising of following- (a) MCCB 4 Pole 100 Amps Ics =100%Icu, breaking capacity of 25 KA-01 No. (Incoming) (b) MCCB 4 Pole 63 Amps Ics =100%Icu, breaking capacity of 25 KA-03 No. (outgoing) (c) Digital Ammeter with CT ratio 200/5 Amps with selector switch-01 No. (d) Digital Voltmeter 0-500 V with selector switch-01 No (e) LED Indicator lamp with holder 3 Nos-01 Set. (f) Connector with suitable size bus bar Note-: 1) The pannel shall be front operatded with cable entry from the bottom with cable glands. The fault with standing Capacity shall be 50 KA & earth bus shall be part of the LT panel. (2) Fabrication of panel box to be done by CPRI approved manufacturer (3) Cost of earth work and construction of platform for panel, brick masonary in cement mortar 1:6 with foundation PCC 1:4:8 (type D-2) including plaster work, PCC coping 1:2.4 (20mm thick crushed stone aggregate), deemed to be included in this item rate.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.