Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹4.7 L+₹49,893 (11.9%)Rejected-AOC | L2 | Rejected-AOC L3 | |
| 3 | L3₹5.0 L+₹86,194 (20.6%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | Rejected-Technical | - | Rejected-Technical Rigistration expired |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
16 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CO
Manmad Municipal Council
PROPOSED ANUAL REPAIRING WORK ITEMS OF ALL TYPES OF BUILDINGS, ROADS AND GUTTERS OWNED BY MANMAD MUNICIPAL COUNCIL AS PER THE REQUIREMENTS, IN MANMAD AREA, TALUKA-NANDGAON, DISTRICT NASHIK
2022_DMA_856222_1
MANMAD/CIVIL/03/2022
Open Tender
Civil Works
Item Rate
365 days
Manmad Municipal Council
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,500
₹50,000
3 Jul 2023
2 Dec 2022
19 Dec 2022
2 Dec 2022
16 Dec 2022
2 Dec 2022
Amount
Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads and lifts etc
Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads and lifts etc
Removing rich mix cement concrete including stacking the spoils as directed with all leads and lifts etc complete
Removing doors and windows with frames and stacking the materials as directed with all leads and lifts etc complete
Removing W C pans including disconnecting the sanitary and water supply connections and removing and breaking flooring and bed concrete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc carefully and throwing out the refusal outside etc complete
Carting 2km Murrum Building Rubish Earth Carrage of material over distance exceeding 0.50 km including loading and unloading STATEMENT C 1 With Machine Loading
Cleaning septic tank more than 1.5 Cu.M. capacity and add for each additional Cu.M. capacity. Due to Cleaning septic tank requirement under municipal council this item is included DSR as per 2015 16 241/844
Carting 3km Manure Sludge Carrage of material over distance exceeding 0.50 km. including loading and unloading. STATEMENT - C 1 With Machine Loading Pg.No. 559
Aggregate 6 mm General Rates Building Bd-W Water supply and sanitory fittings
Desilting the Supply Well and Intake Well / Head Works and Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site and stacking spreading and including necessary guarding etc complete as directed by Engineer-in-charge. M.J.P D.S.R 2021-22 Page no. 45/13
DesludgingorDesilting mud Pump with Operator (Section–B_Labour & machinery CHARGES OF MACHINERIES) (MJP SSR 2021 22)
Excavation for roadway in earthand soil of all sortsand sandand gravel or soft murum including dressing section to the required gradeand camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (2.11)
Supplying hard murumor kankar at the road siteand including conveying and stacking complete. (2.29a)
Supplying soft murum at the road siteand including conveying and stacking complete. (2.29b)
Spreading hard murumor soft murrumor gravel or kankar for side width complete (2.30)
Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. (2.31)
Picking the road surface including sectioning etc. complete (WBM surface.) (2.32)
Picking the road surface including sectioning etc. complete (BT surface.) (2.33)
Providingand layingand spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thicknessand hand packing to proper grade and camberand applying and brooming requisite type of screeningor binding Materials to fill up the interstices of coarse aggregateand watering and compacting with Vibratory roller. to the required density. By Mechanical Means Grading I (Using Screening Type A (13.2) mm Aggregate) (3.18)
Providingand layingand spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thicknessand hand packing to proper grade and camberand applying and brooming requisite type of screeningor binding Materials to fill up the interstices of coarse aggregateand watering and compacting with vibratory roller to the required density. By Mechanical Means Grading II (Using Screening Type B (11.2 mm) Aggregate)(3.20)
Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry or Hungry B.T. surface 3 kgor10 sqm. (VG 30 bulk bitumen rates are considered to arrive at rates) (3.31)
Providing and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road surface including all materialsand preparing the existing road surfaceand spreading 40 mm. stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) and heating and spraying the bitumen of specified grade @ 2 kg or sqm and spreading 12mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. completeand including applying tack coat of specified grade of bitumen at the rate of 0.30 Kg Sqm. on existing bitumen surface. (VG 30 bulk bitumen rates are considered to arrive at rates) (3.36a)
BITUMINOUS MACADAM: Providing and laying bituminous macadam using crushed aggregate of Grading 1and premixed with bituminous binderand transported at site with VTSand laid over a previously prepared surface and finished to the required grade andleveland alignmentand and rolling to achieve the desired density for 80or100 mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC 27 2009 specified conditions and attachments such as electronic load sensor based belt conveyersand automatic synchronization of bitumen and aggregate fedderand built in dust controller system and PLC for Drum Mix plantand Sensor paverand and Vibratory roller excluding primeorTack coat etc. complete Bitumen 3.30% of specified grade (VG 30 bulk bitumen rates are considered to arrive at rates) (3.42)
Surface Dressing Providing and laying surface dressing as wearing course in single coat using crushed stone aggregates of specified size on a layer of bituminous binder laid on prepared surface and rolling with 8 10 tonne smooth wheeled steel roller. – (4.11)
Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M 40 grade of approved size and shape for City streetsand small ormedium market roadsand low volume roadsand utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materialsand manufacturingand curingand transportation of blocks to work site including loadingand unloading and stacking as directedand laying paving blocks in position over prepared bed of natural sand or crushed sand of 50 mm thickness including necessary excavation in all stratasand spreading blindge of fine sand over the prepared bedand compacting blocks by plate vibrator etc. complete. (5.20)
Providing and laying in situ cement concrete M 30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen ( excluding reinforcement) with Natural sand etc. complete
Providing and laying cement concrete pipe of IS 458:2003 NP 2 class of 450mm diameter in proper lineand level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (11.08)
Providing and laying cement concrete pipe of IS 458:2003 NP 2 class of 600mm diameter in proper lineand level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (11.09)
Providing and laying cement concrete pipe of IS 458:2003 NP 2 class of 900mm diameter in proper lineand level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (11.11)
Providing and laying cement concrete pipe of IS 458:2003 NP 2 class of 1000mm diameter in proper lineand level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (11.12)
Providing and laying cement concrete pipe of IS 458:2003 NP 2 class of 1200mm diameter in proper lineand level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (11.13)
Providing and laying cement concrete pipe of IS 458:2003 NP 3 class of 600mm diameter in proper lineand level and slope etc. complete.(11.14)
Providing and laying cement concrete pipe of IS 458:2003 NP 3 class of 900mm diameter in proper lineand level and slope etc. complete. (11.16)
Providing and laying cement concrete pipe of IS 458:2003 NP 3 class of 1200mm diameter in proper lineand level and slope etc. complete. (11.18)
Providing and laying cement concrete pipe of IS 458:2003 NP 4 class of 900mm diameter in proper lineand level and slope etc. complete. (11.19)
Providing and laying cement concrete pipe of IS 458:2003 NP 4 class of 1200mm diameter in proper lineand level and slope etc. complete. (11.21)
Excavation for foundation in soft rock including shoring and struttingand dewatering as necessary and disposing off excavated stuff as directed etc. complete. a) Upto 1.50m lift Normal Rate. b) 1.50m to 3.00m liftand Add 10%. c) 3.00m to 4.50m liftand Add 20%. d) 4.50m to 6.0m liftand Add 30% (12.08)
Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. (14.33)
Excavation for foundation in earthand soils of all typesand sandand gravel and soft murumand including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directedand dewateringand preparing the bed for the foundation and necessary back fillingand rammingand watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means (21.04)
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directedand dewateringand preparing the bed for the foundation and necessary back fillingand rammingand watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means (21.06)
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. (21.36)
Filling in plinth and floors with contractors materialorbrought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete. (21.37)
Providing dryor trapor graniteor quartziteor gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. (21.38)
Providing soling using 80 mm size trap metal in 15cm layer including filling voids with Crushed sandorgritand rammingand watering etc. complete. (21.40)
Providing and fabricating structural steel work in rolled sections like joistsand channelsand anglesand tees etc. as per detailed design and drawings or as directed including cuttingand fabricatingand hoistingand erectingand fixing in position making riveted or bolted orwelded connections without connecting platesand braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (23.01)
Providing and laying Cast in situorReady Mix cement concrete in M 10 of trapor graniteor quartziteor gneiss metal for foundation and bedding including bailing out waterand Steel centeringand formworkand laying or pumpingand compactingand roughening them if special finish is to be providedand finishing if required and curing completeand with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixerorconcrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand or Crushed sand VSI Grade finely washed etc) 24.01
Providing and laying Cast in situorReady Mix cement concrete in M20 of trapor graniteorquartziteorgneiss metal for bed blocksand foundation blocks and such other items including bailing out waterand Steel centeringand formworkand laying or pumpingand compactingand roughening them if special finish is to be providedand finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bagand plasticand tarpaulin etc. (Wooden centering will not be allowed.)and with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixeror concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand or Crushed sand VSI Grade finely washed etc) I.no 24.10
Providing and laying in situ orReady Mix cement concrete M 20 of trap or granite orquartziteor gneiss metal for R.C.C. work in foundations like raftand strip foundationsand grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out waterand Steel centering formworkand layingorpumping cover blocksand compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. completeand with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixeror concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand or Crushed sand VSI Grade finely washed etc) (25.11)
Providing and laying Cast in situorReady Mix cement concrete M 20 of trap or granite orquartziteor gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centeringand formworkand cover blocksand layingorpumpingand compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. completeand(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixeror concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand or Crushed sand VSI Grade finely washed etc) (25.31)
Providing and laying Cast in situorReady Mix cement concrete in M 25 of trapor graniteor quartziteor gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centeringand formworkand cover blocksand layingorpumpingand compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixeror concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand or Crushed sand VSI Grade finely washed etc) (25.52)
Providing and laying Cast in situorReady Mix cement concrete M 20 of trapor granite or quartziteor gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centeringand formworkand cover blocksand layingorpumpingand compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. completeand(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixeror concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand or Crushed sand VSI Grade finely washed etc) (25.70)
Providing and fixing in position TMT FE 500 bar reinforcement of various diameters for R.C.C. pile capsand footingsand foundationsand slabsand beams columnsand canopiesand staircaseand newelsand chajjasand lintels pardisand copingsand finsand arches etc. as per detailed designsand drawings and schedules. including cuttingand bendingand hooking the barsand binding with wires or tack welding and supporting as required complete. (26.33)
Providing and fixing in position after hoistingand precast 1:2 cement mortar reinforced jali 80 mm thick with 3 mm diameter mild steel bar reinforcementand of approved design on both sidesand fixing in cement mortar 1:3 and curing etc .complete. (I.No. 26.47)
Providing second class Burnt Brick masonry with conventionalor I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner wallsor in plinth external walls including bailing out water manually and striking joints on unexposed facesand raking out joints on exposed faces and watering etc. Complete. (27.01)
Providing second class Burnt Brick masonry with conventionalor I.S. type bricks in cement mortar 1:6 in superstructure including striking jointsand raking out jointsand watering and scaffolding etc. Complete (27.05)
Providing Burnt Brick on edge masonry with second class bricks of conventional type bricks in cement mortar 1:3 including mild steel longitudinal reinforcement of 2 bars of 6mm diameter or one strips of hoop iron 25 mm X 1.6 mm placed at every third courseand properly bent and bonded at endsand scaffoldingand raking out joints and watering etc .complete. (27.07)
Providing uncoursed rubble masonry of trap or granite or quartzite or gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls or in plinth of external walls including bailing out water manuallyand striking joints on un exposed faces and watering etc. complete. (28.01)
Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. (32.17)
Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen or using cement with waterproofing compound curingand formwork etc. complete. (31.01)
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick batsand curing this layer for 3 daysand applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required heightand with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500or including ponding test etc. complete. (31.04)
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfacesand in all position including scaffolding and curing etc. complete. (32.05)
Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finishand to concreteand brick surfaceand in all positions including scaffolding and curing etc. complete. (32.08)
Providing sand faced plaster externally in cement mortar using approved screened sandand in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. (32.11)
Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. (32.15)
Providing flush grooved pointing with cement mortar 1:3 for brick work including scaffolding and curing etc. complete. (32.16)
Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. (32.21)
Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plainor diamond pattern on a bed of 1:6 C.M. including cement floatand striking jointsand pointing in cement mortar 1:3 curing and cleaning etc. complete. (33.01)
Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with whiteor colour cement slurry cleaning curing etc. complete. (33.25)
Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with whiteor colour cement slurry cleaning curing etc. complete. (I.No. 33.26)
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622 2006 (Group B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement floatand filling joint with cement slurry cleaning curing etc. complete. (33.67)
Providing and laying telephone black or Amba White or Cadburybrown or Ruby red or Ocean Brown granite stone of 18 to 20 mm thick for door frameor dadoor window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessaryand curingand etc. complete. (33.68)
Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessaryand cleaning and preparing the surfaceand watering for two days etc. complete. (35.13)
Providing and applying priming coat on concreteor masonaryor Asbestos Cement plastered surfaces including scaffolding if necessaryand preparing the surface by thoroughly cleaning oiland greaseand dirt and other foreign matter and sand papering as required etc. complete. (I.No. 35.21)
Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaningand preparing the plaster surfaceand applying primer coat andscaffolding if Necessaryand and watering the surface for two days etc complete. (35.25)
Providing and applying white wash in one coat on old or new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. (36.02)
Providing and applying plastic emulsion paint of approved qualityand colour and shade to old and new surfaces in two coats including scaffoldingand preparing the surface. (excluding the primer coat)etc. complete. (36.12)
Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and boltsand lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kgorsq.m) (38.04)
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sidesand deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangementsand M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square barand suspension shaft of minimum 32 mm diameterand hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) (39.24)
Providing and fixing collapsible steel gate in one or two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum sizeand crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flangeand M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fastsand stoppersand spacesand handlesand locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). (39.26)
Providing and fixing in position. (as per I.S.1868 or 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kgorRmt. And window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kgorRmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kgorRmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kgorRmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kgorRmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kgorRmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kgorRmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etcand complete. With powder coating without box (39.40)
Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness andand size 19 x 19 mm for styles and 15 x15 mm for the top and bottom railsand M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+or0.25) thick prelaminated sheet of density 600 kgorcbm andof size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick and95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail. Topand bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+or0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+or0.25) thick PVC sheet to be fitted inside the M.S. frame weldedor sealed to the styles and rails with 5 mm (+or0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc and10 mm thickness (5 mm (+or0.25) x 2 nos ) 20 mm wide (39.47)
Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm corc and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etcand complete) frame size 60 mm x 100 mm . (39.56)
Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm corc and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etcand complete) frame size 60 mm x 125 mm (I.No. 39.57)
Providing and fixing acrylic plastic sheet panels of approved quality in required thickness plain clear or any colour or obscured linings in lieu of glass pans to doorsorwindows including providing and fixing clipsand putty etc. complete. (b) 3.00 mm thick. (I.No.39.61)
Providing and fixing mild steel grill work for windowsand ventilators etc. 20 kgorsqm as per drawing including fixturesand necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (40.01)
Providing and fixing 15mm diameter concussion push button type brassorgun metal self closing tap including necessary socket complete. (41.52)
Providing and fixing coloured glazed earthenware lipped flat backorcorner type urinal with PVC 5 liters flushing cistern with fittingsandcapacity with fittingsand inlet pipe and stop tapand brackets for fixing the cisternand P.V.C. flush pipe with fittings including lead soil pipeand lead trap and soil pipe connection up to the outside face of the wall (41.61)
Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar taporcold and hot water pillar tap bracketsand rubber plugs and brass chainand stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surfaceand testing etc. complete. (41.63)
Providing and laying concrete pipes of I.S.NP. class of 150 mm diameter in proper lineand level and slope including necessary collarsand excavationand layingand fixing with collars in cement mortar 1:1 and refilling the trench complete. (42.07)
Providing and laying concrete pipes of I.S.NP. class of 225 mm diameter in proper lineand level and slope including necessary collarsandexcavationand layingand fixing with collars in cement mortar 1:1 and refilling the trench complete. (42.08)
Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper lineand level and slope including necessary collarsand excavationand layingand fixing with collars in cement mortar 1:1 and refilling the trench complete. (42.09)
Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipesand Brick Masonryand plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.. (42.12)
Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipesand Brick Masonryand plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. (42.13)
Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick bats. (42.19)
Providingand laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bendsand teesand reducersand clampsand etc. including necessary excavationand trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (42.27)
Providingand laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bendsand teesand reducersand clampsand etc. including necessary excavationand trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (42.28)
Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot restsand cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. Complete. (42.30)
Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. (42.34)
Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inletand outlet overflow of all tanks capacity above 1000 to 20and000 litres (42.54)
Providing and fixing on wallsor ceilingor floor 15 mm dia. CPVC pipe with necessary fittingsand remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (42.55)
Providing and fixing on wallsor ceilingor floor 25 mm dia. CPVC pipe with necessary fittingsand remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (42.57)
Providing and fixing 10 cm PVC nahani trap with grating etc. complete. (42.67)
Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 kg) (42.68)
Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (140 kg) (42.69)
Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (160 kg) (42.70)
Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (100 kg) (42.71)
Providing and laying in trenches 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 4.49 kgormetre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti corrosive oil paint and 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (43.13)
Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles ( 50mm x 50mm x 6mm) at 2.5 Metresand Center to center including excavating pits for foundqtionand fixing post in cement cocnrete 1:4:8 of size 45 x 45 x 45 cm fastening the wire and painting the M.S. Angles with one coat of red lead primer and two coats of painting etc. complete. (44.09)
Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm CorC and diagonal flats as per the detailed drawing including hingesand pivot block locking arrangementand welding riveting and oil painting of three coats of approved shade Weight of gate 35 KgorSmt. (44.10)
Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. height letterand figures including painting the leftersorfigures with approved colour and shade complete (44.12)
Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mmand 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm sizeand includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. corc with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm corc with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. (46.39)
Providing and fixing 37 mm thick factory made PVC Door shutterand styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (±0.2mm) with inbuilt beading on one sideand the styles and rail smitred cut and joint at corners by inserting 2nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 29 mm x 31 mm having wall thickness 2 mm (±0.2mm) Stylesand rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (±0.2mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and railsand providing with PVC snap fit beadingand panels of 100 x 20 mm printed & laminated and inserting 2nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers completeand all as per manufacturer's specification and direction of engineer in charge. (54.13)
Royalty charges For sand
Royalty charges For All Other Minerals
KASAM ILYAS KACCHI
M/S A.G.SHAIKH
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .