CERTAIN REPAIRS TO JOINERY, FLOORING AND SANITARY FITTINGS IN SECTOR 28, 29, 30 AT CHANDIGARH UNDER GE I R AND D CHANDIGARH

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each encls all asessery complete all as specified and directed.

All as per serial item No 1.00 above but exc. 1.5 Sqm and n.exc. 4 Sqm each.

Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed.

All as per serial item No 2.00 above but exc. 1 Sqm and n.exc. 2 Sqm each.

Supply and fixing for factory made solid panel PVC moulded door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.all

Supply and fixing for factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed.

Supply and fixing for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed.

Supply and fixing for aluminium anodized handle of extruded section 75 mm long complete all as specified and directed.

All as per serial item No 6.00 above but 125mm long.

Supply and fixing for aluminium anodized door stopper 140mm long overall length complete all as specified and directed.

Supply and fixing for MS butt hinges medium weight cold rolled 100mm size complete all as specified and directed.

Supply and fixing for continuous (piano) hinges, mild steel, bright finish or electro-galvanised width of trap when open 40mm thick all as specified and directed

Aluminium alloy, anodised, sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed

Mild steel sliding door bolts, plate type 250mm long stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed

Supply and fixing for factyory made ERW section window Box type (`P' Section) with hinges, steel handl peg stay, complete with glazing bars, dovetailed or welded (to receive glazed or gauged) all as specified and directed

All as per serial item No 12.00 above but but w/o glazing bars

Demolition of brick work built in cement mortar all as specified and directed

Material and labour for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6

All as per serial item No 14.00 above but but except bricks.

Cleaning of bricks/cement mortar from bricks built in cement mortar stacking for measuring including all handling etc as directed by Engr-in-Charge.

Supply and fixing for steel ventilators with top hung shutters incl Hinges steel peg stay complete all as specified and directed

Supply and fixing for105X60mm pressed steel frames for doors with single rebate including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.

Supply and fixing for 125 x 60 mm pressed steel door frames with one or more rebates, including necessary fittings hinges with steel all as specified and directed

Material and labour for PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel chowkats complete all as specified and directed.

Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made glazed and skelton shutters, open rebated and prepared to receive glass etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members all as specified and directed.

Supply and fixing 35mm thick 2nd class hardwood (Hollock) factory made framed, panelled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I). The timber shall be kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing 35 mm thick flush shutters, solid care construction, with block board care and plywood face panels, commercial type on both sides all as specified and directed

Dismantling of board of any description all as specified and directed

Supply and fixing 19mm thick prelaminated particle boards (both side laminated) of interior grade type II of approved shade fitted in cup board shutters complete all as specified and directed.

Material and labour for french polishing on new wooden surfaces of any description, width or girth including cleaning & preparing the surfaces with a coat of wood filler on with 2 or more coats all as specified and directed.

Supply and fixing for 100mm size of aluminium hasp & staple including bolt to hinge plate & fixed with screws, all as specified and directed

Material and labour for two coats of synthetic enamel painting over a coat of pink primer including preparation of previously untreated surfaces of wood or wood based material exc. 10 cm width or girth complete all as specified and directed.

All as per serial item no 27.00 above but steel surface over a coat of red oxide zinc chrome primer.

Supply and fixing for 2nd class hard wood plain fillets sectional area exc. 13 sqcm and n.exc. 25 Sqcm clean sawn, secured with nails or brads all as specified and directed

Supply and fixing for MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair all as specified and directed.

Supply and fixing for MS barrel tower bolt stove enameled black with bright bolt 150mm long complete all as specified and directed.

Supply and fixing for mild steel pressed handle stove enamelled black 150mm complete all as specified and directed.

Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Material and labour for veneered decorative 6mm thick ply wood grade-I (with BWR resin) with one side decorative face fixed with screw all as specified and directed

Supply and fixing for mild steel work as in doors or gates of angle or other section of grade Fe-410-W with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting) fasteing and fixing complete fixed in repair all as specified and directed.

Supply and fixing for SS fancy type curtain rods fixed in repairs incl brackets & Finial all as specified and directed

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed

Supply and fixing for 2mm thick fibre glass reinforced translucent plain sheeting with two corrugation, side tap fixed with L-type or J-type hook bolts all as specified and directed

Supply and fixing for 0.5mm thick Hi-rib trapezoidal pre-painted galvalume sheet (1060mm) sheet of 550 mpa strength with 30mm crest height and 200mm pitch distance with guard film, side lap and end lap and fixing with nut bolt as per manufacturers instruction, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame complete all as specified and directed

Supply and fixing for 4.0mm thick ordinay sheet glass in squares n.exc. 0.5 Sqm each pane with oil putty all as specified and directed

Supply and fixing for figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm each of thickness 3.0mm. all as specified and directed

Material and labour for anodised aluminium standard section of size 44.45X101.60X2.0mm thick for door/window frame including jointing aluminium cleats of suitable size and lugs, etc complete all as specified and directed

Material and labour for anodised aluminium door shutters single/double leaf, side hung type, with top rail of size 44.45X101.60X1.60mm thick, bottom & lock rail 44.45X101.60X1.60mm thick styles/meeting styles shall be of size 85X44.45X1.60mm thick including jointing cleats, rubber beading snap fit clips, aluminium screws etc, panels fitted with prelaminated particle board/glass including builders hardware ie aluminium tower bolt 150mm long 2 nos to each shutter , aluminium door handle 150mm long 2 nos to ach shutter complete all as specified.(Prelaminated board and glass to be measured & paid separately). all as specified and directed

Supply and fixing for aluminium anodised window.ventilator shutters, side hung type without sash bars, aluminium secton of size 83.85mm x 44.45mmx1.6mm thick including necessary jointing cleats glazing clips, rubber packing aluminium anodised snap beading, screw, aluminium beadings such as peg stay 150mm long-01 No, Aluminium handle size 100mm -01 No hinges type B-21, 100mm long (2 Nos) on each shutter to be fitted with glass panes etc complete all as specified and directed. (Note :- Glass panes to be measured & paid separately.

Supply and fixing for plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/windows/partitions fixed with aluminium glazing clips & rubber beading complete all as specified and directed

Supply and fixing for 12mm thick prelaminated particle board (both sides laminated) of interior grade, type-II of approved brand with lamination of approved shades complete fitted in door panels, partitions etc all as specified and directed

Taking down aluminium door shutters of size exc. 1.00 Sqm but n.exc. 2.00 Sqm, dismantling the door and replacing the MS anchor rods 10mm dia, both sides screwed and tightening inside frame, both side bottled & reassembled the door, fittings all items glass beading, hinges replacing laminated board, glass etc rubber/aluminium beading where defective and fitted in position complete all as specified and directed (laminated/particle board, rubber/aluminum beading measured separatly)

Supply and fixing for double action floor spring for aluminium door shutters fixed in repairs all as specified and directed.

Supply and fixing for repairs hydraulic door closer of aluminium fixed to door shutters of designation 2 all as specified and directed

Supply and fixing for repairs 100mm size mortice locks of aluminium body, 4 levers suitable to aluminium door shutters all as specified and directed

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness all as specified and directed

Dismantling floor/hearth or wall tile including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

Material and labour for non - skid Ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed 15mm tk in cement motar 1:6. all as specifed and directed

Material and labour for non - skid Ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm tk in cement motar 1:4 all as specifed and directed

Material and labour for glazed ceramic tiles (coloured) 300X450X7-8mm thick on vertical surfaces set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over 10mm thick rendering CM 1:4 all as specified and directed.

Taking down of cement plaster of including racking joints, scrubbing down with water and hacking for key on walls.

Material and labour for providing 10mm thick plaster in CM 1:4 to brick or concrete surface trawelled to even & smooth finish without finish without using extra cement . all as specified and directed

Material and labour for 15mm thick rendering in cement mortar 1:6 finished even and fair without using extra cement complete all as specified and directed.

Material and labour for two coats of cement base paint on walls incl preparation of new plastered surfaces. all as specified and directed

Material and labour for prepration of new wall surface and apply two coats of Oil Bound Distemper all as specifed and directed

Material and labour for preparation of new plastered surfaces of walls by applying one coat of primer using necessary filling compound of white cement wall putty 2mm minimum, to obtain smooth regular/even finish, using sand paper etc and applying two coats of smooth exterior acrylic emulsion paint as approved by GE, complete all as specified and directed.

Supply and fixing for repairs venition blinds , sheer demount blinds with aluminium roller tuber, cassette colour white fabric weight 140gms, light control 70% fabric composition 100 % polyester complete alll as specified and as directed. Make :- Vista or equivalent as approved by GE.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed

Supply and fixing for Solid PVC Wall Lining consisting of 5mm thick Wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications all as specified and directed

Machine cut kota stone slab flooring 20-25mm laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed 15mm thick in CM 1:4 all as specified and directed.

Kota stone slab 15-20mm thick in risers of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment incl screed bed 15mm thick in CM 1:4 all as specified and directed.

All as per serial item no 66.00 above but on tread on steps.

Material and labour for two coats of OBD on old plastered /unplastered surface walls, white or tinted incl preparation of old surface all as specified and directed

Material and labour for two coats of white wash on old surface of walls incl preparation of old surface as specified and directed .

Material and labour for two coat of white wash on old surface of ceiling incl preparation of old surface all as specified and directed

Supply and fixing for repair vitreous china wash down water closet pan (Padestal pattern) white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed.

Supply and fixing for Viterous china wash basin,white ,flat back size 550x400mm ,including fixing acessories like galvanised brackets and rag bolts complete fixed all as specified and directed.

Supply and fixing for chromium plated shower roses with or without swivel joints any size including fixing to steel pipe all as specified and directed.

Supply and fixing for 10 ltr PVC valveless ,syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets all as specified and directed.

Supply and fixing in repair steel almirah lock with double locking security system with full length lock of heavy nickle plated with full accessories completed all as specified and directed by Engr-in-charge.

Maint and repair of existing almirah lock of any type upto serviceable condition all as specified and directed by Engr-in-charge.

GOODWILL ENGINEERS

Dhillon Construction Company

jaswant singh

M/s Matloob Ahmed

ALPHA ENGINEERS AND BUILDERS

OJHA ENTERPRISES