Construction of proposed Transit House for Court Building at Paralakhemundi in the District of Gajapati

Providing Jungle cutting uprooting bushes below 1.00m girth with cost of all labour T & P etc complete as per specification and as directed by the Engineer-In-Charge.

Earthwork in excavation in all types of soil (Hard soi,ordinary soil,stony earth) for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.

Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge.

Supplying of filling sand in foundation and plinth over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of Engineer-In-Charge.

Supplying all materials, labour, T&P and cleaning of debries,uprooging and disposing at a safe distance all complete as per direction of the Engineer in charge

Cement concrete of prop.(1:3:6) in foundation and floors up to lowest bed level using hard black granite crusher broken metal of size 40 mm size down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge.

Cement concrete of prop.(1:3:6) in foundation and floors up to lowest bed level using hard black granite crusher broken metal of size 12 mm size down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge.

Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. Ground Floor

Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. Ground Floor

First Floor

Second Floor

Terrace Floor

Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. Ground Floor

First Floor

Second Floor

R.C.C.work of Grade M-25 having a minimum compressive strength in work test of 250kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 & IS 516 using 20mm down graded size black crusher broken hard granite stone chips of approved quality & from approved quarry including hoisting, lowering & laying concrete & compacting by using vibrators, watering & curing for 4 (four) weeks centring, shuttering & finishing the exposed surface smooth providing grooves or beads where necessary including cost & conveyance royalties & taxes of all materials & labour required for the work etc., complete in all respect but excluding cost & conveyance of M.S.Rods or tor steel and binding wires of 18 to 20 gauge & labour charges for straightening, cutting, bending etc.,of the HYSD Rods or tor steel & binding wires & laying the grills placing in proper position as per direction of Engineer-in-Charge. Ground Floor Footing

Column up to Pl Lvl

Plinth Beam

Column up to Roof Lvl

Lintle

Chajja

Roof Beam

Roof Slab

Stair Case

First Floor Column up to Roof Lvl

Lintle

Chajja

Roof Beam

Roof Slab

Stair Case

Second Floor Column up to Roof Lvl

Lintle

Chajja

Roof Beam

Roof Slab

Stair Case

Terrace Floor Column up to Roof Lvl

Lintle

Chajja

Roof Beam

Roof Slab

Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) steel of approved manufacturer as per section 1600 &section 1900 of MORT&H specification for Road and Bridge works including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment) Ground Floor

First Floor

Second Floor

Terrace Floor

12mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour with T& P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. Ground Floor

First Floor

Second Floor

Terrace Floor

16mm thick cement plaster (1:6) finished smooth to inside 9''/10'' thick brick walls after raking out the joint including watering, curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. Ground Floor

First Floor

Second Floor

Terrace Floor

06 mm thick cement plaster (1:4) finished smooth to inside 9''/10'' thick brick walls after raking out the joint including watering, curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. Ground Floor

First Floor

Second Floor

Terrace Floor

Providing and fixing 20mm thick mirror polished granite stone slab, machine cut stone (sample of granite should be approved by EIC) for kitchen platforms, vanity counters, facias and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge, making gas pipe hole etc. laid over 25mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. In all floors and all heights. etc. required for the work all complete as per direction of the Engineer-in-charge Ground floor

First Floor

Second Floor

Providing and fixing 20mm thick mirror polished granite stone Skriting, machine cut stone (sample of granite should be approved by EIC) for kitchen platforms, vanity counters, facias and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge, making gas pipe hole etc. laid over 25mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. In all floors and all heights. etc. required for the work all complete as per direction of the Engineer-in-charge Ground floor

First Floor

Second Floor

Supplying, fitting & fixing of 8-10 mm thick & size of 600x600 mm Vetrified floor tile colour of matt finish with veilcraft (VC/FT ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge Ground floor

First Floor

Second Floor

Supplying, fitting & fixing of 8-10 mm thick and size of 600x600 mm vertified wall tile of in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. Ground floor

First Floor

Second Floor

Providing, fixing &fitting of 80mm thick cement concrete interlocking paver block of M-30 grade and approved make,variety,colour & size made by block making machine with strong vibratory compaction of approved design and shape,laid in required colour and pattern over 50mm thick compacted bed of coarese sand, filling the joints with fine sand etc.including cost, conveyance, royality of all matrials, labour T&P etc.complete in all respect as per direction of the engineer-in-charge Ground Floor

Providing and fixing of factory made 100% solid WPC door frames with rebate cuts and finished cross section size 125mm x 65mm single rebated make made from wood polymer composite material comprising to virgin PVC polymer of K value 57-60 (Suspension grade), including cost of all materials, cost of all labour conveyance, taxes, loading, unloading scaffolding, slaging watering and curing, T&P, etc, complete as per the direction of the Engineer-in-charge. Ground Floor

First Floor

Second Floor

Terrace Floor

Providing and fixing 32mm thick flush door shutters confirming to IS2002 decorative type core of block board construction with frame of ist class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters inclusive of 4 nos of stainless steel butt hinges, 40 mm stainless steel screws, cylindrical lock tower bolt, PVC door etc required for the work all complete as per direction of the Engineer-in-charge. Ground Floor

First Floor

Second Floor

Terrace Floor

Supply and installig UPVC - 3 tracks sliding windows and 2 sashes (shutter) with SS mesh sash dimension of 58mm x 32mmnand sash dimension of 61mm x 37mm for windows with corners fusions welded, fully reinforced with galvanised steel of 1.2mm to 2mm. The sash will be fitted with 5mm reflective toughened glass of make - saint gobain/ AIS/ Goldplus. The windows must be installed complete with all kinds of ironmonergy (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of silicon sealant from inside / outside of dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T & P etc. complete in all respects as per approved drawings and directions of Engineer in charge Ground Floor

First Floor

Second Floor

Terrace Floor

Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/ NCL VEKA LTD.). Ventilator/ Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM, weathering seal resistant accessories, like clipping Jocking system tone including cost and c

First Floor

Second Floor

onveyance of all materials, accessories, labour charges, materials Nuotiosoite pine thermobninstalled at the nonaktsmeners, silicon rubber sealant, easy glazing/deglazing at site etc..and product conforming to ASTM D 638-14.EN-477-95 and other applicable codes and standards. Ground Floor

First Floor

Second Floor

Terrace Floor

PH WORKS Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming t

First Floor

Second Floor

Terrace Floor

Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. Ground Floor

First Floor

Second Floor

Terrace Floor

Providing two coats with Weather coat paint on plaster surface of approved shade on new works over a coat of primer to give an even shade including scaffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. Ground Floor

First Floor

Second Floor

Terrace Floor

Providing, and finishing wall and ceiling surface with water based wall putty of approved make on Out side plaster/ concrete surface and finishing the surface smooth and even by sand papering including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete. Ground Floor

First Floor

Second Floor

Terrace Floor

Painting two coat with Plastic Emulsion Paint over a coat of primer to make in even finished surfaces in all floors and heights to wall surface oa pproved make and shade including cost, conveyance, royalties , cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge. Ground Floor

First Floor

Second Floor

Terrace Floor

Painting two coat with approved Synthetic enamel Paint of approved brand make in even finished surfaces in all floors and heights to Iron surface of approved make and shade including cost, conveyance, royalties , cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge. Ground Floor

Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustarde of Size 32mmx32mmx2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification buffing polishing etc. including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge Ground Floor

Second Floor

First Floor

Terrace Floor

Water proofing application - Providing and application of two component polymer modified flexible cementitious waterproofing coating at a thickness of 1.5 - 2.5mm. The membrance should have elongation equal or more than 30% crack bridging ability up to 1mm, Adhesive strength 1.0N/mm2 @ 28d, Tensile elongation : 60% @ 20C, Shore a hardness >85 (between 3-7 days) etc, as per direction of E.I.C ( for longer span, in terrace panel of 4m x 4m should be done by groove cutting and filling with PU sealant) Second Floor

EI WORKS Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/ Polycab/ HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & falme retradant type) switch ISI marked Make-Schneider (Zencelo)/ legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. Group-A. L.P.-50 F.P.- C.B.-

Group-B. L.P.-100 F.P.-35 C.B.-

Group-C L.P.-50 F.P.-40 C.B.-10

Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FRLS/FRLSH PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard/Polycab) .

On Existing board.

Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. a)a)1x1.5mm2(1.19.2.SOR-17) Inverter wiring

a)2x1.5mm2(1.19.2.SOR-17) loop wiring

b)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17)

c)2x4mm2+1x1.5mm2 (1.8.3.SOR-17)

2e)4x10m2+ x2.5mm2(1.8.4.SOR-17)

S/F of 20W/18W LED batten light of crompton(slim LINEA /Dazzle ray)/ Havells/ Panasonic or Equivalent make.

S/F.of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of Ceiling rose.

S/F.of 9W/10Wt.LED lamps of Havels/Crompton make or Equivalent

S/F of 1200mm sweep energy efficient 5 star rated BLDC Ceiling fan (Make- USHA(Technix)/ Crompton( Energeon Riviera) Regulator or equivalent model of Havells/ Bajaj or other reputed make) with regulator compatible as per direction of Engineer-in-charge.

S/F of 300mm metal exhaust fan with wall cutting including all accessories of USHA(Aero clean)/Bajaj (Bahar) /Crompton (Drift Air) make & connection as per direction of Engineer-in-charge.

Supplying and fixing of stepped type modular regulator of ISI marked(ROMA/Crabtree/L&T/ Legrand)or equivalent make on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required.

S/F of 1x15W 5700K surface ceiling LED light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make(TRIM LED/ ENDURA NEO DL SURFACE/INTEGRA NEO SURFACE) /INTEGRA NEO/GRAND/HE/ EDGE PRO ROUND/SQUARE// Crompton( CROM ROUND/SQUARE) OR Equivalent model of Philips make as per direction of Engineer-in-Charge.(Basement-64)

S/F 1x15W LED of 3700K Warm white/6000K coolday white recess mounted downlighter made up of pressure die cast Al. heat sink and PC diffuser in white powder coated finish with integrated driver with ceiling cutting and fixing, Havells make(INTEGRA NEO/GRAND/HE/ EDGE PRO ROUND/SQUARE// Crompton( CROM ROUND/SQUARE) OR Equivalent model of Philips make as per direction of Engineer-in-Charge.

S/F.of Computer board consisting of 4Nos 5/6AMP modular socket & modular switch including suitable size of GI modular box and modular base &cover (ROMA/ Crabtree/ Havells/L&T or equivalent make)complete with connection as per the direction of Engineer-in-Charge.

Supplying and fixing suitable size GI box with modular plate and co

ver in front on surface or in recess, including providing and fixing 01 No.s of 6 pin 15/16A modular socket outlet and 15/16 A modular switch & and 01 no. of 5/6 A modular socket outlet and 5/6 A modular switch , connections etc. as required.Modular switches make-Anchor/ Legrand /Roma) (5+15 A switch socket board)

Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required.

S/F of suitable size Modular G.l. box for surface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet with 20/25AMP SP MCB of (Hager/L&T/ Legrand make) connection, painting etc as required.A.C

Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/Havells make) of modular type switch, connection, painting etc as required as per the direction of Engineer-in-Charge.

S/F of 1x90W 5700K LED street light made up of pressure die cast housing with toughned glassindividual high powered LEDs with secondary optics ,IP66 protection Havells make(ENDURA PLUS )/Crompton ORION NEO including all accessories,G.I bracket and connection.including GI bracket.

S/F of B.H fitting energy saving,surface mounted decorative round plastic bulk head 1x10Wt LED luminaires comprising high brightness LED with IP54 protection.Havells Make.(ELIPSE ROUND/ ELIPSE OVAL/Rugby) as per direction of Engineer-in-charge.(terrace-6nos.)

Supplying and fixing of 4 Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 3W 4 Modular foot light as a Bed lamp

Supplying and fixing of Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing of Modular Bulbul Callbell of ROMA or Equivalent make with connection, painting etc as required.

S/F of 4 sq.mm 2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100 grade(make-Havells/Polycab)(50mtr for street light)

P/F of 8 SWG Copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required (to be run along with cable for earth wire)( (SOR-3.20)

of S/F of (4+12) way Double door D. Box (Hager/ L&T/ C&S/Legrand ) with 63Amp FP MCB ,12x(6-32Amp) SP MCB of Hager/ L&T/Legrand/C&S or Equivalent make make including all accessories and connection. as per direction Engineer-in-Charge.

S/F.of Special earthing complete with provision of 600x600x3mmthick or (2ft x 2ft) copper plate, 38/40mm dia 3mtr long G.I.pipe , 25x3mm thick Cu.flat charcoal and salt,funel,earthpit chamber with masonary work including all accessories and connection as per direction of Engineer-in-charge(1 for panel ).

P/F of 25x5mm Copper strip wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required.

S/f.of Standard earthing with G.I.earth pipe 4.5m long 40mm dia including all accessories (With charcoal and salt) with masonary enclosure with coverplate having locking arrangement (Sl.No.5.2.of DSR2022) as per direction of Engineer-in-charge.

Supply of 2 Ton 3 star BEE rating 2024 rated split Air conditioners of make (Carrier/Blue Star/LG make).or equivalent make.

Installation and fixing of AC machine

5KVA,15Amp voltage Stabilizer of voltage range 90 V to 300V,Digital wall mounted (Model No VWR 500/VBG 500) of V-guard/Shakti/Luminous make

S/F of MS outdoor stand

Supply, Instalaiton, testing and commission of 11/8" Dia SOFT COPPER REFRIGERANT PIPING OF 18 swg insulated with 19mm thick nitrle rubber tubes as insulation material.

Supply, Instalaiton, testing and commission of 5/8" Dia SOFT COPPER REFRIGERANT PIPING OF 18 swg insulated with 19mm thick nitrle rubber tubes as insulation material.

S/F of double battery of 150AH with 2KVA Inverter of Make Luminous/Exide/Sfsonic including all accessories and connection as per direction of Engineer-in-charge.(grnd &1st floor)

Supply of double battery inverter trolly of PVC ( Reputed make as per the direction of EIC)

S/F of 15Ltr Geyser of Bajaj (Bajaj/AO smith/Havells/ Shakti/ Majesty-make) including fixing on wall and connecting with water inlet & outlet complete with all accessories and connection as per Direction of Engineer-in-Charge.

S/F of 95sq.mm 3&1/2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100V grade ISI mark(make-Havells/Polycab or Equivalent make ) as per direction of Engineer-in-charge.

S/M of end termination with brass compression gland and Al. lugs for 3.5Core 150 mm2 PVC insulated and PVC sheathed/XLPE Al. cable of 1.1kV as per direction of Engineer-in-charge.(DSR2022-9.1)

Electrical Inspection charges for building

Supply of Insulation mats Class A insulation of size 1Mx2Mx2mm.

(A-1) FIRE EXTINGUISHERS Providing & Fixing of fire extinguishers with necessary accessories etc. 6 Kg ABC (Powder Type) Fire Extinguisher. In HP Mild Steel Cylinders ISI marked fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683 (Make-Ceasefire/Minimax/Fireshield/Supremax/Safex)

ISI Marked portable fire extinguisher, 4.5 kg CO2 type fire extinguishers complete in all respect including initial fill and wall suspension brackets & shall conform to latest IS 15683 (Make-Ceasefire/Minimax/Fireshield/Supremax/Safex)

Installation,Testing and commissioning of 12 passenger strecher/ 780kgs/3 floors/3 stops/stainless steel car cabinhaving power operated cenre opening sliding door of stainless steel hairline finish,Microprocessor based contrl system,3ph,415Volts,battery operated emergency light and alarm door, call register signal and vf Door Operator ,ARD system Dot matrix LED indicators in car ,floor announciator, firemans switch,false ceiling in car ,infrared door screen, overload warning indicator, scaffolding,3 way intercom etc. including all accessories and connection of Jhonson/ Thyssenkrup/OTIS make as per direction of Engineer-in-charge.

S/F of 35sq.mm 3&1/2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100V grade ISI mark(make-Havells/Polycab or Equivalent make ) as per direction of Engineer-in-charge. (To be Connected from 630A main panel 160A floor Sub- panel )

of S/F of 8 way Double door D. Box (Hager/ L&T/ C&S/Legrand ) with 63Amp FP MCB ,4x(6-32Amp) SP MCB of Hager/ L&T/Legrand/C&S or Equivalent make make including all accessories and connection. as per direction Engineer-in-Charge.(Lift Room)

Supply and Installation of 32Ch 4 SATA 4K Network video Recorde

r, Supports Ultra 265/H.265/H.264 video Formats, HDMI & VGA Simultaneous Output, Upto 8 Megapixel resolution recording, Instant Playback 2 SATA HDDs, upto 10 TB for each HDD, ANR Technology to enhance the storage reliability (Make-UNV/ Honeywell/ CP Plus/HIKVISION Or equivalent reputed make as per the direction of engineer in charge)

Supply and Installation of 2MP IP Color metal Body Dome camera with inbuilt audio recording(1/2.8" CMOS sensor, 2MP (1920*1080)@ 30/25fps;720P (1280*720)@ 30/25fps, ultra 265, H.265, H.264, MJPEG, 120dB true WDR technology, supoorts 9:16 Corridor mode, Built-in Mic & Speaker, Smart IR up to 30Mtr IR distrance, up to 30m white Light distnace, supports 128 GB Micro SD Card, IP67 Protection, Supports POE Power Supply)

Supply and Installation of 2MP IP Color metal Body Bullet camera with inbuilt audio recording(1/2.8" CMOS sensor, 2MP (1920*1080)@ 30/25fps;720P (1280*720)@ 30/25fps, ultra 265, H.265, H.264, MJPEG, 120dB true WDR technology, supoorts 9:16 Corridor mode, Built-in Mic & Speaker, Smart IR up to 30Mtr IR distrance, up to 30m white Light distnace, supports 128 GB Micro SD Card, IP67 Protection, Supports POE Power Supply)

Supply and Installation of 16 Port IEEE 802.3 af and at GIGA POE 10/100/1000 Mbps managed Switch with minimum Two combo ports with minimum PoE power budget of 375W per switch. (Make: Cisco/D Link/Secureye or equivalent reputed make as per the direction of engineer in Charge)

Supply and fixing of 8 TB HDD(Make: TOSHIBA/SANDISK/Seagate or equivalent reputed make as per the direction of engineer in Charge)

Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.

Supply installation testing and commissioning of 32" IPS Display with 330 NITS, 1200:1 Contrast Ratio with 3yeras warranty. (Make: LG/Samsung/sony or equivalent reputed make as per the direction of engineer in Charge)

Supply installation testing and commissioning of 9U/500D Wall Mount Rack with 2nos FAN, 6skt 6/16Amp PDU and H/W Screw Packet(10sets).( Make: Valrack/Legrand/APW or equivalent reputed make as per the direction of engineer in Charge)

Supply and lying of 4-pair Cat6 UTP cable for camera connectivity in UPVC Conduits including all accessories.Make:Finolex, D- Link, Secureye.

Supply installation testing and commissioning of 32" IPS Display with 330 NITS, 1200:1 Contrast Ratio with 3yeras warranty. (Make: LG/Samsung/sony or equivalent reputed make as per the direction of engineer in Charge)

25mm dia C-PVC pipe (Ashirbad/Supreme/Oripalst)

32mm PVC ASTM( Sch-80) Pipe

Supply installation testing and commissioning of 32" IPS Display with 330 NITS, 1200:1 Contrast Ratio with 3yeras warranty. (Make: LG/Samsung/sony or equivalent reputed make as per the direction of engineer in Charge)

25mm dia C-PVC pipe (Ashirbad/Supreme/Oripalst)

1st Floor 20mm dia C-PVC pipe (Ashirbad/Supreme/Oripalst)

32mm PVC ASTM( Sch-80) Pipe

20mm dia C-PVC pipe (Ashirbad/Supreme/Oripalst)

40mm PVC ASTM( Sch-80) Pipe

50mm PVC ASTM( Sch-80) Pipe

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. G. Floor

40mm PVC ASTM( Sch-80) Pipe

50mm PVC ASTM( Sch-80) Pipe

1st Floor

2nd Floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge G. Floor

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall G. Floor

Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge 15 mm dia CP Long body Bib cock(Jaquar)CON-CHR-049NKN

15mm dia CP angle stop cock (FLR-CHR-5053N Jaquar make)

15mm dia CP Pillar cock (FLR-chr-5011N Jaquar make)

15mm dia CP two in one bib cock (FLR-CHR-5041N Jaquar make)

15mm dia CP Health faucet (ALD-CHR-573 Jaquar make)

15mm dia CP Sink Cock (FLR- CHR- 5347 NJaquar make)

15mm dia CP concealed stop cock Cat no - CON.CHR 089 KN

Revolving Shower with arm Jaquar Cat NO--OHS-CHR-1985 + SHA-CHR-477

25mm dia brass or gun metal fullway valve(Leader / Kriti Make)

32mm dia brass or gun metal fullway valve(Leader / KritiMake)

40mm dia brass or gun metal fullway valve(Leader / Kriti Make)

50mm dia brass or gun metal fullway valve(Leader / Kriti Make)

15mm dia CP flange

15mm dia CP extension piece

Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge 2000 litre capacity water storage Sintex tank on the roof of 2nd floor.

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge . 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white (Hindware / Parryware Make)

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge 110mm dia U-PVC SWR pipes(Supreme/Ashirvad)

75mm dia U-PVC SWR pipes(Supreme/Ashirvad)

100mm dia U-PVC 'P' trap

110mm dia U-PVC Door Tee

100mm dia U-PVC Plain Bend

100mm dia U-PVC Door Bend

100mm U-PVC Door Cross Tee

75mm dia U-PVC Door Bend.

75mm dia U-PVC Plain Bend.

110x75mm dia Reducer

110mm dia Vent cowl.

W/C connector

PVC Clamp suitable for 75mm to 110mm dia pipe

125mm dia CP grating

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C. pan) of (Parryware/Hindware/Cera/Somany/Kerovit) with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all c

omplete as per specification and direction of the Engineer-In-Charge.EWC with 'S' trap plain with seat cover(Parryware/ Hindware/ Cera/ Somany/ Kerovit)

One piece commod(Hindware)ELEMENT Cat No.92084.

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmx440 mm size wash hand basin With porcelain pedestal (Parryware/Hindware/Cera)

Half Padestal wash hand basin(Make:JAQUAR/HINDWARE/CERA/PARRYWARE) Half pedestal basin FNS-WHT-40801 Wall Hung Basin with Fixing Accessories Size: 620x480x185 mm & FNS-WHT-40305Half pedestal with Fixing Accessoriesfor 40801

Under Counter Basin (560x455) (Hindware)No.10095

Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge Design mirror(Parryware)

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge Glass shelf 600mm long(ACN-CHR-1171N)

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mm x 600mm long CP towel rail (Jaquar) ACN-CHR-1111SM

Towel Ring Round - (As Per Jaquar,Cat no.:ACN-CHR-1121BN)

Towel rack(Jaquar)CAN-CHR-1181

Paper holder(Jaquar)CAN-CHR-1151NMI

Soap dish holder(Jaquar)CAN-CHR-1131N

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder AKP-ABR-35731P(Jaquar make)

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink With sink cock with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge 600x450x250 mm SS sink(With drain board -NIRALI)

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge G. Floor

1st Floor

2nd Floor

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. G. Floor

1st Floor

2nd Floor

1st Floor

Supplying the waterproofing material Pidifin 2K of Dr.fixit on equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1"-6" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge. 1st Floor

2nd Floor

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(600x300mm Kajaria-Durenmarfil or equivalent make to be pre-approved by the Engineer-in-charge)

1st Floor

Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (600x600mm of Kajaria-Fogparla or equivalent make to be pre-approved by the Engineer-in-charge)

1st Floor

2nd Floor

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) including watering,curring and conveyance of all materials to site.

Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge

Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

EXTERNAL P.H. WORK. Supplying all materials, labour, T&P and laying in tre

nches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm all round concrete

160mm all round concrete

Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Man hole chamber Inside size 910mmx910mmx910mm

Paper holder(Jaquar)CAN-CHR-1151NMI

Soap dish holder(Jaquar)CAN-CHR-1131N

Cost of R.C.P.C.Cover.

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class Fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Brick masonry soakway pit 1.40m dia x 2.00m deep

Construction of 50 users RCC septic tank-1 No Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.

Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. 1x6.10x2.70x0.30

Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.50 mtr. in depth and depositing the soil within initial lead of 50 mtr. and as per specification approved by the Department.

Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

R.C.C beams,columns,girder and bressmer etc.

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

Supplying all materials, labour,T&P and providing 25mm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.

Dewatering with 5 H.P diesel engine pump during excavation

Supplying all materials, labour, T&P and fitting and fixing S.W.Tee of size 150mx150mx150m as per P.H.D.specification and direction of the E.I.C.

Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.

110mm U-PVC cowl

Sinking of (200 x150)mm dia bore well - 1 No by DTH method. Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below first level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit t

he site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only

Drilling of 150mm dia bore 45 mtr to 150mtr

Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from first level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 200mm dia P.V.C casing pipes 00 mtr to 45 mtrs

Cost of 200mm dia PVC (sch-80) pipe

Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge

Supplying all materials, labour, T&P for withdrawing casing pipes from the unsuccessful bore well including all necessary equipment and labour as per direction of the Engineer in charge .

Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.

Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 1.00 H.P single phase 3 stage head range 20 to 35 metres, discharge 145 to 110 L.P.M with outlet dia of 25mm

DOL controll pannel

2.5 Sqmm flat cable

32mm dia Steel short piece

Steel roop with cover

Well cap

50mm size CI bracket

20mm dia rigid UPVC pipe

32mm Dia brass non return valve(Shakti make)

32mm dia HDPE pipe

Labour charges for lowering of submesible pumpset with pipes and cables etc. with testing and commissioning at site.

Construction of 6.75mx3.60m x 1.40m(h) Rain water harvesting system 2no 200mm dia- 0.0m to 30.00m

200mm dia- 0.0m to 30.00m

Cost.of 200mm dia (Sch.80)Pipe

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class Fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Brick masonry soakway pit 1.40m dia x 2.00m deep

Construction of 50 users RCC septic tank-1 No Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.

Cutting slot in casing pipe for recharge of rain water

Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.50 mtr. in depth and depositing the soil within initial lead of 50 mtr. and as per specification approved by the Department.

Cost of washed gravel.

Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

40mm size bolder-2x6.0x2.50x0.85=

20mm size washed gravel-2x6.0x2.50x0.40=

Course sand-2x6.0x2.50x0.30=

Providing fitting and fixing M.S.grill,Jalli cover over the harvesty pindi

Supplying all materials, labour, T&P and constructing surface drain of size A-4 type with cement concrete (1:3:6) using 12mm size h.g chips on bed, 1st class K.B brickwork in cement mortar (1:3) inside, 12mm thick cement plaster (1:3) finished smooth with cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Earthwork in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to minimum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer in charge.

Earthwork in excavation of foundation in stonety earth mixed with gravel within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to minimum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing filling sand including watering, ramming and conveyance of all materials to site.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site.

Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete.

Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site. (1no)