Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹16.2 L
EMD Value
₹32,392
Closing Date
1 Aug 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT DIVISION Vimanapura Post Bangalore - 560 017
Building a furnished conference hall for the development of HTT_ 40 training aids at CSDO, Aircraft division HAL_BC Bangalore
8506
AC/PM/TN/C-01/07-2024 Dt:04.07.24
Works
Bangalore Complex- Aircraft Divn
₹0
₹32,392
1 Aug 2024
9 Jul 2024
9 Jul 2024
1 Aug 2024
HINDUSTAN AERONAUTICS LIMITED BANGALORE AIRCRAFT DIVISION
NAME OF THE WORK: Building a furnished conference hall for the development of HTT-40 training aids at CSDO, aircraft division, HAL (BC), Bangalore.
Name of the Contractor :
Sl. No. Sch No Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with detailed technical specification and tender drawings if any.
1 15.7.4 Demolishing brick work built in cement mortar ,manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge 0.5 cum 1892.77 Rupees One Thousand Eight Hundred Ninety Two and Seventy Six Paise Only 946.3825508
2 15.2.2 Demolishing cement concrete of nominal 1:4:8 or leaner mix manually/by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge 1.5 cum 1381.40 Rupees One Thousand Three Hundred Eighty One and Forty Paise Only 2072.100966
3 15.23.1 Dismantling tile work in floors and roofs(for thicknes of tiles 10mm to 25mm) laid in cement mortar including stacking material within 50 metres lead. 55 Sqm 67.43 Rupees Sixty Seven and Forty Three Paise Only 3708.90822
4 15.56 Dismantling of old plaster or skirting raking out joints and cleaning the surrface for plaster including disposal of rubbish to the dumping ground within 50meters lead 90 Sqm 50.21 Rupees Fifty and Twenty Paise Only 4518.767669
5 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge 1 Each 123.20 Rupees One Hundred Twenty Three and Twenty Paise Only 123.2015339
6 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead 2 Each 102.94 Rupees One Hundred Two and Ninety Four Paise Only 205.8871271
7 15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 7 Sqm 51.77 Rupees Fifty One and Seventy Seven Paise Only 362.3925805
8 1.1.18 Disposal of moorum/building rubbish/malba/similar unserviceable ,dismantled or waste material by mechanical transport including loading,transporting,unloading to approved municipal dumping ground for lead up to 10km for all lifts complete as per direction of engineering in charge .Note : Item to be applicable in urban areas having direction for restricted hours for movement/plying of laod carrying motor vehicke of 3.5 cum or more. 12 cum 453.94 Rupees Four Hundred Fifty Three and Ninety Four Paise Only 5447.326881
9 2.1.1 Earth work in surface excavation not exceeding 30cm depth but 1.5m in width as well as 10 sqm on plan inlcuding getting out and disposal of excavated earth up to 50m and lift up to 1.5m as direted by EIC.A. All kinds of soil. 4 Sqm 119.30 Rupees One Hundred Nineteen and Twenty Nine Paise Only 477.1877458
10 2.25 Filling available earth (excluding rock) in trenches ,plinth ,sides of foundation etc in layers not exceeding 20cm ,consolidated each deposited layer by ramming and watering lead up to 50 and foll all lift . 2 cum 180.07 Rupees One Hundred Eighty and Seven Paise Only 360.1416949
11 6.4.1 Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) with common burnt clay F.P.S. (non modular) bricks class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes 3.5 cum 8584.92 Rupees Eight Thousand Five Hundred Eighty Four and Ninety Two Paise Only 30047.23256
12 6.13.1 Half brick masonry in Cement mortar 1:3 (1 cement : 3 coarse sand) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 5 Sqm 1057.00 Rupees One Thousand Fifty Six and Ninety Nine Paise Only 5284.9875
13 13.2.2 Providing and laying plaster mix 1: 6 ( 1 cement : 6 coarse sand) of 15mm thick plaster on the rough side of single or half brick wall 150 Sqm 351.87 Rupees Three Hundred Fifty One and Eighty Seven Paise Only 52780.97034
14 4.1.8A Providing and laying in position cement concrete of specified grade(1:4:8 -1 cement :4 manufactured sand derived from Recycled concrete aggregates:8 graded stone aggregates 40mm nominal size recycled aggregates) excluding the cost of centering and shuttering - All work up to plinth level : 1 cum 4782.21 Rupees Four Thousand Seven Hundred Eighty Two and Twenty One Paise Only 4782.213157
15 4.2.3A Providing and laying cement concrete(1:2:4-1 Cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 5 cum 8885.49 Rupees Eight Thousand Eight Hundred Eighty Five and Forty Eight Paise Only 44427.4286
16 5.22.6 Steel reinforcement(Thermo-Mechanically Treated bars of grade Fe-500D or more.)for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. 100 Kg 99.08 Rupees Ninety Nine and Eight Paise Only 9908.490254
17 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 1575 Kgs 122.83 Rupees One Hundred Twenty Two and Eighty Three Paise Only 193463.6167
18 9.96.1 Providing and Fixing of alumnium sliding door bolts 300x16mm size ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 2 Nos 278.60 Rupees Two Hundred Seventy Eight and Sixty Paise Only 557.2090254
19 9.97.2 Providing and Fixing alumnium tower bolts 250 x10mm size , ISI marked ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 2 Nos 105.79 Rupees One Hundred Five and Seventy Nine Paise Only 211.5832458
20 9.100.1 Providing and Fixing alumnium handles 125mm long , ISI marked ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 2 Nos 60.87 Rupees Sixty and Eighty Six Paise Only 121.7315678
21 9.101.1 Providing and Fixing alumnium hanging Single rubber floor door stopper , ISI marked ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 1 Nos 36.38 Rupees Thirty Six and Thirty Eight Paise Only 36.38166102
22 9.103 Providing and fixing bright finished brass 100mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 )alumnium lever handles of approed quality with necessary screws etc complete 1 Nos 798.33 Rupees Seven Hundred Ninety Eight and Thirty Two Paise Only 798.3294025
23 9.84 Providing and Fixing alumnium extruded section body tubular type universal hydralic door closer (having brand logo with ISI mark) embosed on the body ,door weight up to 36kgs to 80 kg and door width from 701mm to 1000mm) with double speed adjustement with necessary accessories and screws etc complete 1 Nos 903.25 Rupees Nine Hundred Three and Twenty Four Paise Only 903.2482331
24 9.65.1 Providing and fixing ISI marked oxidised MS door latches of size 300x20x6mm conforming to IS 5930 with screws etc complte.(copper oxidised as per IS 1378) 1 Nos 90.36 Rupees Ninety and Thirty Five Paise Only 90.35697881
25 13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre 520 Sqm 67.94 Rupees Sixty Seven and Ninety Three Paise Only 35328.7978
26 13.8 Providing and applying white cement based wall care putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 55 Sqm 143.37 Rupees One Hundred Forty Three and Thirty Six Paise Only 7885.219725
27 13.83.2 Wall painting Two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. - 520 Sqm 131.19 Rupees One Hundred Thirty One and Nineteen Paise Only 68221.12678
28 13.112.1 Finishing walls with Premium Acrylic Smooth exterior paint(Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface) with Silicone additives of required shade: Old work 85 Sqm 120.63 Rupees One Hundred Twenty and Sixty Two Paise Only 10253.47292
29 13.100.1 Painting one or more coats with Aluminium paint of approved brand and manufacture of required colour to give an even shade on old work. 70 Sqm 88.20 Rupees Eighty Eight and Nineteen Paise Only 6173.857627
30 13.88 Removing dry or oil bond distemper ,water proofing cement paint and the like by scrapping ,sand papering and preparing the surface smooth including necessary repairs to scratches etc complete 510 Sqm 18.14 Rupees Eighteen and Fourteen Paise Only 9253.895975
31 13.81.1 Distempering one or more coats with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 510 Sqm 57.60 Rupees Fifty Seven and Sixty Paise Only 29378.19127
32 21.1.1.2 Providing and fixing Powder coated aluminium(min thickness of powder coating 50 microns) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 155 Kg 487.75 Rupees Four Hundred Eighty Seven and Seventy Five Paise Only 75601.7347
33 21.1.2.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever requiredincluding the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 75 Kg 582.89 Rupees Five Hundred Eighty Two and Eighty Eight Paise Only 43716.56218
34 21.2.1 Providing and fixing 12mm thick pre-laminated particle board (decorative lamination on one side and balancing lamination on other side)flat pressed three layer or graded wood particle board confirming to IS:12823 Grade I,type II,in panelling fixed in aluminium doors,windows,shutters and partition frames with C.P. brass/stainless steel screws etc.,complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. 7 Sqm 1046.71 Rupees One Thousand Forty Six and Seventy Paise Only 7326.954161
35 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 17 Sqm 1382.92 Rupees One Thousand Three Hundred Eighty Two and Ninety One Paise Only 23509.58129
36 17.7.2 Providing and fixing white Vitreous china wash basin size 630x450mm with C.I. brackets, 15 mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required 2 each 2045.41 Rupees Two Thousand Forty Five and Forty One Paise Only 4090.823788
37 18.49.1 Providing and fixing 15mm dia nominal bore CP brass bib cock of approved quality 2 each 465.61 Rupees Four Hundred Sixty Five and Sixty One Paise Only 931.2235254
38 18.58.1 Providing and Fixing 100mm nominal dia circular type PTMT grating of approved quality and colour 7 each 34.54 Rupees Thirty Four and Fifty Four Paise Only 241.8094237
39 17.16A Providing and fixing 8mm dia CP /SS jet with flexible tube up to 1 meter long with SS triangular plate to Eureopean type WC of quality and make as approved by Engineering -In-charge 1 each 320.77 Rupees Three Hundred Twenty and Seventy Seven Paise Only 320.7741653
40 17.28.1.1 Providing and fixing P.V.C. waste pipe (Semi regid pipe 32mm dia)for sink or wash basin including P.V.C. waste fittings complete. 6 Nos 95.46 Rupees Ninety Five and Forty Five Paise Only 572.7355424
41 18.21.1.1 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour: 15mm nominal bore with 30cm long 6 Nos 78.09 Rupees Seventy Eight and Nine Paise Only 468.5516949
42 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 4 Nos 154.67 Rupees One Hundred Fifty Four and Sixty Six Paise Only 618.6719831
43 17.22A Providing and Fixing CP brass 32mm size Bottle trap of approved quality or make and as per direction of Eingineer- in- charge 3 Nos 950.70 Rupees Nine Hundred Fifty and Seventy Paise Only 2852.101729
44 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 3 each 527.63 Rupees Five Hundred Twenty Seven and Sixty Two Paise Only 1582.877873
45 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 3 each 102.39 Rupees One Hundred Two and Thirty Nine Paise Only 307.1769788
46 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 3 NO 651.33 Rupees Six Hundred Fifty One and Thirty Three Paise Only 1953.998377
47 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
a 12.41.1 75mm diameter 12 Meter 228.58 Rupees Two Hundred Twenty Eight and Fifty Seven Paise Only 2742.956746
b 12.41.2 110mm diameter 20 Meter 346.73 Rupees Three Hundred Forty Six and Seventy Two Paise Only 6934.565085
48 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
a 12.42.1 Coupler
12.42.1.1 75mm diameter 5 Nos 84.25 Rupees Eighty Four and Twenty Four Paise Only 421.237161
12.42.1.2 110mm diameter 5 Nos 125.08 Rupees One Hundred Twenty Five and Eight Paise Only 625.4246398
b 12.42.4 Single tee without door
12.42.4.1 75x75x75 5 Nos 132.57 Rupees One Hundred Thirty Two and Fifty Seven Paise Only 662.862839
12.42.4.2 110x110x110 2 Nos 203.36 Rupees Two Hundred Three and Thirty Six Paise Only 406.7212458
c 12.42.5 Bend 87.5 degree
12.42.5.1 75mm bend 5 Nos 97.29 Rupees Ninety Seven and Twenty Nine Paise Only 486.4669068
12.42.5.2 110mm bend 4 Nos 138.13 Rupees One Hundred Thirty Eight and Thirteen Paise Only 552.5235085
12.42.6.1 75mm shoe 2 Nos 85.53 Rupees Eighty Five and Fifty Three Paise Only 171.0673051
12.42.6.2 110mm shoe 1 Nos 121.13 Rupees One Hundred Twenty One and Thirteen Paise Only 121.1343941
49 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
a 18.9.1 15 mm nominal dia Pipes 12 Meter 224.81 Rupees Two Hundred Twenty Four and Eighty One Paise Only 2697.755288
b 18.9.2 20 mm nominal dia Pipes 15 Meter 252.01 Rupees Two Hundred Fifty Two Only 3780.109703
c 18.9.3 25 mm nominal dia Pipes 20 Meter 326.52 Rupees Three Hundred Twenty Six and Fifty One Paise Only 6530.324407
50 18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms 3 No 144.15 Rupees One Hundred Forty Four and Fourteen Paise Only 432.4456525
51 12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
a 12.52.4 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. 75 Sqm 1403.82 Rupees One Thousand Four Hundred Three and Eighty One Paise Only 105286.322
52 17.10..1.1 Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink with drain board of size 510x1040mm bowl depth 250mm with CI Brackets and stainless steelpugs 40mm including painting of fittings and brackets cutting and making good the walls wherever required. 1 Each 6381.12 Rupees Six Thousand Three Hundred Eighty One and Twelve Paise Only 6381.122847
53 11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 9 Sqm 1221.91 Rupees One Thousand Two Hundred Twenty One and Ninety Paise Only 10997.1839
54 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete 40 Sqm 1164.90 Rupees One Thousand One Hundred Sixty Four and Ninety Paise Only 46596.08797
55 26.86.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat of size 45x85mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 5 Rmt 851.06 Rupees Eight Hundred Fifty One and Six Paise Only 4255.322182
56 26.87.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter 30mm thick of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 1.5 Sqm 3993.44 Rupees Three Thousand Nine Hundred Ninety Three and Forty Three Paise Only 5990.157801
57 9.70.1 Providing and Fixing IS 12817 marked stainless steel butt hinges of size 125x64x1.90mm with stainless steel screws etc 3 Nos 108.59 Rupees One Hundred Eight and Fifty Nine Paise Only 325.7812373
58 8.10.2 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.: Granite stone of Approved shade 3 Sqm 3722.55 Rupees Three Thousand Seven Hundred Twenty Two and Fifty Five Paise Only 11167.65403
59 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. : Granite stone slab colour black, Cherry/Ruby red: &Area of slab over 0.50 sqm. 2.5 Sqm 4718.87 Rupees Four Thousand Seven Hundred Eighteen and Eighty Six Paise Only 11797.16701
60 8.5 Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete 1 Each 899.16 Rupees Eight Hundred Ninety Nine and Fifteen Paise Only 899.1598898
61 17.32.4 Providing and fixing mirror of superior glass (of approved quality) andof required shape and size with plastic moulded frame of approvedmake and shade with 6 mm thick hard board backing : Rectangular size 1500x 450mm 1 Each 1922.90 Rupees One Thousand Nine Hundred Twenty Two and Eighty Nine Paise Only 1922.899407
62 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.11.41A.1Double charge vitrified tile polished finish of size
a 11.41A.1.1 Size of Tile 600x600mm 75 Sqm 1335.51 Rupees One Thousand Three Hundred Thirty Five and Fifty One Paise Only 100163.2605
63 14.83 Hacking of CC flooring including cleaning for surfcae etc complete as per direction of the Engineering In Charge 55 Sqm 3.17 Rupees Three and Sixteen Paise Only 174.3287924
64 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
a 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 1 No 5986.02 Rupees Five Thousand Nine Hundred Eighty Six and Two Paise Only 5986.023521
65 17.8 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge 3 Nos 7330.72 Rupees Seven Thousand Three Hundred Thirty and Seventy Two Paise Only 21992.16285
66 13.11 Finishing walls with textured exterior paint of required shade :
a 13.110.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. 65 Sqm 155.45 Rupees One Hundred Fifty Five and Forty Four Paise Only 10104.17949
67 2.35 Diluting and injecting chemical emulsion for post constructional antitermite treatement.
a 2.35.4.1 Treatement of existing masonry using chemical emulsion @one liter per hole at 300mm interval inlcuding drilling holes at 45 degree and plugging them with cement mortar 1:2(1 cement : 2 coarse sand ) to full depth of holes with Chloriphos/Lindane EC 20% with 1% concentration. 175 Rmt 39.51 Rupees Thirty Nine and Fifty Paise Only 6913.434322
68 8.27.1 Providing and Fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug including priming coat complete : 8.27.1 Kiln seasoned and chemically treated hollock wood 0.5 cum 172057.37 Rupees One Lakh Seventy Two Thousand Fifty Seven and Thirty Seven Paise Only 86028.6866
69 9.140.1 Providing and Fixing plain lining with necessary screws/nuts & bolts /nails,including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineering in charge (frame shall be paid separately).8.140.1- 12mm yhick commercial plywood ply confirming to IS 1328 BWR type. 45 Sqm 1125.12 Rupees One Thousand One Hundred Twenty Five and Twelve Paise Only 50630.45587
70 9.127.1 Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/sued finish with high density protective surfcae layer and reverse side of adhesive bonding quality confirming to IS 2046 Type S including cost of adhesive of approved quality . 1.50mm thick 45 Sqm 960.94 Rupees Nine Hundred Sixty and Ninety Four Paise Only 43242.49811
71 9.166 Providing and Fixing 18mm thick both sides pre-laminated cement bonded wood particle board as per IS 15786:2008 of approved brand and shade with suitable full threaded steel screws etc in partition,boxes,shelves,racks and cupboard,kitchen cabinet under kitchen counter etc all complete as per direction of Engineering in charge 20 Sqm 1251.58 Rupees One Thousand Two Hundred Fifty One and Fifty Eight Paise Only 25031.68525
72 9.167 Providing and fixing 6mm thick both sides pre-laminated cement bonded particle board as per IS 15786:2008 of approved brand and shade with suitable full threaded steel screws ect on the backing of racks,darwer,cupbaord,kitchen cabinet under kitchen counter etc all complete as per direction of Engineering in charge 9 Sqm 928.47 Rupees Nine Hundred Twenty Eight and Forty Six Paise Only 8356.206051
73 9.168 Providing and fixing shutter with 19mm thick one side decorative and other side balacing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bedning machine stc with auto claosing spring loaded hinges (hydralic type) etc complete as per direction of EIC .(Payment of providing and fixing auto closing hinges shall be paid separtelly) 6 Sqm 2599.31 Rupees Two Thousand Five Hundred Ninety Nine and Thirty One Paise Only 15595.88097
74 9.17.1 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc all complete as per direction of EIC. 12 Nos 171.34 Rupees One Hundred Seventy One and Thirty Four Paise Only 2056.115085
75 9.171 Providing and Fixing stainless steel soft closing spring hinges at o degree (hydralic type) of approved make /brand to cupboard shutters with threaded steel screws including making necessary recess in board and finished ect all complte as per direction of EIC. 25 Nos 249.89 Rupees Two Hundred Forty Nine and Eighty Nine Paise Only 6247.355932
76 14.5.1 Renewing glass panes with putty and nails wherever necessary including racking out ols putty .(float galss of nominal thickness 4mm(weight not less than 10kg/sqm) 5 Sqm 1002.01 Rupees One Thousand Two and One Paise Only 5010.057903
77 15.13.1 taking out doors,windows and clerestory window shutter(steel or wood) inlcuding stacking within 50m of lead. Of area 3 sqm and below 7 Sqm 131.84 Rupees One Hundred Thirty One and Eighty Three Paise Only 922.8630932
78 13.104.1 Polishing on wood work with ready mixed was polish of approved brand and manufacturer on old work 50 Sqm 91.69 Rupees Ninety One and Sixty Eight Paise Only 4584.45678
79 MR Supplying and Fixing "SUNLOCK / PRESTER / HILUX or other equivalent" delux model 100mm width fabric washable scotch guarded imported synthetic fabric vertical blinds with polypropylene, maintenance free self controlled runners, powder coated aluminium top channel with control unit on either sides, dust proof, ball chain for operating with plastic and nylon link chain, powder coated bottom weights with latest tilting mechanism on overlap of 12mm for each fabric in matching colours, etc., all complete as directed by the Engineer-in-Charge.MR Rate 65 Sqm 847.46 Rupees Eight Hundred Forty Seven and Forty Five Paise Only 55084.74576
Total (Excluding GST) 1372535.07
The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount
Tenderer's Quote (Excluding GST) 1372535.07 ABOVE % 1372535.07
Add 18% GST Rupees Two Lakh Forty Seven Thousand Fifty Six and Thirty One Paise Only 247056.31
Grand Total (Including GST) Rupees Sixteen Lakh Nineteen Thousand Five Hundred Ninety One and Thirty Seven Paise Only 1619591.38
Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.
WARNING: PLEASE ENTER PERCENTAGE QUOTE
HINDUSTAN AERONAUTICS LIMITED
Aircraft Division
Pre-Qulification Profile
Tender Ref No. or Contract No.: AC/PM/TN/C-01/07-2024
Name of Work: Building a furnished conference hall for the development of HTT-40 training aids at CSDO, aircraft division, HAL (BC), Bangalore.
Estimated Amount in Rs.: Rs.16,19,591/- including GST
PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory
2 Type of ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
4 Address for correspondence:
5 (b) Service Tax Registration No
5 (c ) Goods and Service Tax ID No.
6 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Pls Enter Mobile No
Ph. No. with STD code
FAX No. with STD code #N/A #N/A
7 Registered Contractor
If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
8 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No.
Name of the Bank
Type of Account
9 Details of person holding the power of Attorney (If different from contact person)
Ph. No. with STD code
FAX No. with STD code
10 DECLARATION I
The document have been read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 160) including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
11 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be submitted for evaluation of offer.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
PQ_Freeview.pdf
TENDER_DOCUMENT • 0.02 MB
Price_Bid_Freeview.pdf
TENDER_DOCUMENT • 0.11 MB
Technical_Bid_.pdf
TENDER_DOCUMENT • 2.77 MB
Tender_Notice_Works.pdf
TENDER_DOCUMENT • 0.18 MB
Price_Bid.xlsm
TENDER_DOCUMENT • 0.05 MB
ECS_Format.pdf
TENDER_DOCUMENT • 0.46 MB
Pre_Qualification.xlsm
TENDER_DOCUMENT • 0.02 MB
Undertaking_letter.pdf
TENDER_DOCUMENT • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .