REPAIR / MAINT TO FLOORING, TILING, JOINERY, PLUMBING, SANITARY FITING, CGI SHEET, PVC WATER TANKS, ROOFING, CEILING, PANELLING ETC AT RUPA AND GACHHAM IN THE AREA OF AGE B/R-II UNDER GE 859 EWS

Amount

Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed.

Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.

Supply and Fix 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed.

Dismantling timber scantling under 40 Sqcm in section as fillets, rails, posts, rafters, purlins etc in framed work complete all as specified and directed.

M&L for clean swan 2nd class hard wood in scantling

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

Supply and Fixing sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)

Supply and Fixing 3 mm thick figured glass, pin head glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)

Supply & Fix in repair vitreous china wash down water closet pan of pedestal pattern with cover, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified. (Make: Hindware /Parryware /Cera /Commander)

S&F in rep PVC (SWR) WC connector 110mm dia.

S&F in repair Vitreous China Squatting pan 'Orissa pattern' size 580 x440 mm white with integral foot rest.

S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, and brackets etc complete. (Make: Hindware /Parryware /Cera /Commander)

S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers

Supply and Fix in repairs plate rack made of stainless steel 0.50mm thick,over all size 762mm(H)x787mm(W)x254mm(D) complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets complete all as specified and directed(Make: Hindware/Parry)

Dismantling of floor, hearth or wall tiling including cement mortar bedding.

M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany). Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.

M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles .

M & L for 450 x 350 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany). Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.

M&L for Glazed ceramic coloured tilles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloure cement to match. Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.

Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets

S&F 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces.

S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces.

M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm.

M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Dismantling of CI soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings.

S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) pipes single socketed 75mm dia in any length with rubber ring joints fixed to walls

S&F PVC (SWR) bends any radius, bend 110mm dia with access door

S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm dia.

S&F PVC (SWR) bends any radius, with access door 75mm dia.

Taking up or down 15 mm bore steel tubing and connections including cleaning for re-fixing or removal to store all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store all as specified and directed.

S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal)

S&F 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal)

Dismantling of water tanks exc 500 ltrs & n. exc1000 ltrs capacity and removing to store.

S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in (Make : Sintex/Polycon /Poly Tap )

S & F in repairs fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.

Supply and fix in repair chromium plated brass Bib cock suitable for 15mm bore GI tubing complete all as specified and directed by Eng-in-charge.

S&F 15 mm dia brass CP wall / central hole / sink mixer for mixing hot & cold water screwed down for iron pipe and fixed for bath showers and kitchen sink, complete all as specified and as directed.

S & F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.

S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement.

S & F in repair 125mm overhead shower rose with Rubit cleaning system with shower arm and flange suitable for 15mm bore GI tubing complete all as specified and directed by Eng-in-charge.

S&F sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket guar and railing 60cm long, fixed in repair.

S&F health faucet of bass chromium plated with 1.5 mtr tube including holder complete all as specified and directed by Eng-in-charge.

S & F in repair fancy typy chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads, screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified (Make : Jindal/Leader/Scico)

S & F in repair chromium plated 15mm dia angle / stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified.

Supply and Fix in repair toilet paper holder supar of brass chromium plated fitted to wall with CP/ brass screws of complete all as specified and directed”

S&F in repair Grating doom 125mm dia with or without wast hole PTMT (Minimum weight 40 grms)

S&F in repair 32mm bore PVC wast pipe for kitchen sink ,WHB

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m graded stone aggregate as in landings, staircase slab, cover slabs(for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces.

S&F Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level)

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth using extra cement all as specified.

M&L for 75mm thick PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in path, hardstanding, plinth protection surface finished even and smooth using with extra cement

Repairs to Aluminum door shutter / windows of any size including taking down and cleaning / repairing / replacement of all fittings and fixtures (If required) and re-fixing in the same opening complete all as specified and directed at site by Engineer-in-Charge.

S & F in repair Door closer Aluminium (Die cast ) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm

Taking down shutters of any description n.exc 1.00 Sqm each and removing from site complete all as specified and directed.

All as item above but exc 1.00 Sqm and n.exc 2.00 Sqm each.

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete

Supply and fix 30 mm thick 2nd class hardwood plain framed paneled shutters (any numbers of panels) with panel of timber flat on both sides (feather edged) complete including fitted to chowkats

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

Material and labour for preparation of new or previously untreated surface of wood and wood based materials over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer

S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.

S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed

S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed

S & F 150mm size extruded aluminium alloy handles, fabricated type anodised

S & F 100mm size extruded aluminium alloy handles, fabricated type anodised

S&F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed

S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece

S&F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.

S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, and decorative end supports etc complete all as directed”

Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc.

M & L 15 mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement

M&L for 10mm thick rendering in cement mortar (1:4) on brick or concrete surfaces of ceiling finished even and smooth without using extra cement.

M&L for running welding n. exc 6mm in repair all as specified and as directed by Engr-in-Charge.

M& L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specifird and directed.

M&L for Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD), over a coat of wall care putty all as specified including preperation of surfaces

M&L for applying Two coats of cement base paint on surfaces of walls over one coat of alkali resistant primer all as specified and directed.

Material and labour for preparation of old distempered surface of wall incl washing down and stoping of distempered surface and appliying one coat of distemper oil emulsion all as specified and directed

Material and labour for preparation of previously treated plastered surface of wall and applying one coat of white wash on wall all as specified and directed.

All as per Item No. 95 above but on ceiling

Material and labour for preparation of old treatment on external surfaces of walls and washing down with water to receive the surface and applying one coat of cement base paint (colour and tint as approved) on walls etc complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Disconnecting water tank, of capacity between 500 & 1000 Ltr, setting aside ( or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnection and re-fixing in position. Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, etc.

S & F in Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats

Demolition of precast block walling built in cement mortor

M&L for PCC 1:3:6 type C1 (using 20mm graded aggregates) as in block masonry with solid blocks exc 10 cm in width and set in CM 1:4.

Material and Labour for dismantling of existing water closet after disconnecting the flush pipe, demolition of entire floor up to bottom of sunken portion, removing of debries, cleaning the top of RCC slab in sunken portion including pheripheral surfaces and plastered with 10mm thick cement & sand mortor (1:3) using WPC finished even and smooth w/o using extra cement cured properly and allowed to dry and applying two or more coats of epoxy resin/polymer modified cementatious coating like brush bond of Fosroc or equivalent both on floor and wall surfaces applied all as per manufactureres instructions and plastering the treated surfaces(after testing for water tightness) 15mm thick with CM 1:3 with WPC including providing 20mm dia GI spout with 300mm projection beyond outer face of wall complete all as specified and directed.

Material and labour for Prelaminated particle board 18 to 19 mm thick, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc complete all as specified and directed.

S&F in repair 30mm width of flaps Continous (Piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repair for 40mm dia cupboard knobs fixed with nut, screws and washer of wooden finish brass polished complete all as specified and directed.

S&F in repair magnet catcher to wooden frame work complete all as specified and directed.

S&F in repair sink coupling PTMT 40mm (half or full threaded) min weight 60gms

S&F in repair 1.00mm thick steel rolling shutters, gear operated type with bevel gear box and crank handle, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer, erected in position as indi cated, complete push pull or manual type with Safety lever locks mild steel with 4 levers.

Sikha Traders

M/S SM ANSARI

M/S R D TRADERS

M/S MURPHEW ENTERPRISES

D.P. Traders

M/S SUNRISE CONSTRUCTION AND CO

M/S ASHOK CONSTRUCTION