Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹45.8 L+₹78,975 (1.76%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹46.3 L+₹1.3 L (2.94%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹47.2 L+₹2.2 L (4.97%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹47.9 L+₹2.9 L (6.54%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
15 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
REPAIRS TO JOINERY IN CERTAIN OTM AND MD ACCN AT BAIRAGARH UNDER GE BHOPAL
2022_MES_526591_1
8888/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹90,000
Yes
5 Jul 2022
26 May 2022
17 Jun 2022
26 May 2022
15 Jun 2022
9 Jun 2022
60 days
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Taking down shutters of any description n.exc 1.0 sqm each complete all as specified and directed.
Taking down shutters of any description exc 1.0 sqm but n.exc 2 Sqm each complete all as specified and directed.
Taking down chowkhats or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed Note: Rates are included making good to disturbed surfaces like plastering and finish as per existing i.e white washing/distempering complete.
Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified. Note: Rates are included making good to disturbed surfaces like plastering and finish as per existing i.e white washing/distempering complete.
S&F factory made steel windows with side hung shutters including projecting type hinges/box type hinges with steel handle, and steel peg stay, complete including lugs with glazing bars, dovetailed or welded complete all as specified and as directed.
S&F factory made steel windows with side hung shutters including projecting type hinges/box type hinges with steel handle, and steel peg stay, complete including lugs without glazing bars, dovetailed or welded complete all as specified and as directed.
S&F factory made steel ventilator with top hung shutters including hinges with fixed type MS handles peg stay and tower bolt but with additional sash bars MS flats for fixing of wire gauge complete all as specified and directed.
S&F factory made Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified, directed.
S&F 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.
S&F 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and directed.
S&F Window ECO 4000, of double rebate openable/fixed window made of galvanised steel colour coated/powder coated (base steel as per IS 513 Of 'D' quality, galvanised as per IS 277 with zinc of 120 gms/sqm) with total thickness of coating 0.58 microns thick and back coated with alkyd backer 5-7 micron thick or powder coated with pure polyster powder up to 50-60 micron thick. Outer frame section 72 x 55 mm , center mullion section 72 x 50 mm, shutter section 47 x 20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the section cut to length mitre joined with corner bracket, center millions fixed with mullions cap, stay, handle, latch, 2 nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick plain float glass and S. S. mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propyelene Diamine Monomer) gaskets including fixing windows in the Concrete /Masonry wall by means of self expanding screw, including 10 mm square bars welded to 6 x 12 mm flat at a distance 150mm C/C (Pitch) etc complete all as specified and as directed.
M&L cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frames of pressed steel and in bed blocks etc complete all as specified and as directed.
S&F IInd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.
M&L for factory made 35 mm thick IInd class HW rail & style plain framed pannelled door shutter (two pannel) with lock rail & pannel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L for factory made 35 mm thick, IInd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (with out sash bars), edges of framing plain, chamfered or roundeed, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR part I, section 8, clause 8.24 (a) and fixing to chowkats complete all as specified and directed.
M&L for factory made 40mm thick flush shutters solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified and as directed.
M&L for factory made 30 mm thick, 2nd class hardwood, glazed and skelton window shutters, open rebated and preparaed to receive glass, gauze, etc. (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitread beads for secruing glass, etc; sizes of memebers of shutters as specified in SSR Part I, section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed.
M&L for 30 mm thick, 2nd class hardwood, glazed and skelton window shutters, open rebated and preparaed to receive glass, gauze, etc. divided in squares, with plain, chamfered or rounded, fitted with cut and mitread beads sash bars for secruing glass, etc; sizes of memebers of shutters as specified in SSR Part I, section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed.
S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed
S&F 150 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed
S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified.
S&F 100 mm mild steel butt hinges medium weight, cold rolled complete all as specified and directed.
S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed.
S&F 100 mm Aluminium handles, cast type, anodised complete all as specified and directed.
S&F 100 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed.
S&F 75 mm mild steel butt hinges medium weight, cold rolled complete all as specified and directed.
M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of wood primer complete all as specified and as directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperure 1.40 mm and fixed and with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F in repairs 3 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed
S&F in repairs 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each pane complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed and with tinned tacks, or galvanised wire staples complete all as specified and directed.
Dismantling of existing steel windows and providing box type hinges to replace the projecting type hinges including removal of existing hinges by welding and refixing the windows in same opening and repainting the existing surface etc at ground floor complete all as specified and directed.
All as per item No 35.00 but in first floor complete all as specified and directed.
Taking down aluminium doors upto 4 Sqm each and re-fixing in same position after carry out necessary repairs including replacing rubber/aluminium beading and jointing cleats, tightening if required including making good existing surfaces complete all as specified and directed. Note:- Any aluminium style, rail, frame, floor spring, hydraulic door closer if required to be replaced will be measured and paid seperately under respective items.
M&L for powder coated aluminium fabricated work as in doors, windows, partition as per manufacturer instruction complete including necessary jointing cleats, anodised aluminium snap beading including taking down damage portion of damage doors, windows or taking down complete door/window complete all as specified and directed. Note:Rates are including for necessary new fittings for door/window i.e handle, tower bolt, butt hinges etc complete.
M&L for 12mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed to aluminium door, partitions complete all as specified and directed.
S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg aluminium extruded section body complete all as specified and directed.
M&L in repairs 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws/nails to timber frame work complete all as specified and directed.
S&F IInd class hard wood, plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads area exc 13 sq cm and not exc 25 sq cm incl taking down old fillets complete all as specified and directed.
S&F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.
M&L 12mm thick lipping for external teak wood on veneered particle board or block board fixed with nails complete all as specified and directed.
S&F 100mm hasp and staple, safety type, anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed
S&F in repair 40mm dia cupboard/kitchen cabinet knobes fixed with nuts, screw and washer of MS, bright finshed complete all as specified and directed.
Welding in repair n.exc 2.5cm in length thickness of metal to be welded n exc 6mm thick complete all as specified and as directed.
Welding in repair exc 2.5cm and n.exc 5cm in length thickness of metal to be welded n exc 6mm thick complete all as specified and as directed.
Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling of timber scantling in fillets, rails, posts, rafters, purlins etc 40 sqcm and over in section, in any posotion for unframed works complete all as specified and directed.
S&F angle iron and rolled section as in main and cross beams hip, jack rafters, hollow section purlins, posts, where connected to common rafters and running rails and guides for sliddinng doors fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde E-250) quality -A, complete all as specified & directed.
S&F pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL/ make as per Appx 'C']
S&F pre- painted galvalume aluminum zinc coating GI Based plain steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL/ make as per Appx 'C']
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, moulding and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick or concrete surface in cm 1: 6 finishing the surfaces fair & even without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on brick/concrete surfaces including finishing the surfaces even and smooth without using extra cement) complete all as specified and directed
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of exterior water base emulsion paint on walls over a coat of primer complete all as specified and as directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and as directed. Note: Putty shall be measured and paid for seperately under respective item
M&L for applying one coat of white wall care putty 3mm thk on walls complete all as specified and directed.
S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F Floor door stopper 150mm long of aluminium ally body and tonge, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the permises complete all as specified and directed
M&L for Glazed ceramic coloured tiles 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed.
Deduct Schedule of credit (calculation will be done off line) Rs. 76,040.00
NDS TRADERS
M/S Nextage Construction
AJIT ENTERPRISES
H S ENTERPRISES
M/S BRIJLAL UPADHYAY
POONAM ELECTRIC INDUSTRY
M/S Shanti Traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .