Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAdmitted-Finance | ₹40.6 L | L1 | Admitted-Finance |
| 2 | L2₹47.9 LAdmitted-Finance | ₹47.9 L | L2 | Admitted-Finance |
| 3 | L3₹48.3 LAdmitted-Finance KOHLI NO 17509 GALI KHADDAR BHANDAR WALI BHI WALA ROAD BATHINDA PB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | ₹48.3 L | L3 | Admitted-Finance |
| 4 | L4₹49.8 LAdmitted-Finance BLDG NO XI 74 NEAR VALLARAM KULLANGARA TEMPLE KUNHIMANGALAM KOVVAPPURAM PO KANNUR DIST KERALA 670309 | KANNUR | KERALA | 670309 | ₹49.8 L | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s NIRMAN BUILDERS L1 | RS ENTERPRISES L4 | M/s BHUPINDRA ENGINEERING WORKS L3 | MODERN ENTERPRISES L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling the electric induction motor AC 3 Phase, capacity 60 HP to 125 HP, 440 V, 1440 RPM, 50Cycle of any make and type from the foundation and pump after disconnecting electric cable connection and earthing etc. and transportation to civil workshop for repair/rewinding, strip opening the motor and removing of defective burnt winding, rewinding the motor after cleaning the rotor and starter with super enameled copper winding wire of suitable turn and gauge as per the original with proper insulation including varnishing, providing all high grade material and class ‘B’ varnish for insulation, reassembling the complete motor and re-fixing at site with electric cable connection, earthing and testing the motor on full load at site after coupling the pump for its serviceability up to entire satisfaction of Engineer-in-charge.
Note :- (i) Super enameled copper winding wire shall be measured and paid separately under appropriate item of this BOQ in supply only.
(ii) Ball bearing if replaced shall be measured and paid separately under appropriate item of this BOQ in supply only.
(iii) The T & P/vehicles shall be arranged by the contractor and the cost deemed to be included in the quoted rates. | 12 | Each Job | 7,000 ₹84,000 | 6,000 ₹72,000 | 11,000 ₹1.3 L | 9,000 ₹1.1 L |
| 2.00 | All as per srl item No. 1 here-in-before but electric motor of capacity 15 HP to 50 HP complete all as specified and as directed by Engineer-in-charge | 20 | Each Job | 4,000 ₹80,000 | 5,000 ₹1 L | 10,000 ₹2 L | 7,000 ₹1.4 L |
| 3.00 | All as per srl item No. 1 here-in-before but electric motor of capacity 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge | 15 | Each Job | 4,000 ₹60,000 | 3,000 ₹45,000 | 6,500 ₹97,500 | 6,000 ₹90,000 |
| 4.00 | All as per srl item No. 1 here-in-before but electric motor of capacity up to 7.5 to 10 HP complete all as specified and as directed by Engineer-in-charge | 15 | Each Job | 3,000 ₹45,000 | 2,200 ₹33,000 | 3,000 ₹45,000 | 4,500 ₹67,500 |
| 5.00 | Disconnecting the pumping sets of capacity 60 HP to 125 HP any make and model from motor and all water connections and removing/taking up from foundation, taking to civil workshop for repair/strip opening and repairing of pumping sets by changing the defective/unserviceable parts such as bearing, shaft, impeller, bush, Gland plate etc. complete. Reassembling including oiling, greasing replacement of worn out nuts, bolts, gasket, glands etc and re-fixing in its original position at site, making all connections, commissioning and testing etc complete all as specified and as directed by Engineer-in-Charge. Note :- (i). Ball bearing, shaft, impeller, bush, Gland plate & stuffing box packing etc replaced as per requirement shall be measured and paid separately under appropriate item of this BOQ in supply only. (ii) The rates for minor repair, all other minor items essential for functioning of pump are deemed to be included in the quoted rates. (iii) The T & P/vehicles will be arranged by the contractor and the cost deemed to be included in the quoted rates. | 30 | Each Job | 6,500 ₹1.9 L | 15,000 ₹4.5 L | 13,500 ₹4.0 L | 9,000 ₹2.7 L |
| 6.00 | All as per srl item No. 5 here-in-before but pumping sets of capacity 15 HP to 50 HP complete all as specified and as directed by Engineer-in-charge. | 35 | Each Job | 6,000 ₹2.1 L | 10,000 ₹3.5 L | 7,000 ₹2.5 L | 7,000 ₹2.5 L |
| 7.00 | All as per srl item No. 5 here-in-before but pumping set of capacity 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge | 10 | Each Job | 5,000 ₹50,000 | 5,000 ₹50,000 | 5,000 ₹50,000 | 6,000 ₹60,000 |
| 8.00 | All as per srl item No. 5 here-in-before but electric motor of capacity up to 7.5 HP to 10HP complete all as specified and as directed by Engineer-in-charge | 10 | Each Job | 4,022 ₹40,220 | 2,200 ₹22,000 | 2,500 ₹25,000 | 4,500 ₹45,000 |
| 9.00 | Lifting the defective open well submersible pumping set of capacity upto 12.5 HP complete after disconnecting electric cable connection and transportation to civil workshop and back for repair and rewinding of open well submersible electric motor upto 12.5 HP by using PVC insulated copper conductor winding wire of suitable turn and gauge as per the original with proper insulation including varnishing, providing all high grade material and class ‘B’ varnish for insulation and carrying out the repairs of pump like replacement of bushes and other minor reapirs and reassembling the complete submersible motor pump, lowering including reconnecting the electric cable connection and testing complete all as directed by Engineer-in-Charge. Note :- (i) The rates for minor repair, jointing and jointing materials are deemed to be included in the quoted rates (ii) The cost of Rewinding of motor is deemed to be included in the rate quated by the tenderer. | 2 | Each Job | 7,000 ₹14,000 | 9,000 ₹18,000 | 9,500 ₹19,000 | 6,000 ₹12,000 |
| 10.00 | Supply only in replacement ball bearing No. 6316 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge | 8 | Each | 2,000 ₹16,000 | 2,000 ₹16,000 | 2,200 ₹17,600 | 2,000 ₹16,000 |
Updated dates
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
18 May 2026, 6:00 pmClosed
Vipin Chandra Rai
GE UTILITY BATHINDA
REPAIR TO PUMP, MOTOR, BEARING AND MOTOR STARTER PANEL AT DIFFERENT WATER SUPPLY INSTALLATIONS OF NORTH AND SOUTH SIDE UNDER GE UTILITY BATHINDA
2026_MES_760369_1
8942/2026-27/E8
Open Tender
Miscellaneous Works
270 days
Garrison Engineer Utility Bathinda
as per NIT
9 documents required · 9 mandatory
₹500
GE Utility Bathinda
₹99,800
Yes
20 May 2026
15 Apr 2026
20 May 2026
15 Apr 2026
18 May 2026
4 May 2026
All as per srl item No. 1 here-in-before but electric motor of capacity 15 HP to 50 HP complete all as specified and as directed by Engineer-in-charge
All as per srl item No. 1 here-in-before but electric motor of capacity 6 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge
All as per srl item No. 1 here-in-before but electric motor of capacity up to 5 HP complete all as specified and as directed by Engineer-in-charge
All as per srl item No. 5 here-in-before but pumping sets of capacity 15 HP to 50 HP complete all as specified and as directed by Engineer-in-charge.
All as per srl item No. 5 here-in-before but pumping set of capacity 6 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge
All as per srl item No. 5 here-in-before but electric motor of capacity up to 5 HP complete all as specified and as directed by Engineer-in-charge
All as per srl item No. 10 here-in-before but bore well submersible pumping set of capacity 6 HP to 12.5 HP complete all as specified and as directed by Engineer-in-Charge.
All as per srl item No. 10 here-in-before but bore well submersible pumping set of capacity 15 HP to 30 HP complete all as specified and as directed by Engineer-in-Charge.
Supply only in replacement ball bearing No. 6316 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6314 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6313 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6308 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6305 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6306 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6307 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6310 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6206 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6205 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6309 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement steel distance pieces suitable for 60 HP to 125 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement steel distance pieces suitable for 15 HP to 50 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement steel distance pieces suitable for 6 HP to 12.5 HP pumping set any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement steel distance pieces suitable for up to 5 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement gland plate studs/ eye bolt suitable for 60 HP to 125 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement gland plate studs/ eye bolt suitable for 15 HP to 50 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement gland plate studs/ eye bolt suitable for 6 HP to 12.5 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement gland plate studs/ eye bolt suitable for up to 5 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement carbon steel shaft high tensile strength with key suitable for pump set of capacity 60 HP to 125 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement carbon steel shaft high tensile strength with key suitable for pump set of capacity 15 HP to 50 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement carbon steel shaft high tensile strength with key suitable for pump set of capacity 6 HP to 12.5 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement carbon steel shaft high tensile strength with key suitable for pump set of capacity up to 5 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement cast iron impeller suitable for pump set of capacity 60 HP to 125 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement cast iron impeller suitable for pump set of capacity 15 HP to 50 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement cast iron impeller suitable for pump set of capacity 6 HP to 12.5 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement cast iron impeller suitable for pump set of capacity up to 5 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement brass/gun metal bush DE & NDE suitable for pump set of capacity 60 HP to 120 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement brass/gun metal bush DE & NDE suitable for pump set of capacity 15 HP to 50 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement brass/gun metal bush DE & NDE suitable for pump set of capacity 6 HP to 12.5 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement brass/gun metal bush DE & NDE suitable for pump set of capacity up to 5 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only bushes for open well type submersible pumping set of capacity upto 12.5 HP complete all as specified and as directed by Engineer-in-charge.
Supply only bushes for bore well submersible pumping set of capacity upto 5 HP complete all as specified and as directed by Engineer-in-charge.
Supply only bushes for bore well submersible pumping set of capacity 6 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge.
Supply only bushes for bore well submersible pumping set of capacity 15 HP to 30 HP complete all as specified and as directed by Engineer-in-charge.
Supply only super enameled copper winding wire for rewinding the electric motors as per existing grade and size complete all as specified and as directed by Engineer-in-charge. . Note :- Labour for motor winding shall be measured and paid separately under appropriate item of this BOQ
Supply and fixing in replacement three phase Amps meter of size 96x96x80mm, flush mounting on panel 0 to 200 Amp, digital type, complete all as specified and as directed by Engineer-in-charge.Make : Conzerv / Enercon /Siemens/ L & T/ AE/IMP/MECO
Supply and laying in replacement Flat three core PVC insulated and PVC sheathed industrial cable for submersible pumps, size 6 sqmm, 3 core, 1100 volts grade, confirming to IS 694 in existing lowering pipe and clamps nut bolts etc and making connections with motor and starter complete all as specified and as directed by Engineer-in-charge.
Supply and fixing pressure switch type PM/5 suitable for jet pumpset of cap 0.5 HP/ 0.75 HP for automatic operation of pump complete all as specified and as directed by Engr-in-charge.
Supply and fixing in replacement flexible spare tyre coupling TC-10/ TC -11/TC-9/TC-08 including alignment of pump and motor complete all as specified and as directed by Engr-in-charge.
Supply and fixing in replacement flexible spare tyre coupling TC-12/ TC -13 including alignment of pump and motor complete all as specified and as directed by Engr-in-charge.
Supply and fixing in replacement flexible spare tyre coupling TC-014/ TC -015 including alignment of pump and motor complete all as specified and as directed by Engr-in-charge.
Supply and fixing in replacement flexible spare tyre coupling TC -016/ TC-017 including alignment of pump and motor complete all as specified and as directed by Engr-in-charge.
Supply and fixing in replacement flexible spare tyre coupling TC -018/ TC-019 including alignment of pump and motor complete all as specified and as directed by Engr-in-charge.
Material & labour for painting of existing pumpset (with electric motor),pipe line and foundation of capacity 60 HP to 120 HP with spray paint carefully after dismentling the motor from foundation and assemble after painting as per approved tint complete all as specified and directed by Engr-in-charge.
Material & labour for painting of existing pumpset (with electric motor) pipe line and foundation of capacity 15 HP to 50 HP with spray paint carefully after dismentling the motor from foundation and assemble after painting as per approved tint complete all as specified and directed by Engr-in-charge.
Labour for taking out CI foot valve/Non return valve of any size from jack well approximate 3 mtr deep and refixing the same in original positions after fixing leather buffalow complete all as required at site Note - Rate of leather buffalow /nut bolts and rubber sheet will be included in this item .
Supply only oil imeressed graphite gland packing off sizes of superior quality.Make - Champion
Supply only copper thimble for copper cable of size 120sqmm as directed
Supply only copper thimble for copper cable of size 95sqmm as directed
Supply only copper thimble for copper cable of size 70sqmm as directed
Supply only copper thimble for copper cable of size 50sqmm as directed
Supply only copper thimble for copper cable of size 35sqmm as directed
Supply only copper thimble for copper cable of size 25sqmm as directed
Supply only copper thimble for copper cable of size 10-16 sqmm as directed
Dismantling the air blower of any capacity, 1440RPM, reciprocating type from the foundation and drain of comressor oil carefully and disconnecting electric motor connection and earthing etc and transportation to civil workshop for repair, opening the air blower and removing of defective piston rings, bearings and cleaning of piston and boring of cylinder if required and reassembling the complete air blower after replacement of bearing and piston rings and comressor oil and re-fixing at site and reassebmling with electric motor, earthing and testing the air blower on full load at site up to entire satisfaction of Engineer-in-charge.
Repair to Alum dozing system of filtration plant including replacement of complete stirrer system alongwith verticle power transmit shaft, bewel gear arrangment and MS iron angle base as per site requirment and directed by Engineer-in-charge. Note:- All the above mentioned items must be painted by Synthetic enemal paint and no extra amount shall be paid to contractor on this account.
Opening the top of unserviceable flat sheet valve 600 mm to 150 mm dia and taking out complete assembly from open inlet channel of filtratioin plant and repairing the same including and replace the same with new spindle with check nut, gate valve, ring , gland etc including replacement of worn out nuts, bolts gasket etc with new nuts, bolts gasket etc and refixing the same in original poistion after repairs and testing complete all as directed by the Engineer-in-Charge.
Cutting /Cleaning away all grass,bushes,under growth small tree roots,hedges,vegetation, branches of trees etc at installation of water supply up to entire satisfaction of Engineer -in-charge and disposing the same at a distance upto 50 mtr away from the prepherial area under clearence complete all as directed by Engineer-in -charge.
M&L for taking down existing 150mm/ 200mm dia CI/ DI pipe approx 3 to 4 mtr long of suction side of pumpset carefully and transport to workshop and making new threads after cutting of part of wornout threads and fixing of new flange of suitable size and refixing the same after assemble of existing non return valve/ foot valve at suction side of the pumpset complete all as specified by Engr-in-charge.
S&F in replacement MCCB, 4 pole, 400 Amps, 415 volt, 50 cycles, breaking capacity 36 KA, thermal magnetic release with two set of copper spreader links complete all as specified.
S&F in replacement MCCB, 4 pole, 250 Amps, 415 volt, 50 cycles, breaking capacity 36 KA, thermal magnetic release with two set of copper spreader links complete all as specified.
S&F in replacement MCCB, 3 pole, 200 Amps, 415 volt, 50 cycles, breaking capacity 36 KA, thermal magnetic release with two set of copper spreader links complete all as specified.
S&F in replacement MCCB, 3 pole, 160 Amps, 415 volt, 50 cycles, breaking capacity 36 KA, thermal magnetic release with two set of copper spreader links complete all as specified.
S&F in replacement MCCB, 3 pole, 125 Amps, 415 volt, 50 cycles, breaking capacity 36 KA, thermal magnetic release with two set of copper spreader links complete all as specified.
S&F in replacement MCCB, 3 pole, 100 Amps, 415 volt, 50 cycles, breaking capacity 36 KA, thermal magnetic release with two set of copper spreader links complete all as specified.
S&F in replacement MCCB, 3 pole, 63 Amps, 415 volt, 50 cycles, breaking capacity 36 KA, thermal magnetic release with two set of copper spreader links complete all as specified.
Supply only grease for motor pump as directed
Material and labour for rectifying the electrical fault of electric motor and LT panels at various pump houses including replacement of copper lugs ,cleaning of LT panel , servicing of power contactors ,and LT panel including copper and alluminium lugs replacement ,rewiring of burnt wiring , servicing of star delta starter as directed .
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.09 MB
BOQ_851699.xls
BOQ • 0.44 MB
8942new.pdf
Tender Documents • 1.42 MB
Download all tender documents and submit your bid
