MISC REPAIR TO CERTAIN BLDGS AND RUNWAY NORTH IN TECH AREA AT AF STN ADAMPUR.

Amount

Brick work using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified.

Brick work half brick thick wall using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified.

Re-securing or easing and adjusting of shutter of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each without taking down complete all as specified.

Aluminium anodised barrel tower bolt of extruded section 150mm long, ISI marked, complete all as specified.

Stainless steel, barrel tower bolt, 150 mm long, with stainless steel screws, complete all as specified. MAKE:PRAYAG CAT TBS-2150 or equivalent make mentioned in Appndix 'B'

Stainless steel, barrel tower bolt, 200 mm long, with stainless steel screws, complete all as specified. MAKE:PRAYAG CAT TBS-2200 or equivalent make mentioned in Appndix 'B' .

Stainless steel 100 mm long butt hinges with stainless steel screws, ISI marked complete all as specified. MAKE: PRAYAG CAT HG-3312 or equivalent make mentioned in Appndix 'B'

Aluminium handles anodised cast type 125mm long, ISI marked complete all as specified.

Stailess steel, handle, 125 mm long, curve shape with stainless steel screws, complete all as specified. MAKE: PRAYAG CAT DHC-2150 or equivalent make mentioned in Appndix 'B'

Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked, complete all as specified.

Stainless steel sliding door bolt with hasp and staple (bolt type) and fixing round typeclips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 250 mm long complete. MAKE: PRAYAG CAT HG-3312 or equivalent make mentioned in Appndix 'B'

Mild steel helical door spring 200mm, ordinary rat tail rod pattern including roller and roller plate ISI marked, IN REPAIR, complete all as specified.

Aluminium (Die cast) door closer hydraulically regulated designation No. 2 aluminium body universal type suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 kg complete all as specified

Double action floor door spring, hydraulically regulated, made of 1.25 mm thick aluminium alloy sheet, foundation box main body with stainless steel cover, governing pivot made of brass, rest of part made out of heavy duty mild steel, ISI marked, IN REPAIR, complete all as specified.

Mortice lock, brass body, 4 lever, 100 mm size, vertical type with two keys, complete all as specified.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples all as specified..

Aluminium frame ISI marked powder coated (minimum thickness of powder coating 50 micron) for doors,window,ventilators with one or more rebates aluminium section weighing 0.55 kg/m including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified.

Aluminium door shutter powder coated (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, 200 mm long almn handles -2 No's in each door, 100 mm size stainless steel/almn hinges, anodised aluminium snap beading, screws etc. complete all as specified.

Aluminium windows and ventilators / partition shutter powder coated (minimum thickness of powder coating 50 micron) fixed type without shash bars, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, aluminium fittings for each shutter such as peg stay 150 mm long (1No), 100 mm size butt hinges type B-21(02 No.), 125mm long suitable handle (1No.) etc. complete all as specified.

Aluminium windows and ventilators / partition shutter powder coated (minimum thickness of powder coating 50 micron) side hung type without shash bars, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, aluminium fittings for each shutter such as peg stay 150 mm long (1No), 100 mm size butt hinges type B-21(02 No.), 125mm long suitable handle (1No.) etc. complete all as specified.

Aluminium anodised grill, DG-117 type, ISI marked, for door / window opening complete. Make:- Deco-Grill

Pre-laminated particle board 9mm thick, interior grade, one side with decorative choice lamination & other side balancing white lamination fixed with screw to frame work complete all all as specified.

Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified.

Factory made 2nd class hard wood rail and style, thicknesss of shutters,30 mm, Plain framed, panelled shutter (any number of panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,etc complete all all as specified.

Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick wood grain finished colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, complete all as specified.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded wood grain PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styiles and wood grain colour PVC sheet for top rail, lock rail and bottom rail, panelling of wood grain colour PVC sheet to be fitted in the MS frame welded / sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement as specified in SSR Part II, complete all all as specified.

Factory made steel windows with side hung shutter with glazng bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete.

Factory made steel windows with side hung shutter without glazng bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete.

Steel windows or ventilators, fixed type made of MS sheet 1.25 mm thick box type (primer coated) , ERW hollow 'P' section of size 60mm x 25 mm complete all as specified.

NOTES APPLICABLE TO SERIAL ITEM NO. 27 TO 29: Profile section used under these items shall be 'P' tube as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable.

Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, PVC strip etc fixing as wall panelling up to ceiling level all included as per specification SSR part-I complete all as specified.

5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification SSR part-I complete all as specified.

Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified.

Pressed steel frames made out mild steel sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size butt hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC (1:3:6) type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified for size of frame: -

105 mm x 60 mm

125 mm x 60 mm

75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, and joints shall be sealed with joint sealing comound grade 'A' complete all as specified.

50 mm thick, cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified.

Glass dividing strips 38mmx3mm as in floor complete all as specified.

Machine cut Kota stone slab flooring 18-22 mm thick, area of each slab not less than 0.30 sq.m, (cut to size in square shape) laid over & including 20 mm thick (average thickness) cement mortar (1:4) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete, all as specified.

Machine cut Kota stone slab 18-22mm thick on vertical surfaces as in staircase riser, skirting/ dado etc over and including 10 mm thick rendering in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified

Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.

First quality, glazed ceramic, straight cut/joint free, 6-7 mm thick colored tiles, area of each tile exceeding 0.13 sq.m but not exceeding 0.16 Sq.m, on vertical surfaces such as dado etc over & including 10 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete, all as specified.

Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified.

First quality, Vitrified ceramic coloured tiles 9-10 mm thick, of size 600mm x 600 mm, in floors etc. over & including 20 mm thick cement mortar (1:6) screed, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, complete, all as specified.

First quality, Vitrified ceramic coloured tiles 9-10 mm thick, of size 600mm x 600 mm, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified.

Rendering 5 mm thick on fair faces of concrete surfaces, finished fair and even on ceiling surfaces in cement mortar (1:3), complete all as specified.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) complete all as specified.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as per manufacturers instructions, complete all as specified.

Repairing of damaged swollen RCC surfaces like projections chhajjas, facia, parapet etc including necessary scraping, cutting, chiseling, derusting and cleaning exposed reinforcement, washing apply cement slurry @ 3 kg/Sq.m and fiishing the surface with cement concrete (1:1.5:3) using 12.5 mm graded stone aggregate incl provision of welded mesh having weight not more than 3 kg / Sq.mm as reinforcement with and/or finished the repaired surface with cement and sand mortar (1:3) using WPC and work in patches area n.exc 5 Sq.m incl necessary formwork complete all as specified.

NOTE APPLICABLE FOR SERIAL ITEM 44 to 47: (i) Supply only water proofing compound (WPC) will be measured & paid separately uder respective item of BoQ, as applicable. (ii) Quoted rate shall includes the cost of scaffolding/shuttering upto 15 metre height.

Supply only water proofing compound, ISI marked, complete all as specified.

Three coats of white washing on new plastered ceiling surfaces, including preparation of surfaces, complete all as specified.

Three coats of white washing on new plastered wall surfaces, including preparation of surfaces, complete all as specified.

Two coats of cement base paint over a coat of water base primer on new plastered wall surfaces including preparation of surfaces, complete all as specified.

Two coats of interior acrylic distemper/oil bound distemper over a coat of putty filling on new plastered wall surfaces including preparation of surfaces, complete all as specified.

Sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane complete all as specified.

Plain tinted sheet glass, 5-6 mm thick, ordinary quality duly sticked with solar control reflective type film, having thickness not less than 25 micron and fixed air tight with neoprene packing & almn glazing clips, for aluminium sections, complete all as specified. NOTE: Almn glazing clips & neoprene packing will be measured & paid for under respective item of aluminium door/windows.

Frosted glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane complete all as specified.

Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified.

Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel & iron (new) surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.

Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors IN REPLACEMENT, of size: -

15mm bore

20mm bore

Disconnecting existing tanks, setting aside (or lowering if required) for cleaning/roof repair etc. and hoisting, reconnecting and re-fixing in position after necessary cleaning by removing all scale and dirt etc. including cleaning mouth of circulating service pipes after cleaning and writing “cleaned on ..... .... (Date, month & year)“ format with white painting complete including removing of all previous writing all as specified of following capacity.

Exceeding 250 litre but not exceeding 500 litre.

Exceeding 500 litre but not exceeding 1000 litre

White, three layered polyethylene water storage tanks (cylindrical vertical with closed top) including hoisted and fixed in position, making connections, IN-REPAIR, complete of following size & acessories: - (i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, IN REPAIR, complete all as specified. (iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIR, complete all as specified. (iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP.

500 litre capacity,

1000 litre capacity,

Ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass IN REPLACEMENT all as specified as following dia:-

15mm dia

20mm dia

Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete. MAKE: PRAYAG Cat No. 6610 or equivalent make mentioned in Appndix 'B'.

Concealed stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete. MAKE: PRAYAG Cat No. 6618 or equivalent make mentioned in Appndix 'B'.

Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete. MAKE: PRAYAG Cat No. 6608 or equivalent make mentioned in Appndix 'B'.

Center hole basin mixr, cast copper alloy, chromium plated fancy type, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete. MAKE: PRAYAG Cat No. 6650 or equivalent make mentioned in Appndix 'B'.

Vitreous China wash down water closet pan (pedestal pattern), white ISI marked, & including mild steel chromium plated hinging device & rag bolts and Jet spray (L-bend), stainless steel body with braded tube 1.50 metre tube, IN REPAIR, complete all as specified MAKE OF WC: PRAYAG Cat No. 4016 or equivalent make mentioned in Appndix 'B'.

PVC water closet seat and white cover with soft closing type with & including mild steel chromium plated hinging device & rag bolts, IN REPAIR, complete all as specified.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, ISI marked, white, with integral foot rests (excluding flushing cistern and flush pipe), IN REPAIR, complete all as specified.

PVC flushing cistern 6 litre capacity, syphonic action type, any shade, with side handle, ISI marked (IS: 7231) with flush pipe and all fixing arrangements, IN REPAIR, complete all as specified.

Vitreous China wash basin, white, flat back, size 550 x 400 mm ISI marked, complete all as specified. including fixing acessories like galvanised brackets with PTMT waste coupling half or full threaded suitable for & including 32 mm size PVC discharge pipe, IN REPLACEMENT, complete.

Vitreous China counter type wash basin, white, size 500 x 400 x 130 mm, with & including cast copper alloy, half or full threaded chromium plated waste coupling suitable for & including 32 mm size PVC waste/discharge pipe, IN REPAIR, complete.

PVC connections 15 mm size of length 450 mm with PTMT nuts, IN REPLACEMENT complete all as specified.

Stainless steel sink with drainage board, ISI marked, made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers including cantilever cast iron brackets connecting union etc overall size 940mm x 460mm x 203 mm with bowl size 405mmx 354mm IN REPLACEMENT complete.

PTMT shelf 250mm long fixed with and including chromium plated brass screws and wooden / plastic cleats IN REPLACEMENT complete.

Stainless steel (304 grade) grating with frame, wih or without hole 100-110 mm size, IN REPLACEMENT, complete all as specified.

PTMT 32 mm dia waste coupling (half or full threaded) complete all as specified.

75mm dia uPVC / PVC floor trap with grating including jointing with solvent and embedding in cement concrete type B-1 (1:2:4) IN REPAIR complete all as specified.

75mm dia uPVC/PVC cowls IN REPAIR complete all as specified.

uPVC pipes, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors / fixed to wall as SWR pipes, IN REPAIR, complete all as specified of size: -

40 mm external dia pipe

75 mm external dia pipe

110 mm external dia pipe

uPVC/PVC bends any radius, complete all as specified. suitable for uPVC soil waste discharge pipes, IN REPAIR, of size: -

40 mm external dia pipe

75 mm external dia pipe

110 mm external dia pipe

uPVC/PVC branch pieces, junction (single or parallel), complete all as specified. suitable for uPVC soil waste discharge pipes, IN REPAIR, of size: -

75 mm external dia pipe

110 mm external dia pipe

Taking down cement plaster of any description on brick walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified.

Taking down shutters of any description not exceeding 1.00 sqm each and removing from site all as specified.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening after easing adjusting and minor repair complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified.

Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified

Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.

M/s Sahib and Company