WBPHED/DIC/BMSD(D)/NIeT-4 OF 2025-2026/12

Amount

Supplying delivery of 100 Amps 415 Volt TPN Sheet steel enclosed Onload Changeover Switch side handle operated. AC-23

Dismantling all the switch gear items along with all of the electrical power circuit (from busbar to all the contractors) and control circuit (for diffrent switch gear items) routing making necessary cleaning of the all the different feeder by dismantling the existing fixed board (on which the switch gears were fixed) by prident electrician by proper elecrtical & electronics instruments as needed to complete the work as per direction of EIC

Fault finding of different feeders switchgear items,lamp,push buttons,capacitors & others items in MCC Panel at siteas per direction of EIC

Supply delivery of the following items for rectification of MCC Panel.

16-20 A TP MPCB Make-ABB

32 A 3P 240 V AC power contactor with no contact AC-3 duty, 230 volt Make-ABB

32 A No contact block for above contactor A-3 duty, 415 volt Make-ABB

32 A NC contact block for above contactor

25 A 3 P 240 V AC coil power contactor with no contact.AC-3,415 volt Make-ABB

25 A NO contact block for above contactor. Make-ABB

25 A NC contact block for above contactor. Make-ABB

230 V AC red indicating lamps. Make-ABB/ESBEE

230 V AC green indicating lamps. Make-ABB/ESBEE

6 A Green push button with 1 No element. Make-ABB/ESBEE

6 A red push button with 1 No element. Make-ABB/ESBEE

415 V AC Digital Over voltage/under voltage/SPP voltage monitoiring relay. Make-GIC

230 V AC On-Dely timer. Make-GIC

0-600 A 96 SQ.MM. analog ammeter. Make-AE

0-500 A 96 SQ.MM. analog voltmeter. Make-AE

5-60 A Motor protection realy (BOCR/MPR 300). Make-BCH/L & T

6 A SP MCB( for control). Make-ABB

150 A 3 Way power terminal. Make-PTR

1 SQ MM FRLS wire

2.5 SQ MM FRLS single core wire

4 SQ MM FRLS single core wire

6 SQ MM FRLS single core wire

Supply of related Hardware for rectification (pin,fork,ring socket,ferrule, Sprial,cable tie,PVC Tapes,cable tie 100mm,cable ducts,metal sheets, nuts, bolts,washers etc. board for fixing items etc with complete new wiring to both the control and power circuit to complete the job as per direction of EIC

Rectification of MCC panel with cutting the old damaged wire and supply of new wiring and making complete connection of all the control and power circuit of all feeders by proper prudent electrician as per direction of EIC .

Fitting fixing and of above supplied materials as in item no 3(i to xiv) with supply of necessary wire, hardware & wiring materials including servicing, testing, Commissioning the panels up to a certain period of operation upto the satisfaction of EIC, as per direction of EIC .

Fixing 100 Amp 415V TPN Sheet Steel enclosed Changeover on Flat Iron Frame/Angle Iron Frame on wall

Add: 18% GST

Add: 1% Cess

ABHIJIT MUKHERJEE (BID ID -6825038)

M/S NABIN GOPAL SENGUPTA (BID ID -6825033)