PROVN OF 2X SENTRY POST (01 X SUGNU VILLAGE GATE 01 X SAINIK COLONY GATE) OF 107 ENGR REGT, PROVN OF 2 X SEPTIC TANK SOAK WELL FOR 500 MEN OF 107 ENGR REGT AND PROVN OF 01 X OR TOILET BLOCK IN 23 ARTY BDE SIG COY OFFICE COMPLEX AT DIPATOLI MIL STAT

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for rough finished surfaces of concrete formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for reinforced cement conctere (Nominal Mixed) type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrte surface in CM (1:6) surface finished even & smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrte surface in CM (1:4) surface finished even & smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering on fair faces of brick work or concrte surface in CM (1:3) in ceiling surface finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plaster surface of wall and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plaster surface of ceiling and applying three coats of white wash complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified and as directed.

Removing excavated materials to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in subbase complete all as specified and as directed.

M&L for 40mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor, finishing surface even and smooth using extra cement complete all as specified and as directed.

Supply only glass dividing strips, 3mm thick and 38mm wide complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and as directed.

S&F powder coated aluminium doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, fixed or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F 4mm thick sheet glass, ordinary quality frosted on one side and glazing with rubber gasket as in aluminium window in square n exc 0.50 sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for coloured chequered cement concrete tiles with grey cement and no pigment (30cm x 30cm) x 25mm thick, with and including over 15mm thick screed bed in CM (1:6), set, jointed and pointed in grey cement slurry and pigment in floors complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrte surface in CM (1:4) surface finished even & smooth without using extra cement mixed with water proofing compound complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately under respective items of BOQ.

Supply only water proofing compound complete all as specified and as directed.

M&L for providing pre cast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates) and set in CM (1:4) as in cover slabs for drain, manholes etc. including necessary form work complete all as specified and as directed.

S&F mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in coping, moulded or chamferred edges and like complete all as specified and as directed.

M&L for PCC(1:2:4) type B1 (using 20mm graded stone agg) in surface channels and drain complete all as specified and as directed.

M&L for salt-glazed stoneware 150 mm dia drain pipes laid in trenchess and jointed complete all as specified and as directed.

M&L for concrete bed to drain pipe 150mm dia bore including packing under and complete surrounding pipe with cement concrete (1:3:6) type C-2, after they are laid and tested complete all as specified and as directed.

M&L for salt-glazed stoneware 200 mm dia drain pipes laid in trenchess and jointed complete all as specified and as directed.

M&L for concrete bed to drain pipe 200mm dia bore including packing under and complete surrounding pipe with cement concrete (1:3:6) type C-2, after they are laid and tested complete all as specified and as directed.

M&L for 5mm thick setting coat in cement mortar (1:2), trowel led to even and smooth complete all as specified and as directed.

Construction of septik tank, excavation in ordinary soil, foundation in PCC (1:2:4), brick work in CM (1:4), RCC slab covers including RCC precast manhole cover having 6mm plate embeded all around/fibre reinforced cover with angle iron frame, vent shaft and sludge chamber etc. complete for 500 users as per CEJZ TD Drg No CEJZ/TD/57 Sheet No 2/4 and Sheet No 3/4 complete all as specified and shown on drawings.

Construction of soakage wells exc, in ordinary soil, foundation in PCC 1:3:6, wells of honey combed and solid in concrete including intercepting chamber scren chamber brick work in CM 1:4, RCC cover slab , filling with brick bats complete of size 3.6 M X 4.5 M deep as per CEJZ TD Drg No CEJZ/TD/58 complete all as specified and shown on drawings.

M&L for moorum / red Bajari filling in floor or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Use and waste form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical or to batter of fair finished surfaces complete all as specified and as directed.

Use and waste form work to sides of columns, pillars etc. of fair finished surfaces complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete all as specified and as directed.

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregates) as in column footing including raft footings, foundation, plinth beam, bases of columns etc. (1:2:4)

M & L RCC type B-1 1:2:4 using 20 mm graded stone aggregate as in lintel bend, beams etc complete all as specified and as directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in colums, pillars etc complete all as specified and as directed.

S&F mild steel TMT bar 6 to 8 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for 15 mm thick rendering on brick work or concrete surface in two layers, first layer 10 mm thick in cement mortar (1:4) and second layer 5mm thick in cement mortar (1:4), both layers mixed with water proofing compound, surface finished even and smooth without using cement complete all as specified and as directed.

M&L for 12 mm thick rendering on brick work or concrete surface in cement mortar (1:6), surface finished even and smooth without using extra cement complete all as specified and as directed.

S&F PVC solid factory made door frame of size (50mm x 47mm) made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2009 and as directed.

S & F 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

S & F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised iron tube, 15mm dia medium grade with all fitting such as bends, elbow, socket, reduce etc fixed to walls and ceiling or laid in floors complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised iron tube, 20mm dia medium grade with all fitting such as bends, elbow, socket, reduce etc fixed to walls and ceiling or laid in floors complete all as specified and directed.

M&L for cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar (1:3) to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed.

S&F 500 ltr capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I, with and including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe, GI overflow pipe, GI washout pipe and fixed complete all as specified and as directed.

S&F 20mm bore gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fixing PVC connection 15 mm dia 600 long with PVC nut at both ends complete all as specified and as directed.

S&F vitreous china wash hand basin, white, flat back of size (550 mm x 400mm) with angle iron brackets, including fixing bracket, complete all as specified and as directed.

S&F 15 mm dia bore pillar tap brass chromium plated with capstan heads screwed down high pressure with or without letter ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipecomplete all as specified and as directed.

S&F in repair viterous china squatting pan 'ORISSA PATTERN' of size (580mm x 440mm), white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S&F 100mm cast iron sanitary connection socket to fit WC out let, complete all as specified and as directed.

S & F 10 Ltr capacity PVC low level cistern “white” with inlet float valve including bracket with and including 32 mm dia PVC pipe 600 mm long, complete all as specified and as directed.

S & F 32 mm bore low-density polythene pipes (LDPE) of pressure rating 6 kgf / Sqcm, complete to walls, ceiling or in floors etc, complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring, fixed on wall complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring, joints laid in trenches complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) bend complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) vent cowl, complete all as specified and as directed.

S&F providing precast cement concrete louvers and jallies, 35mm thick (measured solid), including all mouldings in precast cement concrete (1:2:4) type BO (using 12.5mm graded stone aggregate) set in cement mortar (1:4) complete all as specified and as directed.

S&F 15 mm bore bib taps, chromium plated cast copper alloy, high pressure screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F 15mm dia bore cast copper alloy chromium plated angle stop cock complete all as specified and as directed.

M&L for point wiring with 2x1.5 Sqmm single core PVC insulated unsheathed copper multi stranded conductor (Phase-Red Colour and Neutral- Black Colour) in and including concealed PVC conduit of size 20mm for incomer circuit and 25 mm for out going circuit marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3mm thick sheet cover of suitable size complete including PVC insulated stranded copper conductor 1.5 Sqmm as earth wire (green colour) to common earth dolly for connection to ceiling rose to earth terminal including cutting chasses and making good distrubed surface to match with existing finish with plaster for One light/Fan point controlled by one one way switch complete all as specified and as directed.

Description all as per ser item No. 72 here-in-before but for one 3 pin socket outlet 5 Amps on the same board complete all as specified and as directed.

Description all as per ser item No. 72 here-in-before but for point wiring with 2.5 Sqmm for 15 Amp socket out let with 2.5 sqmm earth continutiy complete all as specified and as directed.

S&F switch piano type single pole 5 amp 230 v complete all as specified and as directed.

S&F ceiling rose surface type bakelite (65x50) mm three terminals complete all as specified and as directed.

S&F lamp holder PVC polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F socket outlet 2 in 1, 6 Pin, 5 and 15 amp complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 Pin, 5 amp complete all as specified and as directed.

S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps to 32 Amps complete all as specified and directed at site. Make-Havells Cat part No. DHDPUSN020/DHDPUDP020 or equivalent as per list of makes.

M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor FR PVC insulated and sheathed cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire (Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

Supply and fix MCB DB SPN 4 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed at site. Make -Havells Cat part No.DHDPSHODRW04 or equivalent as per list of makes.

S&F MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. Make Havells cat part No. DHMGCSPF006-32 or equivalent as per list of makes.

S&F MCB DP 40 Amps 'C' Series 10 KA complete all as specified and directed.

S&F LED tube light fitting 1x18/20 watt 230 Volt decorative ultra slim linear LED Lighting with extruded polycarbonate, including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make : Cat/part No. LUMILINEBS20WLED865SPCWH of Havells or equivalent in philips/Wipro/Jaguar.

S&F of bldg LED security light fitting 25 watt in aluminium pressure die cast housing with toughened glass cover (IP65 protection) luminairies with high power LED as light source with and including suitable size of GI bracket fixed with two GI clamp, nuts, bolts washers etc complete all as specified and directed at site. Make : Jaguar Cat part No. LTRUMP0025XC or equivalent in Havells / Philips.

Supply, laying in trench/on walls as per site requirement, jointing, testing and commissioning with XLPE insulated, armourred, heavey duty, PVC sheathed electric cable with aluminum conductor, 1100 volts grade connecting to with new cable aluminium lug and cable glands of cross sectional area 10 sqmm 2 core complete all as specified and as directed. Note:- Excavation, earthwork and protection of cable shall be measured and paid seperately.

M&L for sand filling in cable trenches for cable protection with clean dry sand unwashed incl gently punning, complete all as specified and as directed. Note:- Thickness of punned surface shall be measured and paid.

M&L for bricks sub class 'B' kiln burnt, well burnt, laid as in trenches/cable cover/protection complete all as specified and as directed.

Supply and laying GI pipe 25mm bore medium grade with all fittings and clamp laid in trenches / wall / floor concealed or open execution complete all as specified and directed at site.

S&F gun metal globe or gate valve 25mm bore with iron wheet head, screwed both ends for iron pipe complete all as specified & as directed.

M&L for ferrule for tapping from existing water mains, straight plain brass ferrule or connecting screws both ends and fixed 25mm bore GI pipe complete all as specified and directed.

S&F in replacement metallic ventilating air fan single phase 300 mm sweep 900 RPM complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed. Make : Havells model ventil Air - DB or equivalent as per list of makes.

Delhi Enterprises

M/S.R.S.Chauhan and Sons

m/s sheo kumar singh & sons

BHARATI ENTERPRISES

M/s Ray construction

M/s Mukesh and company