Renovation of Dispensary ground floor for accommodating PRMB Cell for CPRSME and CPRMSNE at Koyla Vihar Colony of WCL HQ

Amount

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with whitecement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed vitrified floor tiles polished finish of size of Size of Tile 600 x 600 mm mixing glazed /ceramic/vetrified floor tiles with cement based hifh polymer modfied quicksettile adhesive (Water based ) Confirming ti IS: 15477, in average 3mm thickness. Deduct for not using 20 mm thick cement mortar 1:4 (1cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately)

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns saving moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully hreaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 4x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.

Providing & Fixing Panelling of 18 mm thick marine ply of ISI mark on alumium frame work of including all labour & material as per instruction of Engineer Incharge

Providing & pasting 1mm thick good quality mica over 18 mm marine plywood on wall pasting with fevicol using abrotapes and bedding for proper packing including all labour & material as per instruction of Engineer Incharge

Providing & insertion of 50x25 mm thick good quality wooden bedding free from knot inside alumium frame work of material 50x25x1.0 mm thick aluminium frame work for fixing 18 mm thick marine ply on wall including all labour & material complete as per instruction of Engineer Incharge

Brick work with non modular fly ash bricks conforming tovIS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) . For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing & fixing file storage arrangement up to 3.00 mtr height & 450 mm depth, with required selves & smooth shutter arrangement with necessary system. The complete froming is to be made with 35 mm thick plywood & shutter in 18 mm thick plywood, all the plywood faces to be laminated with I mm thick approved colour laminate including all necessary hardware are of hafale/hetich or equivalent make for locking arrangement, etc. storage system is tobe fixed to the wall over frame work of aluminium tube 25 X50mmX1.60mm (thickness) 600mm c/c mm etc. to complete the job as par instruction of engineer in charge.

Providing and fixing free standing Table made out of 25 mm thick postfarm top and 18 mm thick gable end & modesty pannel plywood as per IS:303 with SF (suece finish) 1 mm thick laminited including PVC edge band, All necessary hardware are of hafele/hettich or equivalent make to complete the job as per instruction of Engineer Incharge. with size of Table size. 1200X750X750(H) mm

Providing & fixing 18 mm thick partition up to 3.00 mtr height. Modular partition system made out of 80 mm thick extruded aluminium sections frame work having both side 9 mm thick plywood as per 15:303 with front face laminated with 1 mm thick laminate of approved colour and shade and other balancing surface with sealed alround edge & 5 mm thick glass in upper middle portion with required froasted area soft board at suitable height including skirting arrangement for wire management & All necessary hardware are of hafele/hattich or equivalent make to complete the job as per instruction of Engineer Incharge

Providing and fixing stainless steel Bottom Corner lock patch for Toughened glass door etc complete.

Providing and fixing IOOJET Brass door pull handle size 12-18 Inches etc. complete

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content les: than 50 gram/litre, of approved brand and of required said and colour complete to give and even said. Old work (cne or more coats)

Providing and fixing of modular work station for 1200 mm height, made out of 60 mm thick extruded aluminium section frame work with 9 mm thick plywood front face laminated with 1 mm thick laminates and other balancing face, including necessary soft board/white board,elc. Work top is made out of 25 mm thick postlarm & gable end with 18 mm thick plywood as per 15:303 SF finish 1 mm thick laminated including soft board.skirting arrangement for wire management & all necessary fasteners & fixtures to complete the job as per instruction of Engineer Incharge Size of work station (1200x600x1200 wide work top platfarm)

Total impact of GST for the purpose of CTC

M/s B B TIWARI

M/S AUSTBHUJA

SANTOSHKUMAR RAI