Replacement of deteriorated tower type DA0 at 66kV Tower No.71 in the existing 66/11kV DG3-DG4 DC line from existing 66/11kV Manyatha Tech Park S/s., to existing 66/11kV Hoskote S/s near Hirandahali lake limits ,Bangalore rural.

Replacement of deteriorated tower type DA0 at 66kV Tower No.71 in the existing 66/11kV DG3-DG4 DC line from existing 66/11kV Manyatha Tech Park S/s., to existing 66/11kV Hoskote S/s near Hirandahali lake limits ,Bangalore rural.

66KV DA plus 3 Kalpataru design towers Fabricated Steel members 66kV KPTCL design Narrow base towers DA type tower with Special stub One meter more than normal stub special design and drawing approval...

Supply of Galvanised Bolts & Nuts for DA type tower

Phase plate Set of 3 per tower

Earth bond 450 mm long

Grounding of tower with GI Pipe including the cost of GI pipe

Ground Wire plain Terrain 7/3.15mm

Single Suspension clamps Bolt nut type clamp with Hardware arcing horn

Single Suspension string of 4 units of Disc insulator90KN disc insulators

P G Clamps suitable for Coyote ACSR

Vibration dampers for Coyote ACSR

MSC joints for coyote ACSR

Repair sleeves for coyote ACSR

C Wedge connectors for coyote ACSR

P G Clamps suitable for ground ACSR

Single suspension clamps bolted type suitable for Ground conductor

MSC joints Ground conductor

Repair sleeves for Ground conductor

Check Survey by using their own equipments in Plain terrain

Sorting of Tower Parts made of Fabricated angle iron

Setting of stub templates and aligning dismantling and transportaion of templates from one location to another location for66kV

Supplying and fixing GI angle iron 45 x 45 mm 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer surface of tower to facilitate running o...

Supplying and fixing Barbed wire

a) Assembling and erection of towers including tightening of bolts and nuts including loading, unloading at store and site (Including the Wt. of stubs) including sorting of tower parts made of fabrica...

b) Revitting of towers bolt ends Under Line clear condition

Welding of bolts and nuts

Phase plate (Set of 3 per tower )

Grounding of tower with GI Pipe including the cost of GI pipe

Stringing of Conductor without allowing the conductor to touch the ground and without damaging the conductor.a) Paving out conductor from anchor to anchor normally spaced at 5 spans with5 tangent towe...

Stringing of ground conductor for plain terrain For shut down works 50% more than the rates of the work.

Dismantling of 66kV D/C A Type Tower Without Stub 1 Nos.

Excavation for foundation including Back filling, levelling of consolidation Fully Sub Merged soil. Updated Rate

Concreting and curing M15 1:2:4

Concreting and curing 1 : 3 : 6

Steel reinforcement including material and labour

Back filling and levelling with available soil.

Tower Protection Work: Earth work excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not e...

Tower Protection Work: Providing and laying in position plain cement concrete of nominal mix 1:4:8 using 40mm and down size graded granite metal, machine mixed, concrete laid in layers not exceeding 1...

Tower Protection Work: Providing and constructing granite / trap / basalt size stone masonry in foundation cement mortar 1:6, stone hammered dressed in courses not less than 20cms high, bond stones at...

Tower Protection Work: Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggreg...

Tower Protection Work:Providing ruled pointing to coursed stone masonry with cement mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining including cost of materials, labour, curin...

Tower Protection Work: Providing 20mm thick cement plaster in single coat with cement mortar 1:6, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering,...

Tower Protection Work: Filling available excavated earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming aft...

Tower Protection Work:Disposal of surplus earth/ rock to the areas directed/ notified areas of disposal point of the local bodies including all lead and lift charges, loading and unloading etc., compl...