Loading…
Loading…
Tender Value
₹3.3 L
EMD Value
₹4,100
Closing Date
2 Jul 2026, 10:30 pm5d left
Similar tender results from the same govt authority in the past 3 years.
Minor Irrigation Department
Providing irrigation facilities through borewells to the lands of Thayamma w/o Giriyabhovi of K.B.Palya village, Halekote Hobli, Holenarasipura Taluk, Hassan Dist.(Reserved to SC)
307737
MI/2026-27/OW/WORK_INDENT12134
Reserved
Other Works
Minor Irrigation Division Hassan
9 documents required · 9 mandatory
₹500
₹4,100
18 Jun 2026
18 Jun 2026
30 Jun 2026
Providing irrigation facilities through borewells to the lands of Thayamma w/o Giriyabhovi of K.B.Palya village, Halekote Hobli, Holenarasipura Taluk, Hassan Dist.(Reserved to SC)
Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. - 63 A ---- etc., complete with all leads and lifts as per standard specific...
Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. ---- etc., complete with all leads and lifts as per standard specifications and directions of the Engineer in-...
Supplying, fixing and wiring 0 to 30A Direct Reading AC analog type Ammeter. ---- etc., complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the...
Supplying, fixing and wiring rotary selector switch suitable for Voltmeter. ---- etc., complete with all leads and lifts as per standard specifications and directions of the Engineer in-charge of the ...
Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...
Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for - 50 mm dia GI elbow ---- etc., complete with all leads and lift...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. - Size 50 mm ---- etc., complete with all leads and lifts as per ...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw1_bid_document- 12134.doc
Tender Document • 0.39 MB
INSTRUCTION TO TENDERES.zip
Instructions to Tenderers • 6.71 MB
Download all tender documents and submit your bid