8404 REPAIR REPLACEMENT OF AC SHEETS, ROOF TREATMENT AND OTHER CONNECTED WKS AT MD ACCN C AND D ZONE UNDER AGE BR II OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site etc complete all as specified and as directed

M&L for rendering 10 mm thick on concrete surfaces of ceiling/Chajja/Facia of chajja etc in cement morter 1:3 finished even and smooth without using extra cement up to 10 mtr hight complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed

M & L for Vitrified Ceramic Tiles (Light Shade) 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M & L for Vitrified Ceramic Tiles (Light Shade) 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in vertical surfaces, dado, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M & L for Non skid ceramic tiles (colored) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M & L for Non skid ceramic tiles (colored) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting / Vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M & L for Non skid ceramic tiles (colored) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting / Vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M&L Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and and as directed

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed

M&L for granite (of any type) stone slab 16 to 18mm thick (table rubbed and polished), in skirting, Kitchen platform /dado etc laid over cement screed bed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed

Dimantling of Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed

S&F Pre- painted galvatume aluminum zinc coating GI based trapezoidal steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in-Chage.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in-Chage.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed

S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins, Gusset plate and base plates, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-410-Wgde -E-250) quality 'B' includng welding or riveting etc complete all as specified and as directed

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specified and as directed

S&F Hard drawn steel wire fabric in available size weight not exc 4.00 Kg /sqm fixed in tank caging including welding, riveting, framing etc complete all as specified and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation oards/slabs/ blankets, any thickness including cover fillets etc complete all as specified and as directed

S&F Decorated PVC False ceiling of size 600mmX600mmX5 mm thick, used as a panel insert in a frame work made using powder coated GI T-section of size 25mmX25mm in square pattern of grid size 600mmX600mm. The GI frame work is supported from the ceiling with the help of J Hook and 4 mm GI wire of required size to maintain the proper levels etc. The aluminum frame work is supported on side wall with the use of aluminum L section of size 25mmX25mm angle complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc complete all as specified and as directed

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete etc complete all as specified and as directed

S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast and filling of pressed steel chowkat ietc complete all as specified and as directed

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed

S&fixed 2nd class hard wood 30 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed

S F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly all as specified and directed by EIC.

S&F 18/19 mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specifirf and as directed.

M&L 19/20mm thick Pre laminated exterior grade both sides laminated with decorative choice laminations fixed with screw to timber frame as in cupboard shutter, shelve, kitchen cabinet etc complete all as specified and as directed

S&F pvc door frame of size 50 x 47 mm with a wall thickness of 5 mm (+0.25mm) Density 600 Kg/Cbm manufactured by a ISO-9001-2015 certificate company , made out of single piece extruded PVC Foam profile, with mitred cut joints and joints with 2 nos of bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, or fusion heat welding process, the vertical door profiles to be reinforced with 33 x 17mm M.S rectangle tube of 19 Guage. The door frame to be fixed to be wall using 8 x 100 mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer-in-charge

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile, with 2,4 or 6 raised panel design with 2mm thick Molded PVC Sheet on the front Face & 2mm Plan color PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and as directed.

S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be approved by Garrison Engineer as in frame , shutters for Door/Windows / Ventilators, fixed/openable/sliding or any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass and stainless steel wirecloth, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed. Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment. (ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wirecloth shall be measured and paid separately under respective items. (iii) The accessories (Aluminium mongries etc) required to be provided for window, vents and doors as per directions of Engineer-in-chargeshall be provided but weight for the same shall not be considered and no extra cost will be paid.

S&F Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded as specified as directed.

S&F Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bar, dovetailed or welded as specified as directed.

S&F for Steel ventilators with top hung shutter including hinges, steel peg stay, complete.

Making good steel/aluminium windows/doors Z section/steel gates by taking down and refixing including cutting/welding if required and made good to smooth functioning including replace of minor fittings (hinges, handle, stay etc.) of the window complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds,glazed with putty or fixed with beads

S&F 3 mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty insquare not exc. 0.5 sqm in each pane.

S&F 4 mm thick figured glass pin headed type and glazing with oil putty in square not exc 0.5 Sqm in each pane.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F Aluminium anodised tower bolt 150 mm long of extruded section etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S&F 100 mm thick butt hinges, heavy weight, stainless steel and fixed etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed

M&L for brick work with fly ash brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and as directed

M&L for brick work with fly ash Bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed

All as per item No 61 above but 20 mm dia bore

All as per item No 61 above but 25 or 32 mm dia bore

S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed

All as per item no 64 above but 20 mm dia bore pipes (without concealed)

All as per item no 64 above but 25 mm dia bore pipes (with out concealed)

Disconnecting existing water tank, setting aside(or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and fixing in position etc exc 250 ltrs and n.exc 500 ltrs all as specified.

Dismantling water tanks exc 250 ltr but not exc 500 ltr and removing to store etc complete all as specified and as directed

S&F rotational moulded PVC water storage tank 500ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and as directed

S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) etc complete all as specified and as directed

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed

S&F in repairs coloured vitreous china wash down water closet (anglo-indian type) Semi Pedestal Pattern white (excluding flushing cistern & flush pipe) incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed CAT No CNS-WHT-551SN Make- JAQUAR/ and equivalant

Vitreous china coloured wash down water closet pan (Padestal Pattern), ( in repair), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), and making good to dismantled/damaged tiling floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china squatting pan 'Orrisa' patterns of size 580mm x 440mm white, (excluding flushing cisterns and flush pipe), including brass chromium plated trap 'P' or 'S' pattern with inlet and outlet integral foot rests, complete all as specified

S&F in repair counter top wash hand basin white flat of size 545X545X180mm excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed.

S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all as specified and as directed

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed

Taking down PVC rain water pipes ( any size or pattern) including all fittings head shoes etc complete all as specified and as directed

S & F 110 mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified

S & F in repair 110 mm dia PVC (SWR)bends with rubber rings joints fixed as required complete all as specified and as directed

S&F in repair for 75 mm bore out let pvc floor trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed

S&F in repairs stainless steel decorative curtain rod of 25 mm bore complete all as specified and as directed

S&F in repairs stainless steel decorative curtain brakets and end cap complete all as specified and as directed

S & F 50 mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified

S&F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed

All as per item No 90 above but tap 2 in 1 of 15mm bore complete all as specified and as directed. (Make : Marc or equivalent)

S&F in repair stop valves /angle valves fancy type chromium plated brass cast copper (Concealed type) alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

S&F as in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed

S&F in repair wall mixture with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wal flange of 15mm bore etc complete all as specified and as directed.

S&F in repair sink mixture with swinging casted spout ( wall mounted model with connecting legs and wall flanges of 15 mm bore etc complete all as specified and as directed.

S&F repair centre whole bassin mixture without popup waste system with 450mm long bradied hoses of 15mm bore etc complete all as specified and as directed CAT NO FLR- 5167NB Make Jaquar or equivalent.

S&F repair towel ring round with round flanges etc complete all as specified and as directed .

S&F in repair glass shelf 600 mm long etc complete all as specified and as directed.

S&F in repair hand shower (Health Faucet) ABS Body with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as specifed and as directed.

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed.

Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing WPT felt beyond the MOD premises etc complete all as specified and as directed

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

Supply only water proofing compound (Liquid) complete all as specified and as directed.

M&L for brushing neat cement slurry with 3.00 kg of cement per Sqm over roof surfaces and sunken floor etc, providing 20mm thick plastering in cement mortar 1:4 mixed with liquid water proofing compound, finished even and smooth complete all as specified and as directed. Note: Supply only water proofing compound shall be measured and paid seperately.

M&L cement concrete 1:5:10 type E-2 using 20mm granded brick aggregates as in sunken portion of WC etc complete all as specified and as directed

M&L for applying and evently bituminous tack coat @ 1.20 Kg/Sqm of industerial bitumen blinded with 0.006 cum of course sand per sqm on the surfaces of sunken floor complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C1 using 20 mm graded stone aggregate for plinth protection, Sub base of flooring fair finished etc complete all as specified and as directed

Demolation of Cement concrete of any description and any position like roof padding etc. not otherwise specially provided for.

M&L for rendering 15 mm thick in CM (1:3) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Application of waterproofing Coating : Providing and applying Fostoc Brushbond Roof Guard, a single component High build fibre Reinforced Acrylic Waterproofing render for roofing system to be applied by brush, at three coats at minimum dry film thickness of 1 mm, which should cure by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. Solid Content - 70%, Tensile strength ASTM D 412-1.10 Mpa, Elongation ASTM D12-100%, Resistance to ageing due to - 1000hours, UV radiation ASTM D4587 E - No Change, Rapid Chloride Penetration ASTM c 1202 - Very low, Pull off adhesion ASTM D541 - 0.92 Mpa, Resistance to Algae growth ASTM D 5589-97 - Passes, Zero rating, Permeability (mm) (BSEN 12390 part 8) -n 5.0, Water vapour transmission (ASTM E 96) - 6.0g/m2 h

M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

M&L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for preparing new plastered surface of ceiling surface and applying two coats of white wash etc complete all as specified and as directed

M&L for applying one coat of white washing (Lime wash white) on ceiling surfaces including preparation of old decorated plastered /unplastered surface of ceiling by brooming down,scrapping cleaning & removing down smoke soot, moulds, moss and efflorescence etc complete all as specified and directed.

M&L for applying one coat of white washing on wall (Lime wash white) including prepration of old decorated plastered/ unplastered surface of walls by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete all as specified and directed

M&L for preparation of ld decorated plastered surfaces of wall by Vacuum based sanding machine removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (mutypurpose mixer shall be used for uniform and proper mixing of putty) and applying one coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm/litre and UV resitance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10Sqm over including priming coat of exterior primer applied @ 0.90 litre/10 sqm over prepared surfaces completed all as specified an directed. Note:- Acrylic Emulsion paint/emulsion distemper/plastic emulsion paint Refer sch A item No 16,17 painting methodogy using preparation of old decorated plastered surfaces of wall shall be carried out through Vacuum based sanding machine for scraping etc after preparation of surface wall care putty uupto 1m thick as required shall be carried out as specifiefd under Schedule A notes of SSR Part-I (multipurpose mixer shall be used for uniform and proper mixing of putty) then one coat of primer same make of paint and base shall be provided on wall/ceiling by normal manner as mentioned in SSR part-I finally the Acrylic emulsion paint/emulsion distemper/Plastic emulsion paint through Air lesss spray by using auto roller shall be carried out make of paint of tools shall be one of the Berger/Asian/TEchno commercial Equivalent shall be used as approved by GE/AGE. All work shall be carried out through approved applicator of manfacturer of paint only. The same shall be approved before carried out the work from GE/AGE.

M&L for applying one coat of oil emulsion distemoer (oil bound distemper) of any tint including preparation of surfaces of walls on old decorated plastered/unplastered surfaces by washing/rubbing down and scrapping old loose material,smoke,soot,moulds,moss and efflorence etc including filling and stopping the rough surface/nail holes with white cement/POP/wall putty complete all as specified and directed.

All as per item No 128 here-in -before but two coats of distemper oil emulsion.

M&L for 2 coat of wall care putty on wall including preparation of surface with sand paper etc. to obtain smooth surface complete all as specified and as directed

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed

M&L for preparing Old plastered surface of wall and applying two coat of cement base paint by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete removal of Existing treatment all as specified and directed

M&L for preparing Old plastered surface of wall and applying one coat of cement base paint by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete removal of Existing treatment all as specified and directed

M&L for applying one coat of exterior emulsion weather coat paint including preparation of old decorated surface of wall by washing/rubbing down and stopping of /filling nail holes /rough surfaces with putty/plaster of paris complete all as specified and directed.

M&L for applying one coat of colour washing (Lime wash white) including prepration of old decorated plastered/ unplastered surface of walls by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete all as specified and directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position like trusses, rafters, purlins etc.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 53,777.60 (refer Tender Srl Page No 43). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/S G D CONSTRUCTION

PRADIP KUMAR BOSE

MUKHERJEE ENTERPRISE

M/S SANKAR BHATTACHARYA

M/S DUTTA CONSTRUCTION CO

M/S LOKENATH ENTERPRISE

Paritosh Saha