Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹12,000
Closing Date
5 Oct 2026, 10:00 amClosed
Executive Engineer/PWD/APDD
Executive Engineer, PWD, Alipurduar Division.
Seating arrangements of litigants on each floor (Floor no. 01 to 05) by SS 304 2 seater and 3 seater tandem seating at waiting lobby in the (G plus 6) integrated Court complex of the Judgeship of Alipurduar.
2026_WBPWD_5020068_1
WBPWD/EE/APDD/NIEQ 27 of 2026-27
Open Tender
CIVIL WORKS
Item Rate
60 days
Alipurduar Court
Please refer Tender documents.
3 documents required · 3 mandatory
₹12,000
14 Oct 2026
29 Aug 2026
7 Oct 2026
29 Aug 2026
5 Oct 2026
29 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1SS 304 Two- and Three-Seater Tandem Seating System:- Supply, installation and floor fixing of Indian-manufactured, heavy-duty two- and three seater tandem seating units conforming to the following specifications: The entire seating system, including the seat, backrest, main frame, supporting legs, armrests and structural members, shall be fabricated from SS 304-grade stainless steel. Seat and backrest panels shall be manufactured from minimum 1.2 mm thick perforated SS 304 stainless-steel sheets. The main load-bearing structural frame shall be fabricated from minimum 1.5 mm thick SS 304 robust stainless-steel sheet, suitably formed and reinforced for heavy-duty use. Supporting legs shall be reinforced with SS 304-grade stainless-steel flats of minimum 6 mm × 32 mm section. Each three-seater unit shall be provided with four armrests fabricated from SS 304-grade capsule-section hollow tubing of 32 mm × 12 mm and each two-seater unit shall be provided with three armrests fabricated from SS 304-grade capsule-section hollow tubing of 32 mm × 12 mm. All exposed stainless-steel surfaces shall be uniformly finished with a brushed hairline/satin finish. No powder coating or paint shall be applied to any component. The finished seat height from floor level shall be 16 inches (approximately 406 mm) and top of backrest from floor is 775 mm approximately. The legs shall be fitted with SS 304-grade adjustable levelling feet with suitable non-slip base pads to compensate for minor variations in floor level. All nuts, bolts, washers and fastening hardware shall be manufactured from SS 304-grade stainless steel and shall be of Allen-key-operated socket-head type. Welding shall be carried out using a suitable stainless-steel welding process. All welded joints shall be properly ground, buffed and finished to provide a smooth, clean and seamless appearance. The minimum net weight of each complete three-seater unit shall not be less than 37 kg and for 2 seater shall not be less than 27 kg. The tandem seating units shall be supplied complete with SS 304-grade floor-fixing fasteners and installed securely in proper alignment at the designated location. | |||||
| 1.01 | 3 seater SS 304 tandem seating chairs (180 cm x 71 cm x 77.5 cm) | 20 | Nos. | - | - |
| 1.02 | 2 seater SS 304 tandem seating chairs (120 cm x 71 cm x 77.5 cm) | 20 | Nos. | - | - |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 1.07 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.38 MB
Tendernotice_2.pdf
PDF • 1.20 MB
BOQ_5093901.xls
BOQ • 0.23 MB
2026_1685_Time_Extension_NIEQ_27_26_27.pdf
PDF • 0.61 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .