PROVISION OF CERTAIN MISCELLANEOUS B/R AND E/M WORKS AT AFS AMLA

Amount

Demolition of cement concrete as in ground floor and paving not exc 15 cm thickness below or above GL (unreinforced concrete) including disposing off derbis complete all as directed.

Demolition of stone masonry/Precast concrete block walling or precast concrete articles built in cement mortar of any description including removing rubbish off the premises.

Surface dressing not exceeding 15 cm deep in soft/loose soil all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/loose soil all as specified and directed.

Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil all as specified and directed.

Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth; for foundations etc, or for shafts, wells, cesspits, mahnoles, pier holes etc. not exc. 10 Sqm on plan and n.exc 1.5 metre in depth and getting out in soft/loose soil all as specified and directed.

All as per Item No.6 here in above but exc 1.5 mtr and not exc 3 mtr in depth, in soft/loose soil for foundations etc., and getting out complete all as specified and directed.

Excavating in post holes each n exc 0.5 cum and getting out in soft / loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus spoil to a distance n. exc 50m and making good surface complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25 cm each in any type of soil all as specified and directed.

Forming embankment including raising or lowering earth spreading in layers n. exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n. exc. 1.5 m high from base.

Removing surplus excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all as directed.

Supply and loose filling with burnt broken bricks aggregates of gauge 80 mm to 150 mm in size as a filtering media for filter bed/soakage pit all as specified and directed.

Material and labour for hardcore of broken stone; gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. Note: For payment purpose only, consolidated thickness will be measured & paid

Material and labour for Plain Cement Concrete (PCC) 1:4:8 type D-2, using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C0 using 12.5mm graded stone aggregate as in filling of pressed steel frame of door, window and like complete all as specified and as directed.

Material and labour for Plain Cement Concrete (PCC) 1:3:6 type C-2, using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for Plain Cement Concrete (PCC) 1:3:6 type C-2, using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Material and labour for plain cement concrete (PCC) 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping and the like including necessary form work etc., complete all as specified and directed.

Material and labour for Plain Cement Concrete (PCC) 1:2:4 type B-1, using 20mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for Plain Cement Concrete (PCC) 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping, hold fast, bond stone and the like including form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Material and labour for Plain Cement Concrete (PCC) 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in benching including finishing the surfaces even and smooth using extra cement complete all as specified and directed.

Material and labour for 100mm thick Plain Cement Concrete (PCC) 1:2:4 type B-1 using 20mm graded stone aggregate as in sub-floors, surface finished even and smooth without using extra cement including necessary form work/screed strips complete all as specified and directed.

Material and labour for 75mm thick Plain Cement Concrete (PCC) 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth production, surface finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

Material and labour for 75mm thick Plain Cement Concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub-floors including necessary form work complete all as specified and directed.

M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 100 thickness of concrete slab.

Material and labour for providing Precast Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate set in cement mortar 1:4 as in cover slab (for man holes, drainage cover etc.,) and similar articles with plain faces including formwork and placing at site complete all as specified and directed.

Material and labour for Reinforced Cement Concrete (RCC) 1: 1½ : 3 type B-1 using 20 mm graded stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for extra forming fair finished drain or channels 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped end etc., all as specified and directed.

Material and labour for brick work with fly ash bricks (modular size bricks), straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:4 and external face of brick work pointed flush in the same mortar, as the work proceeds, complete all as specified and directed.

Material and labour for brick work with fly ash bricks (modular size bricks), straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 and external face of brick work pointed flush in the same mortar, as the work proceeds, complete all as specified and directed.

Material and labour for brick work with fly ash bricks (modular size bricks), straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 and external face of brick work pointed flush in the same mortar, as the work proceeds, complete all as specified and directed.

Material and labour for cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as directed.

Material and labour for forming jambs, etc. to openings in cement mortar 1:6 (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed.

M&L for cutting holes in brick walls exceeding half brick but not exceeding one brick thick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

M&L for random rubble stone masonry uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L for formwork to soffits of suspended slab such as roof slab, floor slab landings and similar work; for slab thickness not exceeding 200 mm complete all as specified and directed.

Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as directed.

Taking down chowkats or frames with shutters exceeding 1.5 Sq.m but not exceeding 4.0 Sq.m each (without taking off shutter from the frame) complete all as directed.

Taking down steel frames with steel shutters of size exceeding 1.5 Sq.m but not exceeding 4.0 Sq.m each (without taking off shutter from the frame) and refixing in other opening within a lead of 50m complete all as directed.

Taking down aluminium door with its frame of size exceeding 1.5 Sq.m but not exceeding 4.0 Sq.m each (without taking off shutter from the frame) and refixing the same after proper adjustment and repair required including cutting of Aluminium frame or glass for refixing another opening complete all as specified and directed

Supply and fix second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick factory made second class hard wood rail and style plain framed panelled shutter (any number of panels) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The Size of rail and stile as per IS 1003 (part-I), kiln seasoned and chemically pressure treated and fitted to chowkats complete all as specified and directed.

Supply and fix 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side all as specified and directed.

Material and labour for second class hardwood plain fillets exceeding 13 sq.cm & not exceeding 25 sq.cm in section, shape of section shall be square, rectangular or triangular, clean sawn, secured with nails or brads complete all as specified and directed.

Material and labour for second class hardwood plain fillets exceeding 6 sq.cm & not exceeding 13 sq.cm in section, shape of section shall be square, rectangular or triangular with bullnosed, splayed, chamfered or rounded on one edge or face, clean sawn, secured with nails or brads complete all as specified and directed.

Supply and fix 100 mm long aluminium anodised, barrel tower bolts of extruded section fixed with stainless steel screws complete all as specified and directed.

Supply and fix 150 mm long aluminium anodised, barrel tower bolts of extruded section fixed with stainless steel screws complete all as specified and directed.

Supply and fix 200 mm long aluminium anodised, barrel tower bolts of extruded section fixed with stainless steel screws complete all as specified and directed.

Supply and fix 150 mm size aluminium handles, cast type, anodised fixed with stainless steel screws complete all as specified and directed.

Supply and fix Aluminium alloy, anodised, sliding door bolt of length 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 100 mm size mild steel cold rolled, heavy butt hinges fixed with stainless steel screws (or) by welding complete all as specified and directed.

Supply and fix 125mm long size extruded aluminium handles, cast type anodised complete all as specified and directed.

Supply and fix 4-lever, 100mm size brass mortice lock, vertical type, fixed with necessary SS/brass screws/bolt complete all as specified and directed.

Supply and fix brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges all as specified.

Supply and fix Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor suitable for overall length of cover plate 140mm complete all as specified and directed.

Supply and fix Aluminium (Die cast) body door closer, hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg complete all as specified and directed.

Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F 0.63 mm thick mild steel, plain, black sheet as in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

Supply and fix mild steel TMT bar 10mm dia and over, as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

Supply and fix mild steel TMT bar 6mm to 8mm dia, as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Supply and fix Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W (Gde- E- 250) quality-A all as specified and directed.

Supply and fix mild steel framed work using tubular pipe as in purlines/ post/ rafter and the like including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to I.S-1161-1979 grade St.-240 all as specified and directed.

S&F Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete steel conforming to Fe -410-W (Gde-E-250) quality- B all as specified and directed.

S&F Steel ventilators with top hung shutters including hinges, steel peg stay, complete all as specified and directed.

Supply and fixing pressed steel frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified and directed.

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed. Note: Minimum thickness of powder coating shall not be less than 50 microns.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos (150mm size) in each door, SS hinges (100mm size), 4 lever brass Godrej concealed lock 1 No (100mm size), powder coated aluminum snap beading screws etc. complete all as specified and directed.

Supply and fix powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F aluminium window grills fixed with suitable guide channels and approved pattern as per directed by Engineer-in-Charge including necessary jointing cleats, glazing clips, aluminium snap beading, screws etc. complete all as specified.

Supply and fix powder coated GI snap grid of size 605mm x 605mm for false ceiling with using GI sections of size 19mm x19mmx 0.5mm as a wall angle fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, 32mm x 24mm x 0.5mm as a Main Tees, 25mm x 27mm x 0.5mm as a Cross Tees including 4mm dia GI hangers upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all specified and as directed.

Supply & fix 4 mm thick non asbestos fiber cement building boards of size 600mm x 600 mm fixed/ inserted to GI/aluminium frame work complete all as specified and directed. Note:- Fiber cement building board provided by contractor shall conform to IS : 14862

Supply and fix mild steel hold fasts and similar small articles made using flat, round or square bars conforming to Fe-290 Gde-E-165 all as specified.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based multirib steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa, multirib TM profile with maximum pitch of 250 mm c/c and minimum 28 mm crest depth as in roof covering/cladding to wall, fixed with self tapping screws including providing crimp at eaves level shape of crimp complete all as specified and directed. Note:- The rate quoted by the contractor deemed to be includes provision of end flashing and no extra payment is entertained on this account.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa, as in ridge covering, cladding to wall and the like fixed with self tapping screws complete all as specified and directed.

M&L for 4mm thick asbestos cement plain building boards, fixed to timber framework with screws in ceiling all as specified as directed.

M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed in aluminium frame with necessary beading complete all as specified and directed.

M & L machine cut granite stone(any type) 15 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with grey cement slurry mixed with pigment to match the shade of the stone including rubbing and polishing and rounding of edges as required complete up to deserid finish as directed.

Material and labour for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 and the surface finished fair and even to receive wall tiles complete all as specified and as directed.

S&F coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

Material and labour for screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 for laying floor tiles etc complete all as specified and directed.

S&F Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

All as per item No 83 above but for work on vertical surfaces such as skirtings, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S&F Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade without pigment complete all as specified and directed.

Material and labour for dry sand filling under, PCC floor tiles, paver block and the like including consolidation complete all as specified and directed. Note:- For payment purpose only punned thickness of sand will be measured & paid.

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and surface finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and surface finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and surface finished even and smooth without using extra cement complete all as specified and directed.

Blank

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and surface finished fair and even complete all as specified and directed.

Material and labour for rendering 15 mm thick on stone masonry surface or surface other than fair face of brickworks in cement mortar 1:4 and surface finished fair and even complete all as specified and directed.

M&L for raking out joints/ pointing to stone masonry wall built in cement or cement lime mortar including disposing debris off the premises complete all as specified and directed.

M&L for flush pointing on stone masonry wall of traverse in cement mortar 1:4 complete all as specified and as directed

Material and labour for two coat of interior oil bound distemper paint on newly plastered surfaces of walls over a coat chalk whitening primer including necessary preparation of surface complete all as specified and as directed.

Material and labour for two coat of interior oil bound distemper paint over 3mm thick wall care putty on old decorated surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., including complete removal of existing treatment all as specified and as directed.

Material and labour for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Material & labour for preparation of newly plastered surface of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and directed.

Material & Labour for complete removal existing treatment of old decorative surface of walls (i.e. white wash, colour wash, cement base paint, synthetic enamel paint etc.) and applying two coats of distemper oil emulsion over a coat of primer, including removing of unnecessary nails, making good holes, cracks, etc., with lime putty or Plaster of Paris to make the surface smooth wherever necessary complete all as specified and directed.

Material & Labour for preparation of newly plastered surfaces of walls and applying applying two coats of cement base paint over a coat cement primer complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified.

Supply and fix 5 mm thick sheet glass, ordinary quality and glazing with suitable aluminium joining cleats, glazing clips etc., in square exceeding 0.5 sqm in each pane complete all as specified and directed. Note: S&F aluminium cleats/glazing clips will be measured and paid separately under relevant item of BOQ.

Blank

Blank

Material and labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat red oxide primer on new or untreated steel surfaces of any description over 10cm width or girth including necesssary preparation of surfaces complete all as specified and directed.

Supply and lay light grade GI tube 50 mm dia with all fittings in trenches complete all as specified and directed.

Supplying & laying in trenches Galvanised steel water tubes, ISI marked, medium grade with all fittings complete all as specified for the following sizes :-

15 mm Bore

20 mm Bore

25 mm Bore

Supply and fix Steel tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors for the following sizes:-

15 mm Bore

20 mm Bore

Supply and fix 15 mm dia chromium plated fancy type bib taps; cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified directed.

S&F 15mm dia pillar taps, cast copper alloy with capstan heads chromium plated; screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

S&F 15 mm dia stop valve, cast copper alloy, screwd down, high pressure, with cruth or butterfly handle, screwd both end for iron pipe or for unions and fixed all as specified and directed.

S&F 15 mm dia stop valve, fancy type, chromium plated, cast copper alloy, screwd down, high pressure, with cruth or butterfly handle, screwd both end for iron pipe or for unions and fixed all as specified and directed.

S&F 15 mm dia stop valve/ angle valve fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwd down, high pressure, with cruth or butterfly handle, screwd both end for iron pipe or for unions and fixed all as specified and directed.

Supply and fix Gun-metal gate valves, with iron wheel head, screwed both ends suitable for 25mm bore iron pipe complete all as specified and directed.

S&F 32mm size, waste fitting, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

S&F Waste coupling of PTMT (half or full threaded) suitable for 40mm bore dia of discharge pipe all as specified and directed. Note: The weight of waste coupling provided shall not be lesser than 60gms.

S&F Grating dome of size 125 mm dia of with waste hole of PTMT (Minimum weight 40 gms)

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) all as specified and as directed

M&L for 150mm dia bore Salt-glazed stoneware drain pipes laid in trenches and jointed all as specified and directed.

M&L Plain cement concrete (PCC) 1:3:6 type C2 using 40 mm graded stone aggregate as a concrete bed to drain pipes including packing under and haunching against sides of 150mm bore dia stoneware pipes after they are laid and tested complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed.

S&F 110mm dia bore PVC (SWR) bends any radius with access door.

S&F 110mm dia bore PVC (SWR) bends any radius.

M&L PVC (SWR) floor trap suitable for 75mm dia of outlet pipe, plain with grating including jointing with solvent cement.

M&L PVC (SWR) gully trap 125/110 mm, setting and joining with solvent cement.

Supply & fix Vitreous China wash down water closet pan (Pedestal pattern) with 'P' or 'S' trap, white, including seat & cover, provision of fixing bolts and connecting up to drain and flushing pipe etc., complete, all as specified and as directed.

S&F in repairs, vitreous china bowl urinal flat back, size of 465 X 355 X 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including and providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 550x400mm with brackets including cutting for pinning in ends of brackets all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 580x450mm with brackets including cutting for pinning in ends of brackets all as specified and directed.

S&F PVC health faucet (hygiene shower) for EWC with 1 metre shower hose complete all as specified.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm all as specified.

Supply & fix in repairs PVC low level flushing cistern complete with syphonic action type 10 Ltr capacity including flange valve handle, bracket, PVC flush down pipe dia as required with bend all as specified and directed.

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

Supply lay & testing 3.5 Core 95 Sq.mm cable, XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, laid in trenches/passing through pipe/duct or fixed to wall/pole etc., and connecting up complete all as specified and directed.

Material and labour for making hole in existing wall for exhaust fan of size 300mm diametre including making good the disturbed surface by using cement mortar 1:4 and painting with matching colour as per existing complete all as specified and directed.

Supply and fix of Exhaust fan, PVC body, size 300 mm, Single phase, 230 Volts including providing flexible copper cable from ceiling rose to connector of fan complete all as directed by Engineer-in-Charge. (Make:- Bajaj Maxima DxI 300 mm White Dom of Bajaj or equivalant in Havells / crompton)

Material and labour for point wiring using approved colour coding as per IS with 1.5 sqmm two single core PVC insulated but unsheathed FR cable, 1100 volts grade, ISI-694 marked with multistranded copper conductor and earth continuity wire with similar 1.5 Sqmm cable (including connecting to earth dolly) drawn through ISI Marked heavy duty rigid PVC concealed conduit with all accessories etc with mild steel sunken box duly,concealed in wall and having PVC modular cover plate with frame suitable for One Fan point controlled by one No one way switch

Supply and fix modular switch 01 way, 1 module complete all as specified.

Supply and fix air termination single pointed aluminium rod not less than 12mm dia and 300mm long end threaded all as specified and as directed.

Supply & fix MCCB 160 Amp, Breaking capacity 16 KA, 415 Volts, 4 pole with thermal magnetic release complete all as specified and directed.

M&L in replacement for test point terminal block made of gun metal or phosphorus bronze size 75 X 75 X 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hex head screw and connected to Copper/ Aluminium / GI strips complete housed in a PVC junction box all as specified and directed. Note :- 1. The test points wil be properly fixed on epoxy insulators. 2. Epoxy insulators will be measured and paid seperately under relevant items.

M&L for plate earthing for complete with galvanised mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI strip 32x6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of equipments etc at the other end , earth strip encased in and including 40 mm bore GI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25 x 4 mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe light grade from bottom of earth pit to top of electrode complete with wire mesh , funnel and earth pit in PCC 1:2:4 type B-O using 12.5 mm graded crushed stone aggregate and having CI Cover 10mm thick with lifting handle over CI frame complete all specified and shown in electrical plate No -3 of SSR Pt-I. Note :- (a) Rates for Excavation and earthwork in any type of soil/strata, testing on completion, GI strip 32x6 mm, 20mm dia and 40 mm dia pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. (b) On testing, after completion, if the earth resistance lessthan 5 ohms is not obtained, earthing will be rejuvenated at no extra cost till the desired earth resistance is obtained.

Supply and fixing earth continuity conductor or main earthing lead fixed to wall on batten/porcelain/epoxy insulators or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc.connected upto test terminal point etc complete including fixing with saddles and screws for fixing porcelain/epoxy insulators/conduit/pipe , all as specified and directed for the following type of conductors :- Note : - Insulators/conduit/pipe shall be measured and paid separately under appropriate items of BOQ

Aluminium strip of size 25 x 4 mm

Galvanised iron strip of size 32x6 mm

Supply and fix ready made type PVC Junction box IP 65 of size 200 mm x 160 mm x 98 mm having shutter & lifting knob with provision of earthing strip entry glands complete all as specified directed and fixed the box on wall/poles with suitable size of nut, bolts and washers complete all as specified and as directed by Engineer-in-Charge (Cat Part no K9250 of make Hensel or Equivalant in Sintex)

M&L for PCC block (300mm x 300mm x 300mm) 1:3:6 type B-1 (using 20 mm graded stone aggregate) with duly grouted MS bolt of suitable size to fix the Aluminium strip with nut & washers for AL AT rod stand post on roof including necessary formwork complete all as specified and as directed.

Supply and fix post insulator cetrally threaded epoxy LV type suitable for holding threaded aluminium/ copper AT rod 12 mm dia fixed on stand post including screw complete all as specified and as directed.

Supply and lay in trenches/ fixed to walls PVC super quality pipe not less than 40 mm dia class 3 grade for protection of earth strip complete fixing with suitable clamps at 0.5 M span all as specified and as directed. (Make Finolex or equivalant) NOTE :- Rates for flat iron clamps, bolts, nuts and washer etc are deemed to be included in rate quoted.

Supply and fix (HDPE) DWC pipe of size 80mm (outer dia) for LT cable protection including sockets, bends etc., complete all as specified and as directed. Make:- Gemini or equivalent as approved by GE

M/s R K Narware