Comprehensive maintenance and Repairs Replacement of spares of Electrical lifts installed at CGSD Royapuram and 308 MIG Flats Ayapakkam Chennai and EOT HOT cranes electrically operated hanger door at ICGAS Meenabakkam and BMU Chennai under GE(I)(C

Amount

SCHEDULE 'A' - PART I (MAINTENANCE)

Comprehensive maintenance and repairs including renewal/ replacement of defective parts including Automatic Rescue Device (ARD) of electrically operated goods lift make OTIS Lifts with a capacity of 2000 Kgs for 3 stops/ 3 landings 0.50 M/Sec speed Thyristoried dual push button control system service ground floor and two upper floors installed at Coast Guard Royapuram Store Depot Chennai (Royapuram Store Depot). (01 No Lift) Serial No/SM MES No: MES 850/7013- LF/1/05, MES 850/7013LF/EM-1/05

Comprehensive maintenance and repairs including renewal/ replacement of defective parts including Automatic Rescue Device (ARD) and Over Load Warning Device (OLWD) at Bldg Nos - 52,53,54,55,56 and 57 where available of electrically operated passenger lift make M/s KONE ELEVATORS with a capacity of 6 passengers 544 Kgs for 5 stops / 5 landings, 1.0 M/Sec per single speed single push button control system with micro processor control system (308 Flats Ayapakkam ) ( 12 No lifts) ground floor and four upper floors. Serial No/SM No : (i)Building No 52 (A): 44027908 and 52 (B) : 44027909= 02 Nos (ii)Building No 53 (A): 44027910 and 53 (B) : 44027911= 02 Nos (iii)Building No 54 (A): 44027912 and 54 (B) : 44027913= 02 Nos (iv)Building No 55 (A): 44027971 and 55 (B) : 44027972= 02 Nos (v)Building No 56 (A): 44027973and 53 (B) : 44027974= 02 Nos (vi)Building No 57 (A): 44027975 and 57 (B) : 44027976= 02 Nos

Note for item No 2 to 2.01 : (i) The spares/electrical items as listed in Sch 'A' will be used whenever required only and measured and paid separately under respective items. (ii) The rate is inclusive of all items as required at site except those items as given in supply only to keep the lift operational round the clock including cleaning and greasing all moving parts on monthly basis complete all as specified and as directed by Engineer-in-Charge. (iii) If spare parts of original make is not available in market necessary suitable spare equivalent to existing lift part as approved by GE shall be used in the work so that to run the lift with smooth functioning. (iv) Cost of renewal of lift license is deemed to be included in the quoted rate .

(v) Quoted rate incl the testing of all the lifts by licensed Lift Inspector of tamil nadu twice in contract period for saftey.Certificate issued by the licensed lift inspector shall be submitted to Eng-in-charge. (vi) In case of any of the lift/lifts is/are not working for more than 24 hours but less than 10 days, Recovery will be affected at the rate of Rs 2,000/- per lift per day and Rs 3,000/- per lift per day after 10 days. (vii) The above lifts shall be repaired through OEM (Original Equipment manufacturer) or through their nearest authorised/accredited agency service personel only.The lowest bidder shall submit and uploading MoU from the OEM of lift or their authorised/accredited agency at time of uploading of tender. (viii) Contractor should possession of valid license from chief inspector of lift. (ix) Contractor should submit all valid docucments before the opneing of tehcnicial bid.

SCHEDULE 'A' - PART II ( SPARE PARTS) for Item No: 02 and 02.01

Supply only controller transformer - (0-440V)/(0-230 /110 /24/12V ) Make - Power tech or equivalent as approved by GE.

Supply only Main contactor 40A, 230V, 50HZ in the lift controller for display Make - Power tech/ TC or equivalent as approved by GE

Rewinding of magnetic brake coil 110V DC

Rewinding of main motor 5 /7.5 HP, 440V, 50HZ, 32A, 1.50m/sec to 0.65 m /per sec speed.

Rewinding of main motor 17.5 / 20 HP, 440V, 50HZ, 32A, 1.50m/sec to 0.65 m per sec speed.

Supply only limit switches

Supply only auxillary relay 4A/9A 24V AC/DC Make : OEN

Supply only gate lock assembly for manually operated door

Supply only 4 Relay Board

Supply only Over load relay 440V, 40A/32A/16A suitable for 5HP/7.5HP/10HP 3 Phase motor.

Supply only Door slipper

Supply only Mother Board - Down Collective, Make - Power tech or equivalent as approved by GE.

Supply only 8 Relay Board

Supply only PF & RR Card 230V 50 HZ 15 A Make : Power Tech or equivalent as approved by GE.

Supply only lift fan 12" 230V 900 RPM. Make - Khaitan / Bajaj

Supply only position indication card suitable to work in 24 V for landing and car.

Supply only brake linerfor motor as per existing model and type.

Supply only lift LED light fittings 3 Watt. Make - Wipro / Philips /Surya

Supply only door operating buzzer 230V, 50HZ AC or 12/24 VDC. Make - Power tech or equivalent as approved by GE.

Supply only door sill for collapsible gate / Auto door (120mm x 800mm)

Supply only Emergency alarm 230V AC/12V DC.

Supply only reed switches 230V AC (or) 24 VDC

Supply only guide shoes for car guide

Supply only guide shoes for counter weight

Supply only collapsible door of existing size (1650 mm width x 2000 mm height)

Supply only Imperforated door (IFG) of size (800mm width x 2000mm height)

Supply only ARD mother board Make - Power tech or equivalent as approved by GE.

Supply only ARD Transformer (0-20.8 Volt) / (0-440 Volt) for up to 20 HP

Supply only operating panel (COP)

Supply only landing operating panel (LOP)

Supply only UPS Battery 7.5AH 12V Make-Exide/Amaron

EOT/HOT CRANE & ELECTRICALLY OPERATED HANGER DOOR AT ICGAS MEENABAKKAM AND BMU CHENNAI

Drain out old oil from main gear box and replacement of new Gear oil and gear shaft Play adjustment for 5 Ton HOT Crane complete all as specified and as directed.

Material and labour for replacement of Break set and lath work & alingnment work complete for 5 Ton HOT Crane including taking down unserviceable break set and taken as credit complete all as specified and as directed.

Supply and replacement of Threaser sump transformer oil for 5 Ton HOT Crane complete all as specified and as directed.

Material and labour for LT sump Gear repair and track gear greasing, rope greasing and Trolley T angle greasing for 5 Ton HOT Crane complete all as specified and as directed.

Material and labour for Courage moving trolley bearing 2 sets for 5 Ton HOT Crane complete all as specified and as directed.

Material and Labour for Inspection of HOT crane of Capacity 5 ton by the authorised competent person and testing on load for proper function and safety all as per standard testing procedure and furnishing the test cirtificate.

Supply and fix in replacement push button for pendant cable, moving trolley including greasing work etc for 3 Ton EOT Crane complete all as specified and as directed.

Dismantling trolley of 3 Ton EOT Crane including all existing items duly disconnected electrically and mechanically and fixing the same after rectification of the fault complete all as specified and as directed.

Disconnecting Power cable right angle side and re fixing the same after rectification of fault including all fixing materials complete all as specified and as directed.

Supply and fix in replacement of CT moving side cables of size 16 core , one Sqmm and as Length recommended OEM for capacity 3 Ton EOT Crane complete all as specified and as directed.

Material and labour for CT moving electrical contact 10 amps for 3 Ton capacity EOT Crane complete all as specified and as directed . Make : BCH/ Siemen/ English electric

Material and labour for Reconditioning of EOT Crane Up and down movement and CT moving parts for 3 Ton EOT Crane and all as per OEM instructions complete all as specified and as directed

Material and labour for Reconditioning of Break set work for 3 Ton EOT Crane and all as per OEM instructions complete all as specified and as directed.

Material and labour for Gear box servicing/overhauling including changing of oil and gear shaft adjustment for 3 Ton EOT Crane and all as per OEM instructions complete all as specified and as directed.

Material and labour for greasing of LT moving gear for 3 Ton EOT Crane and allas per OEM instructions complete all as specified and as directed.

Material and labour for greasing of CT gear for 3 Ton EOT Crane and allas per OEM instructions complete all as specified and as directed.

Supply and filling of Break oil as per requirement for 3 Ton EOT Crane and all as per OEM instructions complete all as specified and as directed. Make : Castrol/Gulf/ Indian oil

Material and labour for Cleaning work of Lifting panel on top of moving channel for 3 Ton EOT Crane and all as per OEM instructions complete all as specified and as directed.

Material and labour for greasing of angle track two side,rope side for 3 Ton EOT Crane and allas per OEM instructions complete all as specified and as directed.

Labour only for LT Breakset alignment work for 3 Ton EOT Crane and allas per OEM instructions complete all as specified and as directed.

Material and Labour for Inspection of EOT crane of Capacity 3 ton by the authorised competent person and testing on load for proper function and safety all as per standard testing procedure and furnishing the test cirtificate.

Servicing and Greasing Gear box of Hanger door including checking and cleaning of motor 2 HP all as specified and directed.

Supply and fix in repairs Motor starter 2 Hp capacity relay range 2.5-4 A Make: Make:L&T, Lagrand or Equivalent

Supply and fix in repairs limit switch start stop 2P spring return AC 230 Volt 16 A Make:L&T, Lagrand or Equivalent

Supply and lay in repairs 2.5 sqmm 4 core FRLS flexible cable for hanger door all as specified and directed. Make: Finolex/Polycab/Havells

PREMIER ENGINEERING SYSTEMS