Maintenance work

Amount

Supplying, laying, fixing and joining the following PVC pipes as per ASTM D-1785 of Schedule 40 of Wall thickness not less than that specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/GI specials /GM specials like elbow, tee, reducers, plug unions, bend, coupler, nipple, GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of fixing materials, special clamps, nails etc., fixing on wall to the proper gradiant and alignment and redoing the chipped off masonry etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers.

25mm Astm-D schedule 40 threaded Pvc pipe with necessary PVC/GI specials for Delivery

32mm Astm-D schedule 40 threaded Pvc pipe with necessary PVC/GI specials for Suction

Supplying of new 32mm Gate Valve etc

Supplying and fixing the following dia PVC pipe type B class conforming to IS 13592and relevant specials including packing the joints with rubber lubricant fixing them into walls with necessary GI Bolts and Nuts with special clamp made of MS angle/Flat including cutting, bending (excluding the cost of MS angle/flat) holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete complying with relevant standard specification and as directed by the departmental officer. 110mm dia PVC SWR pipe type B class, including all required PVC specials etc., all complete.,

Supplying and fixing of 15/12 mm dia C.P Screw Down Tap (Heavy type) with wall flange with Essco fittings including cost of fittings , labour for fixing etc, all complete and as directed by the departmental officers., (The quality of fittings should be got approved from Executive Engineer before use)

Supplying and fixing of SS Heavy Duty Long Body Tap 15 mm with wall flange with Aerator of Essco fittings including cost of fittings , labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use)

Supplying and fixing of 15/12mm Pillar Tap with wall flange with Aerator of Essco fittings including cost of fittings , labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use).

Supplying and fixing of C.P 15 mm Angle stop Cock tap with sliding flange of Essco Fittings including cost of fittings , labour for fixing etc, all complete and as directed by the departmental officers., (The quality of fittings should be got approved from Executive Engineer before use)

Supplying and fixing PVC Health faucet of Best Quality with one metre tube with jet spray and wall hook of Esco fittings of model no. 547 and two way bibcock of Esco fittings of model no.512A or its equivalent including cost of fittings and labour charges for fixing etc, all complete in all respects and as directed by the departmental officers

Supplying and fixing in position White / Colour Glazed ModelFloor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CIpipe of 100mm dia / PVC pipe of 110mm dia, double flappedrigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene neat with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm brass connections,15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection,TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer,dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supply and fixing porcelain (Vitreous China) wash basin as per IS 2556 (Part-I) of 1974 ISI mark of size 550x400mm including cost and fixing of a painted of CI bracket, C.P. Brass waste coupler, P.V.C. Waste pipe, 15mm dia C.P. Piller cock tap,15mm dia superior quality G.M. wheel valve of superior quality (½” x 15”) 15mm x 375 mm P.V.C. Connection (heavy) 32 C.P. Waste plug with Aluminium chain, pointing, T.W. Plugs, Screws, painting the braket with anti corrosive paint two coats etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers. ( The brand and quality of all materials should be got approved from the EE before use).

Supplying and fixing of C.P Shower Arm with overhead shower Rose (light body)with wall flange and Special shower with Revolving Joint (Model No.536-A &540) of Essco Fitting including cost of fittings , labour for fixing etc, all complete and as directed by the departmental officers., (The quality of fittings should be got approved from Executive Engineer before use).

Supplying and fixing of C.P Towel rod 60cm length and 20mm dia with Brackets including cost of fittings , labour for fixing etc, all complete and as directed by the departmental officers., (The quality of fittings should be got approved from Executive Engineer before use).

Removal and Refixing of 10 lits Capacity Water Heater for ISI approved quality including cost of fittings , labour for fixing etc, all complete and as directed by the departmental officers., (The quality of fittings should be got approved from Executive Engineer before use).

Supplying and fixing of 56" Ceiling Fan High Speed etc, all complete and as directed by the departmental officers., (The quality of fittings should be got approved from Executive Engineer before use)

Supplying and fixing of 1.5 TR Split A/C including cost of fittings , labour for fixing etc, all complete and as directed by the departmental officers., (The quality of fittings should be got approved from Executive Engineer before use)

Repolishing the mosaic flooring including polishing stone and hire charges for polishing machine but excluding cost of electrical charges etc, all complete and as directed by the departmental officers.,

Supplying and fixing of 20" Oriya Type Indian Water Closet with a pair of foot rests and the top left rough to receive floor finishing other than Ground Floor confirming to IS specification with "P" or "S" trap filling the sunk portion with brick jelly lime concrete, proportion of brick jelly to lime being 32:12 1/2 (No sand) and flooring the area 75mm thick brick jelly concrete in cement concrete 1:8:16 ( one of cement eight of sand and sixteen of broken brick jelly) using 40mm guage brick jelly and top with red oxide floor finish and plastering the sides of sunk portion in cement mortar 1:3 (one of cement and three of sand) 12mm thick mixed with water proofing compound at 2% by weight of cement used etc. including one coat of bitumen for the sides and bottom, curing etc. complete for all floors

Construction of Inspection chamber size of 60 x60x60 cm with brick jelly concrete 1:8:16 ( one of cement eight of sand and sixteen of broken brick jelly using 40mm gauge broken brickjelly 15cm thick for foundation and 23cm thick brick masonry in C.M. 1:5 ( One of cement and five of M sand) using fly ash bricks of size 230mm x110mm x70mm, plastering with cement mortar 1:3 ( One of cement and three of P sand) 12mm thick on both sides top and bottom including earth work excavation Including SFRC Cover slab of required size fixing in position curing finishing etc., complete complying with relevant standard specification and as directed by the departmental officer.

Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270 kgs / m3, weight 4kg /m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene/ Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall beplaced into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the departmentoffices. The cost includes, cost of material, cost of labour,Scaffolding, transportation

Providing Aluminium Ladder (3.45 m Depth) with relevant standard specification and as directed by the departmental officers.

Supply and providing 1000 litres capacity Priming Tank made up of PVC. Make: SINTEX / EQUIVALENTas directed by the departmental officers.

Supplying and fixing of soild core Flush shutters with teak ply on both sides with teak wood lipping alround 35 mm thick including cost and labour for fixing the Aluminium furniture fittings with ISI mark viz.., 1 no. of Door Handle 'D' type, 3 nos. of 5" Butt hinges, 2 nos. of 6"x1/2" Tower bolt,1no. of 10"x5/8" Aldrop, 1no. of Rubber bush,1no. of door stopper with rubber bush, with required screws etc., complete and as directed by the departmental officers.

Supplying, fabricating and placing in position of Mild steel of grade 500 fe /Ribbed Tor Steels for reinforcement for all floors including cost of binding wire, bending, tying etc, all complete compplying with relevant standard specification and as directed by the departmental officers. up to 16 mm dia - 1MT

Providing two coats putty for the ceiling including cost of putty, labour charges , scaffolding etc., complete complying with relevant standard specification and as directed by the departmental officer.

Wiring with 2 x 1.5 sqmm copper PVC insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990and with continuous earth by means of 1.5 sqmm copper insulated unsheathed single coreMulti Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 in fully concealed PVC rigid conduit pipe heavy duty with ISI with suitable size MS box of 16 SWG thick concealed and covered with 3mm thick laminated hylem sheet for light point with celing rose controlled by 5 amps flush type switch including circuit mains cost of all materials, specials etc., all complete complying with relevant standard specifications & as directed by the departmental officers..

Supplying & fixing of aldrop of size 250mm length and 16mm diametre with required screw,bolts & nuts etc., complete as directed by the departmental officers.

Supplying & fixing of Tower bolts of 250mm length and 12mm diametre with required screw,nuts etc., complete as directed by the departmental officers.

Supplying, fixing, connecting and commissioning of 25 AMPS Metal clad socket (Superior variety) combined with 25AMPS SP MCB in Manufactures mount box fixed flush with the wall including cost of material, necessary interconnection etc, on suitable angle Iron frame work with earthing etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officer.

Supply and fixing of 15 amps 3 pin Flush type Plug Socket and switch in suitable MS Box 16g thick etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officer.

Supplying and delivery of 1.0HP Jet pump set with necessary fittings ,cables etc complete including labour charges for fixing . The pumpset is suitable with the following specifications shall be guarented for by the departmental officer. The brand name and quality of submercible pump set should be furnished.

Supplying of fixing of teak wood /wooden cot of overall size 2.05 x 1.6 x 0.89m and horizontal wooden planks support at sutiable interval with necessary bolts and nuts etc of natural colour with mattress 60 inches wide, 80 inches long and dressing table of 45cm x 38 cm x 180cm made of premium high grade prelam engineering wood with natural wood grain finish including labour charges for fixing etc., complete complying with relevant standard specification and as directed by the departmental officer (The quality of material should be got approved from Executive Engineer before use).

Sub Total

BHAKIYA ASSOCIATES (BID ID -1277476)