Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.6 LAccepted-AOC | ₹34.6 L Quoted ₹35.2 L | L1 | Accepted-AOC Acceptance Letter |
| 2 | L2₹38.9 L+₹3.8 L (10.7%)Rejected-Finance | ₹38.9 L+₹3.8 L (10.7%) | L2 | Rejected-Finance Being other than Lowest |
| Sl No | Description | Qty | Unit | M/S M.A.S ELECTRICALS H1 | M/S FAISAL TRADING CO. H2 |
|---|---|---|---|---|---|
| 1.00 | M&L and T&P required for periodical preventive maintenance, minor repair and well maintenance for the mechanical/electrical & with fuel driven equipment for oil fired based hot water generator type of CHS/Boiler plant system any type/size of any model/make and used as a hot water/hot air circulation purpose including disconnecting of required electrical/mechanical, water and fuel connection along with dismantling & opening of required existing electrical & mechanical parts/items and its connected accessories from the machines/eqpt system and also carried out requisite work pertaining to concerned machine related to electrical/mechanical, water & fuel driven side as demanded at site for plant machine system like inside & out side complete body cleaning/servicing /greasing /oiling / checking, setting & observation and also rectification of all type minor defects problem of plant machine system complete including cleaning complete inside/outside area of combustion chamber any type/size in any portion of any model/make complete work for the CHS/Boiler plant of rated heating capacity 5,00000 KCal/hrs to 6,00000 KCal/Hrs system including dismantling of required electrical/ water/ fuel line connections and removing burner assembly along with it connected mechanical parts fitted on body system of plant in any position and also removing of all type of nut, bolt and other connected parts from plant body system and opening of door entry cover plate and after carryout work in complete body and chamber like checking, servicing including cleaning with de carbonization of heating combustion chamber/ heating tubes based coil and connected parts complete and removing of all type of carbon deposits, material, sludge ,scale, dust particle etc with the help of scrubbing by hand rub wire mesh brush / nylon brush cum steel rod fitted cleaning brush through cleaning push and pull method etc after cleaning it washing by cleaning solution/agent and ensuring that the inside area of chamber has been cleaned up to max level of cleaning range, and after cleaning/servicing work providing of flame proof mouldable refractory castable cement with door packing/gasket materials for filling/plastering work inside area of damaged/broken portion if required at site and after completion of complete job checking any type of leakage problem for water/fuel/fire in system and ensure that making it leakage proof and after re fixing the all removing parts on same to its original position including checking / tightening and also replacement of minor defected item like of nut,bolt,screws, gasket, electric wire connection etc & jointing of electric/ fuel/water pipe lines connections and also making welding work if required for any broken/damaged at site complete and ensure that making it smooth run and properly functional / operational as per the satisfaction level or all as decided, complete all as specified and directed.
Note- (i) All type of Checking/servicing and cleaning related material and minor spare part of items shall deemed to be included in above quoted rates.
(ii) Replacement of spare parts shall be measured and paid separately as under mention respective items in this Schedule of work . | 6 | EACH JOB | 2,900 ₹17,400 Lowest | 10,500 ₹63,000 |
| 2.00 | Description all as per serial item No 01 here in before, but CHS/Boiler plant of rated capacity 4,00000 KCal/hrs system complete work, complete all as specified and directed. | 2 | EACH JOB | 3,500 ₹7,000 Lowest | 8,500 ₹17,000 |
| 3.00 | Description all as per serial item No 01 here in before, but CHS/Boiler plant of rated capacity 300000 KCal/hrs system complete work, complete all as specified and directed. | 5 | EACH JOB | 3,000 ₹15,000 Lowest | 8,400 ₹42,000 |
| 4.00 | Description all as per serial item No 01 here in before, but CHS/Boiler plant of rated capacity 200000 KCal/hrs system complete work, complete all as specified and directed. | 9 | EACH JOB | 3,000 ₹27,000 Lowest | 7,700 ₹69,300 |
| 5.00 | Description all as per serial item No 01 here in before, but CHS/Boiler plant of rated capacity from 100000 KCal/hrs to 110000 KCal/hrs system complete work, complete all as specified and directed. | 2 | EACH JOB | 3,000 ₹6,000 Lowest | 6,500 ₹13,000 |
| 6.00 | Description all as per serial item No 01 here in before, but CHS/Boiler plant of rated heating capacity from 70000 KCal/hrs to 90000 KCal/hrs system complete work, complete all as specified and directed. | 15 | EACH JOB | 1,250 ₹18,750 Lowest | 4,500 ₹67,500 |
| 7.00 | M&L and T&P required for periodical preventive maintenance, minor repair and well maintenance for the mechanical/electrical & with fuel driven equipment for oil fired based hot Air generator type heating plant system used as hot air circulation purposed including complete body cleaning & servicing inside & out side area of combustion chamber any type/size in any position ,any model/make of machine/plant of rated heating capacity from 22000 KCal/hrs to 70000 KCal/hrs system complete work including dismantling of electrical/fuel line connection and removing burner assembly along with it connected mechanical parts fitted on body system of plant in any position and also opening of combustion chamber and after carryout work in side area of combustion chamber like cleaning with de carbonization of complete combustion chamber and connected parts and removing of deposit all type of carbon material,sludge,scale,dust particle etc with the help of scrubbing by hand rub wire mesh brush / nylon brush etc after cleaning it washing by cleaning solution/agent and ensuring that the inside area of chamber has been cleaned up to max range, and after cleaning/servicing work and after re fix the all removed parts on same to its original position including checking/tightening and also replacement of minor defected item like of nut,bolt, screws, gasket, electric wire connection etc and jointing of electric/ fuel pipe lines connections and also making welding work if required for any broken/damaged part at site and after completion of complete job checking all type of leakage problem for air/fuel in system and ensure that making it leakage proof complete all as specified and directed. | 15 | EACH JOB | 1,500 ₹22,500 Lowest | 3,700 ₹55,500 |
| 8.00 | M&L with T&P for checking & rectifying of leakages / damage of existing boiler heating coils single / double type/ hot water storage tank / combustion chamber etc any type/any size made out of MS water tube/sheet based or MS compact in built water heating compartment and duly fitted inside area of CHS/Boiler plant chamber system of oil fired based hot water generator type system of CHS/Boiler plant of rated heating capacity from 90000 KCal/hrs to 400000 KCal/hrs system including disconnecting of electric/water/fuel pipe line connection any type any position from each CHS/Boiler plant system any type/size any capacity & model /make after dismantling and opening of outer cover frame plate with all type of nut, bolt and other connected parts from body system including providing adequate labour and all type of T&P for removing of coil and finding of leakage problem/damage work in side the boiler heating coils/ heating water tank/combustion chamber area system and thereafter rectification of same leakage problem/damage work in heating coils/ heating water tank/combustion chamber with the help of cutting/welding/brazing/ soldering of hot/cold any type of in any position of complete work and make it water leak proof also re fix the all removed parts to its original position including checking/tightening and replacement of minor defected item like any type of nut,bolt,screws, packing gasket ,electric wire connection etc and after making/ jointing of electric/ fuel/water pipe lines connections and also making welding work if required for any broken/damaged part at site and after completion of complete job check for any type of leakage like for water/fuel in plant system and ensure that making it leakage proof and including testing on load, complete all as specified and directed. | 2 | EACH JOB | 5,000 ₹10,000 Lowest | 19,000 ₹38,000 |
| 9.00 | M&L with T&P for cleaning, descaling of water make up tank /storage water tank / fuel tank / hot/cold water tank any type/ capacity any model suitable used for oil fired based hot water/Air generator type CHS /Boiler/ etc plant system including cleaning complete inside area of tank by cleaning solution & scrubbing with the help of wire mesh brush / nylon brush with cloth and removing of deposit all type of sludge,scale,dust particle materials etc and after washing of tank with clear water and ensuring that the inside area of tank has been cleaned, complete all as specified and directed. | 15 | EACH JOB | 4,500 ₹67,500 | 1,800 ₹27,000 Lowest |
| 10.00 | Supply & fixing in replacement of Ignition transformer unit with wire adaptor and having Primary rated voltage 230 V single phase 50 HZ and Secondary 14.5 KV and capacity 35mA type complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed. | 1 | EACH | 4,500 ₹4,500 Lowest | 7,500 ₹7,500 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Sept 2025, 6:00 pmClosed
GE 864 EWS
GE 864 EWS, C/o 56 APO
REPAIR/ REPLACEMENT AND MAINTENANCE, SERVICING OF HEATING PLANT WITH FAN COIL UNIT, PIPE LINE ALONGWITH ITS ELECTRICAL CONTROL PANELS AND LT PANEL, CABLING , EARTHING AND OTHER MISC ALLIED WORK IN VARIOUS E/M INSTALLATION AT BB CANT, SRINAGAR.
2025_MES_726117_1
864/WS-48(T)/2025-26
Open Tender
Civil Works - Others
Item Rate
180 days
GE 864 EWS
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE 864 EWS
₹90,000
Yes
11 Oct 2025
14 Aug 2025
24 Sept 2025
14 Aug 2025
17 Sept 2025
29 Aug 2025
Amount
Description all as per serial item No 01 here in before, but CHS/Boiler plant of rated capacity 4,00000 KCal/hrs system complete work, complete all as specified and directed.
Description all as per serial item No 01 here in before, but CHS/Boiler plant of rated capacity 300000 KCal/hrs system complete work, complete all as specified and directed.
Description all as per serial item No 01 here in before, but CHS/Boiler plant of rated capacity 200000 KCal/hrs system complete work, complete all as specified and directed.
Description all as per serial item No 01 here in before, but CHS/Boiler plant of rated capacity from 100000 KCal/hrs to 110000 KCal/hrs system complete work, complete all as specified and directed.
Description all as per serial item No 01 here in before, but CHS/Boiler plant of rated heating capacity from 70000 KCal/hrs to 90000 KCal/hrs system complete work, complete all as specified and directed.
M&L and T&P required for periodical preventive maintenance, minor repair and well maintenance for the mechanical/electrical & with fuel driven equipment for oil fired based hot Air generator type heating plant system used as hot air circulation purposed including complete body cleaning & servicing inside & out side area of combustion chamber any type/size in any position ,any model/make of machine/plant of rated heating capacity from 22000 KCal/hrs to 70000 KCal/hrs system complete work including dismantling of electrical/fuel line connection and removing burner assembly along with it connected mechanical parts fitted on body system of plant in any position and also opening of combustion chamber and after carryout work in side area of combustion chamber like cleaning with de carbonization of complete combustion chamber and connected parts and removing of deposit all type of carbon material,sludge,scale,dust particle etc with the help of scrubbing by hand rub wire mesh brush / nylon brush etc after cleaning it washing by cleaning solution/agent and ensuring that the inside area of chamber has been cleaned up to max range, and after cleaning/servicing work and after re fix the all removed parts on same to its original position including checking/tightening and also replacement of minor defected item like of nut,bolt, screws, gasket, electric wire connection etc and jointing of electric/ fuel pipe lines connections and also making welding work if required for any broken/damaged part at site and after completion of complete job checking all type of leakage problem for air/fuel in system and ensure that making it leakage proof complete all as specified and directed.
M&L with T&P for checking & rectifying of leakages / damage of existing boiler heating coils single / double type/ hot water storage tank / combustion chamber etc any type/any size made out of MS water tube/sheet based or MS compact in built water heating compartment and duly fitted inside area of CHS/Boiler plant chamber system of oil fired based hot water generator type system of CHS/Boiler plant of rated heating capacity from 90000 KCal/hrs to 400000 KCal/hrs system including disconnecting of electric/water/fuel pipe line connection any type any position from each CHS/Boiler plant system any type/size any capacity & model /make after dismantling and opening of outer cover frame plate with all type of nut, bolt and other connected parts from body system including providing adequate labour and all type of T&P for removing of coil and finding of leakage problem/damage work in side the boiler heating coils/ heating water tank/combustion chamber area system and thereafter rectification of same leakage problem/damage work in heating coils/ heating water tank/combustion chamber with the help of cutting/welding/brazing/ soldering of hot/cold any type of in any position of complete work and make it water leak proof also re fix the all removed parts to its original position including checking/tightening and replacement of minor defected item like any type of nut,bolt,screws, packing gasket ,electric wire connection etc and after making/ jointing of electric/ fuel/water pipe lines connections and also making welding work if required for any broken/damaged part at site and after completion of complete job check for any type of leakage like for water/fuel in plant system and ensure that making it leakage proof and including testing on load, complete all as specified and directed.
M&L with T&P for cleaning, descaling of water make up tank /storage water tank / fuel tank / hot/cold water tank any type/ capacity any model suitable used for oil fired based hot water/Air generator type CHS /Boiler/ etc plant system including cleaning complete inside area of tank by cleaning solution & scrubbing with the help of wire mesh brush / nylon brush with cloth and removing of deposit all type of sludge,scale,dust particle materials etc and after washing of tank with clear water and ensuring that the inside area of tank has been cleaned, complete all as specified and directed.
Supply & fixing in replacement of Ignition transformer unit with wire adaptor and having Primary rated voltage 230 V single phase 50 HZ and Secondary 14.5 KV and capacity 35mA type complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of ignition transformer unit with jack adaptor and having single phase complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of high temperature ignition cable / ignition rod / HT cable with adaptor complete all as per existing type of sample & model and size/type etc and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of electrode set front/rear pair based type complete all as per existing type of sample & model and size/type etc and suitable using it for operation of CHS/Boiler plant unit system and including making connection of work, complete all as specified and directed.
Supply & fixing in replacement of photo cell with lead complete all as per existing type of sample & model and size/type etc and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of sequence controller unit complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of burner primary controller box compact unit based complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work , complete all as specified and directed.
Supply & fixing in replacement of fuel feed pump unit reqd in small/large shape based type with having single/double solenoid valve system and also reqd rotation direction as clock wise rotation/anti clock wise type complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of any type of model & capacity of CHS/Boiler plant unit system & including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of copper wounded electric motor of inside burner assembly unit system with having single phase 230 volt system complete all as per existing type of sample & model with rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of fuel feeding nozzle of suitable size/type of rating capacity from 0.5 to 1.5 GPH and suitable for observing flame temperature maximum up to 85 degree centigrade complete all as per existing type of sample & model and size/type etc and suitable using it for operation of CHS/Boiler plant unit system and including making connection of work, complete all as specified and directed.
Supply & fixing in replacement of fuel feeding nozzle of suitable size/type of rating capacity from 2.0 to 7.0 GPH and suitable for observing flame temperature maximum up to 85 degree centigrade complete all as per existing type of sample & model and size/type etc and suitable using it for operation of CHS/Boiler plant unit system and including making connection of work, complete all as specified and directed.
Supply & fixing in replacement of heavy duty wire mesh bounded flexible type of fuel pipe of size 15 mm dia bore complete all as per existing type of sample/ model with existing type length & size and suitable using it for operation of CHS/Boiler plant unit system and including making connection of work, complete all as specified and directed.
Supply & fixing in replacement of fuel filter cartilage element large & small shape type made out of paper/wire mess cloth bounded type cartage based complete all as per existing type of sample/size & model & capacity and suitable using it for operation of CHS/Boiler plant unit system and including making connection of work, complete all as specified and directed.
Supply & fixing in replacement of fuel filter outer body assembly made out of MS/Aluminium/Aluminium with transparent PVC body based type complete all as per existing type of sample/ capacity & model and suitable using it for operation of CHS/Boiler plant unit system and including making connection of work, complete all as specified and directed.
Supply & fixing in replacement of thermostat switch/thermo couple switch complete all as per existing type of sample/size & model and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of LED controller display unit (Sub-zero unit) complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of pressure/temp/fuel gauge meter with adaptor nut complete all as per existing type of sample & model with brief parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of hooter/siren complete all as per existing type of sample & model with brief technical parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making connection of work, complete all as specified and directed.
Supply & fixing in replacement of solenoid valve along with coil unit complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of axial type blower fan or burner fan complete all as per existing type of sample & model and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply and fixing in replacement of DOL motor starter panel with having sheet metal enclosure type suitable for 3 phase 415 V 50 HZ AC supply system with having over load relay max range 06 Amp to 16Amp suitable using for operating of maximum 3 HP to 5 HP motor complete set all as per existing size/type of sample/model & make or brief technical specification with rated capacity & size/type etc of other make of new replacing items to be match to each other as per the existing old item, complete all as specified and directed.
Supply & fixing in replacement of heating element of rating capacity 2 KW to 3 KW complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply ,fixing & testing and in replacement of burner assembly complete unit along with all type of it connected fitting/fixing accessories complete set all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new burner assembly unit shall properly match to each other as per the existing old burner assembly unit and suitable using it for operation of CHS plant of rated capacity from 22000 Kcal/hrs to 50000 Kcal/hrs unit system and including making electrical & mechanical connection of work, complete all as specified and directed.
Supply ,fixing & testing and in replacement of burner assembly complete unit along with all type of it connected fitting/fixing accessories complete set all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new burner assembly unit shall properly match to each other as per the existing old burner assembly unit and suitable using it for operation of CHS plant of rated capacity from 70000 Kcal/hrs to 100000 Kcal/hrs unit system and including making electrical & mechanical connection of work, complete all as specified and directed.
Supply ,fixing & testing and in replacement of burner assembly complete unit along with all type of it connected fitting/fixing accessories complete set all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new burner assembly unit shall properly match to each other as per the existing old burner assembly unit and suitable using it for operation of CHS plant of rated capacity from 200000 K-cal/hr to 400000 K-cal/hr unit system and including making electrical & mechanical connection of work, complete all as specified and directed.
Supply & fixing in replacement of heating sensor complete all as per existing type of sample & model and size/type etc and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of DTC (Digital temp controller) display unit complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
Supply and fixing in replacement of electrical power contactor of rating capacity 32 Amp 3/4 pole 415 volt along with auxiliary contactor with NO/NC complete all as per existing type of sample & model & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and including making electrical connection of work, complete all as specified and directed.
Supply and fixing in replacement of single phase preventor complete all as per existing type of sample & model with & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and including making electrical connection of work, complete all as specified and directed.
M&L for disconnecting & dismantling of required electric connection and other fitted connected parts/ items and outer grill etc from ceiling mounted cassette based of square shape indoor type fan coil condensing unit system unit system of any capacity any model/type/size any in any position with removing and also opening of all type of fitted nut, bolt locking patch and it connected filter parts from inside and outside area of complete unit system including providing of adequate material and all type of T&P for cleaning and servicing of existing ceiling mounted cassette fan coil unit and its connected fixing accessories of complete system with the help of high efficiency air pressure blower / vacuum pump along with cleaning solution/agent materials for cleaning & serving of complete body area along with removing dust particles with sludge and also providing of oiling and greasing work on parts if required at site and after also refix the all removing parts thereafter completion of complete work ensure that making it smoothly functional and soundless, complete all as specified and directed.
M&L for disconnecting & dismantling of required electric connection and other fitted connected parts/items and outer grill etc from wall mounted hanging based indoor type of rectangular shape fan coil condensing unit system of any capacity any model/type/size any in any position with removing and also opening of all type of fitted nut, bolt locking patch and it connected filter parts from inside and outside area of complete unit system including providing of adequate material and all type of T&P for cleaning and servicing of existing wall mounted fan coil condensing unit and its connected fixing accessories of complete system with the help of high efficiency air pressure blower / vacuum pump along with cleaning solution/agent materials for cleaning & serving of complete body area along with removing dust particles with sludge and also providing of oiling and greasing work on parts if required at site and after also refix the all removing parts thereafter completion of complete work ensure that making it smoothly functional and soundless, complete all as specified and directed.
Supplying, mixing and filling of mono ethylene glycol concentrate required in sealed packed drum along with the necessary additives and inhibitor and the mixing freezing temperature shall be minus 10 degree centigrade complete all as per existing type of sample and suitable using it for operation/function of CHS plant water circulation based type and connected FCU network system, complete all as specified and directed.
Supply ,fixing & testing and in replacement of Hi wall mounted hanging based hot/cold type indoor fan coil units (FCU) with base bracket frame complete set and operating on single phase supply voltage system 230 volt 50Hz and with FCU rated capacity 3000 Kcal or 1.0 Ton unit system along with having inbuilt fixing & fixture accessories like condenser coil , blower fan with motor and front grill with PCB along with operating display control panel with hand operating remote control etc along with providing of both in let and out let hot water pipe line connection and adaptor along with open & closing valve system complete unit all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/AC plant hot water circulation system including making of electrical /water pipe line connection of work, complete all as specified and directed.
Description all as per serial item No 42 here in before, but Hi wall mounted hanging based hot and cold type indoor fan coil units (FCU) complete with of rated capacity 4500kcal/hr or 1.5 Ton unit complete set of system work, complete all as specified and directed.
Description all as per serial item No 42 here in before, but Hi wall mounted hanging based hot and cold type indoor fan coil units (FCU) complete with of rated capacity 6000kcal/hr to 6300kcal/hr or 2.0 Ton unit complete set of system work, complete all as specified and directed.
Supply ,fixing & testing and in replacement of Cassette type square shape size indoor ceiling mounted hanging based hot/cold type indoor fan coil units (FCU) complete set and operating on single phase supply voltage system 230 volt 50Hz and with FCU rated capacity 4500 Kcal or 1.5 Ton unit system along with having inbuilt fixing & fixture accessories like condenser coil , blower fan with motor and front grill with PCB along with operating display control panel with hand operating remote control etc along with providing of both in let and out let hot water pipe line connection and adaptor along with open & closing valve system complete unit all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/AC plant hot water circulation system including making of electrical /water pipe line connection of work, complete all as specified and directed.
Description all as per serial item No 45 here in before, but Cassette type square shape size indoor ceiling mounted hanging based hot/cold type indoor fan coil units (FCU) complete set of rated capacity 6000kcal/hr to 6300kcal/hr or 2.0 Ton unit , complete all as specified and directed.
Description all as per serial item No 45 here in before, but Cassette type square shape size indoor ceiling mounted hanging based hot/cold type indoor fan coil units (FCU) complete set of rated capacity 9000 to 15000 kcal/hr or 3 to 5 Ton unit, complete all as specified and directed.
Supply & fixing in replacement of wall mounted based FCU blower fan motor with blower and connected rubber bush/ bearing complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of FCU unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of wall mounted based FCU system indoor display with PCB card unit complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of FCU unit system and including making electrical connection of work, complete all as specified and directed.
Supply & fixing in replacement of air release value made out of MS/SS based material complete all as per existing type of sample & model and size/type etc and including making connection of work, complete all as specified and directed.
Supply & fixing in replacement of pressure switch unit complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant and Air compressor unit system and including making electrical connection of work, complete all as specified and directed.
Supply ,fixing & in replacement of defected parts from water & diesel circulation pump motor system and including disconnection of electric and suction and delivery pipe line connection from existing Diesel fuel / water circulation pumping system for ratted pump motor of rated capacity from 0.5 HP to 2 HP single/three phase system complete including removing from site and carrying out cleaning, servicing, overhauling and maint work etc including along with replacement of all required defected unserviceable parts which is reqd at site like bush/bearing set with ring, water seal gasket, shaft, fan impeller, gland packing, shaft sleeves, gasket set, cooling fan, inlet/outlet connection adaptor & remetallic of shaft work etc and also replacement of all damage / broken of body parts and it connected items etc and replacing the same with new one parts complete all as per existing type of sample/size & rated capacity and also existing replacing parts are properly match to each other as per the old item and suitable using for pump motor system and making it perfectly serviceable after completion of repair/replacement of work then making oling & greasing work for all moving parts and thereafter also re fixing the all removing parts on same to its original position including checking/tightening and replacement of required minor defected items like of all type of nut,bolt,screws, gasket, electric wire connection etc and after making/ jointing of electric/ pipe lines connections and also making welding work if required for any broken/damaged part at site and after completion of complete job checking all type of leakage in system and ensure that making it sound less & leakages proof and including testing on load, complete all as specified and directed.
Description all as per serial item No 52 here in before, but water & diesel circulation pump motor system of rated capacity from 3 HP to 5 HP single/three phase system of work, complete all as specified and directed.
Description complete all as per srl item No 52 as above here in before but water & diesel circulation pump motor system of rated capacity from 7.5HP three phase system of work, complete all as specified and directed.
Supply & fixing in replacement of heavy duty gate/ball /hand shut down valve/ blow down of size 15 to 25 mm dia bore complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making connection of work, complete all as specified and directed.
Supply & fixing in replacement of heavy duty NRV of size 15 to 25 mm dia bore heavy duty and having capacity to adapting and to stop the high pressure of steam pressure / air pressure system complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler/Air blower plant unit system and including making connection of work, complete all as specified and directed.
M&L for dismantling, disconnecting and taking out defective burnt out electric motor of rated capacity 0.5 HP to 2.0 HP any type any size with single/three phase type complete and including shifting of motor to civil work shop for taking out the burnt out winding from motor system and cleaning of all the parts internally & externally and after rewinding the motor with new one super enamelled copper wire with winding wire of existing size / gauge along with insulation materials and after rewinding the same and applying varnish on winding and providing heat treatment for winding or heating in oven at appropriate temperature as per manufacture design or as directed by Engineer-in Charge including replacement of defected suitable size of shaft bearing with seal and packing kit and also remetalling of existing shaft etc after completion of work transportation from civil work shop to site for refixing , coupling, alignment of motor with pump and jointing it existing position including replacement of defected/broken three phase power supply cable connection plate complete work and testing on load , complete all as specified and directed.
Description all as per serial item No 57 here in before, but electric motor of rated capacity 3.0 HP any type any size with single/three phase type complete set of system work, complete all as specified and directed.
Description all as per serial item No 57 here in before, but electric motor of rated capacity 5.0 HP any type any size with three phase type complete set of system work, complete all as specified and directed.
Description all as per serial item No 57 here in before, but electric motor of rated capacity 7.5 HP to 10HP any type any size with three phase type complete set of system work, complete all as specified and directed.
Supply & fixing in replacement and testing of Monoblock centrifugal pump motor of rated capacity 0.5 HP to 1 HP single phase driven type and with having water flow capacity up to 100 LPM & maximum up to 22 mtr head and suitable using for feeding / circulation of hot/cold water supply system complete set complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc and including making electrical and water connection of work, complete all as specified and directed.
Description all as per serial item No 61 here in before, but Monoblock centrifugal pump motor of rated capacity 1.5 HP to 2 HP single phase driven type, complete all as specified and directed.
Supply & fixing in replacement of MCCB 100Amps 3/4 pole with breaking capacity 16/25 KA 3 phase 415 volt AC supply system complete all as per existing type of sample & model and also making of electric connection with suitable type/size of lug/thimble system complete work, complete all as specified and directed.
Supply & fixing in replacement of MCCB 160 Amps 3/4 pole with breaking capacity 25/36 KA 3 phase 415 volt AC supply system complete all as per existing type of sample & model and also making of electric connection with suitable type/size of lug/thimble system, complete all as specified and directed.
Supply & fixing in replacement of MCCB 200 Amps 3/4 pole with breaking capacity 25/36 KA 3 phase 415 volt AC supply system complete all as per existing type of sample & model and also making of electric connection with suitable type/size of lug/thimble system, complete all as specified and directed.
Supply & fixing in replacement of MCCB 250 Amps 3/4 pole with breaking capacity 25/36KA 3 phase 415 volt AC supply system complete all as per existing type of sample & model and also making of electric connection with suitable type/size of lug/thimble system, complete all as specified and directed.
Supply & fixing in replacement of MPCB of model/type TCMS 100H of rating capacity 55 to 75 A 3/4 pole with breaking capacity 8 to 10KA 3 phase 415 volt 50HZ AC supply system with having adjustable control setting knob with test button complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and including making electrical connection of work, complete all as specified and directed.
Supplying and laying in replacement and testing of 40 mm to 65 mm dia bore 3 layer polypropylene random copolymer pipes (PPR) with all type of PPR fitting complete all as per existing type of sample and size/type etc and including making jointing fittings & fixture of material in any position of the system by in any method of connection of work , complete all as specified and directed.
Supplying and laying in replacement and testing of 20 mm to 32 mm dia bore 3 layer polypropylene random copolymer pipes (PPR) with all type of PPR fitting complete all as per existing type of sample and size/type etc and including making jointing fittings & fixture of material in any position of the system by in any method of connection of work , complete all as specified and directed.
Supplying and laying in replacement and testing of 40 mm to 65 mm dia bore 3 layer polypropylene random copolymer gate valve/butter fly/Ball valve/Hand shut down valve with all type of PPR fitting complete all as per existing type of sample and size/type etc and including making jointing fittings & fixture of material in any position of the system by in any method of connection of work, complete all as specified and directed.
Supplying and laying in replacement and testing of 20 mm to 32 mm dia bore 3 layer polypropylene random copolymer gate valve/butter fly/Ball valve/Hand shut down valve with all type of PPR fitting complete all as per existing type of sample and size/type etc and including making jointing fittings & fixture of material in any position of the system by in any method of connection of work, complete all as specified and directed.
Supplying and laying in replacement of polyurethane based type inlet /out let hot water pipe line connection pipe of size 15/20 mm dia bore with open & closing valve along with adaptor & connectors complete all as per existing type of sample & model and suitable using it for FCU hot water circulation unit system and making of water pipe line connection complete work, complete all as specified and directed.
M&L for cutting welding and jointing & assembly and making difference any type /size and shape of fitting / fixtures as required at site and making from cross arms of angle iron or MS channel , MS sheet, MS bar including bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts and washers, and required welding, bending, cold or hot drilling and making jointing/ holes for bolts in any shape or size and including applying two coats of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces, complete all as specified and directed.
Supply and fixing in replacement of boiler burner rod gun assembly for operating of fuel ignition system unit complete set all as per existing type of capacity of sample/ model complete or brief technical specification with rated capacity & size/type etc of new replacing items to be match to each other as per the existing old item along with providing of nozzle, solenoid valve with coil and other essentially required etc and suitable and smooth operating / functioning for CHS/Boiler plant of rated capacity 4,00000 KCal/hrs system of work , complete all as specified and directed.
Supply & fixing in replacement and testing of pressurised water circulation pump motor of rated capacity 0.5 HP to 1 HP single phase driven type and with having water flow capacity up to 80 LPM & maximum up to 15 mtr head and suitable using for feeding / circulation of hot/cold water supply system complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item and suitable using it for operation of CHS/Boiler plant unit system and including making electrical connection of work, complete all as specified and directed.
M&L for disconnection of electric supply cable from LT panel board and dismantling of existing PCC foundation work any type any size & any description and after removing of unserviceable old LT panel board at different location and including providing Supply ,installed, testing and commissioning of new LT distribution panel board out door based type suitable using for 3 phase 4 wire 415 volt 50 HZ AC supply system with cubical shape factory fabricated and assembled with made out of CRCA mild steel sheet of 2 mm thick with epoxy powder coated painted and with having CPRI approved including making it totally enclosed weather, dust & vermin proof with having double door system and dully fabricated on MS based chanel fram work alog with cutting, drilling ,bending and welding hot & cold with hinges,clamp, nut & bolt etc and including making necessary louvers, gasket ,air vent and both front and rear side door opening and locking system and including consisting of nos of required incoming/outgoing feeder compartments with mounting channel along with providing suitable current rating capacity of copper sub distribution bus bar and copper wire of requisite work pertaining to relaed concerned electrical fitted fixture/parts as demanded at site of paneling system for fixing of inter connection of incomming/out going feeder based on the load and duly attached it with main bus bar system and including cover with PVC colour heat sinkable sleeve as per the phase sequence including providing of digital type volt meter and amp meter of maximum range based on panel design load alongwith indication RYB lamp and suitable type CT with ratio of three phase system and also providing of internal control wiring for display & metering eqpt system with multi stranded copper wire complete and including also providing and comprising along with the following mentioned nos of incoming and out going controlling and operating fitted fixture with fitting accessories, cable grand and earth terminal point and including all the items are dully fixed on inside area of panel board system and providing of danger notice board on both side outer body area of LT panel board complete system work . The panel board should be fitted/mounted on angle iron bottom base frame system of size 50x50x6 mm and 75 cm height including grouted in PCC plate form work with all fixing accessories complete all as specified and directed . Note- (i) Before fabrication & procurement of LT panel board the drawing for the same shall be approved from AGE & GE and the cost for the same shall deemed to be included in the quoted rates (ii) Excavation and PCC work for foundation of panel shall deemed to beincluded in the quoted rates.(iii) The sufficient working space/gaps to be properly maintained in between of each other of bus bar, change over switch, MCCB & MCB feeder and starter feeder etc for to due easily free hand working/maintenance of work in future for entire LT panel board system .
Description complete all as per srl item No 77 as above here in before but providing and comprising along with the following mentioned nos of incoming and out going controlling and operating fitted fixture with fitting accessories etc for LT panel board system work complete all as specified & directed
Description complete all as per srl item No 77 as above here in before but providing and comprising along with the following mentioned nos of incoming and out going controlling and operating fitted fixture with fitting accessories etc for LT panel board system work complete all as specified & directed
Description complete all as per srl item No 77 as above here in before but providing and comprising along with the following mentioned nos of incoming and out going controlling and operating fitted fixture with fitting accessories etc for LT panel board system work complete all as specified & directed
Description complete all as per srl item No 77 as above here in before but providing and comprising along with the following mentioned nos of incoming and out going controlling and operating fitted fixture with fitting accessories etc for LT panel board system work complete all as specified & directed
Description complete all as per srl item No 77 as above here in before but providing and comprising along with the following mentioned nos of incoming and out going controlling and operating fitted fixture with fitting accessories etc for LT panel board system work complete all as specified & directed
Supply only natural and safer biotoilet bioculture anaerobic and facultative bacterial consortium which is used to degrade organic waste/faecal waste from septic tank/community toilet/sewage holding sump/well/anaerobic STP etc .The single celled microorganisms/bacteria that rapidly increase healthy bacterial colonies for faster commissioning once they get exposed to organic waste/faecal waste which is the food for microbes and stabilize natural degrading ecosystem inside the tank by converting the organic wastes into methane (CH4) and carbon dioxide (CO2) as by product these microbes should be capable to withstand already treated water with phenyl, chlorine, bleach, caustic,drain cleaners, disinfectants, toilet bowl cleaners,detergent,oil and grease and other chemicals etc. The specific strains of bacteria mentioned here in before should have overall capacity to reduce the foul odour and reduces sludge formation rapidly by suppressing harmful bacterial growth hence increases holding capacity of tanks and the area of applications should vary from toilet to septic tanks/sewage sump and faecal sludge treatment plant (FSTP) /anaerobic STP etc and the bio toilet,bio culture anaeboric, facultative bacterial consortium should be in sealed packets in required packet/bags and duly marked latest manufacturing date and batch No of fresh lot and suitable for using in necessary utilisation in septic tank/community toile/sewage holding sump/well/ anaerobic STP etc system complete of make- bio reme by Greencraft Labs / Septomax/ bio pique or equivalent of other make as approved by accepting officer, complete all as specified and directed Note- (i) The biotoilet bioculture anaerobic material supplied by the contractor should be in compliance and with produced all testing reports/ certification and other concerned documents of pertaining to related supplied items which is issued/given by the authorised agency/manufacturer and the same test/certification report submitted to this office for further records. (ii) The contractor shall deliver the materials as per the site requirement and as well as per demand completeall as specified ,decide and direction given by the Engineer In Charge.
Material & labour and require other T&P for cutting, fabricating, welding, jointing ,assembling and including installation work at various location for fire fighting hut point made out with the help of mild steel pipe of size 40 mm dia bore of approximate length 12.00 RM and with having and making approximate overall dimension of 1.3 mtr (Length) x 1.2 mtr (width) x 2.0 mtr (height) and providing ,making and fixing of top cover shed by plain mild steel sheet of size 1.00 mm thick bend in the shape of hut with approximate area1.8 sqm for complete fabricating work for fire hut point system and including painting two coat of red colour paint over a coat of red oxide and writing fire word in bold letter top on the hut on both side in Hindi ,English and Urdu letter with the help of white paint including proving/welding of iron hook of 08 No, river clean sand dust filling qty of 0.5 cum storage at fire fighting point area. The fire fighting hut point both leg pipe dully fixed on ground up to 45 cm below ground level and making PCC foundation cum plate form of size 1.3 x 1.0 x 0.30 mtr and cover by using PCC of ratio 1:3:6 type C2 including 20 mm to 40 mm stone aggregate including making surface finishing with the help of cement mortar of ratio 1:4 complete all as specified and directed by Engineer-in-Charge and also including providing of new one of following mentioned nos of comprising eqpt/items of make- Hira or equivalent make & model No of other eqpt/items as approved by Accepting Officer (a) Fire bucket made out of fresh GI steel sheet as per standard size of maximum 8 Ltr of capacity with having round hook in bottom side complete all as per make -Hira with Model/prod No-35711of 04 Nos (b) Fire beater with wooden/bamboo handle complete all as per make -Hira with model / prod No-35713 of 02 Nos (c) Fire hook with wooden/bamboo handle complete all as per make -Hira with model / prod No-35712 of 02 Nos (d) Iron crow bar round/hexagonal type 25 mm dia 72 inch long all as per make -Hira with model / prod No-33918 of 01No (e) Iron ganti/pickaxe with wooden handle of size 30 inch complete all as per make -Hira with model / prod No-32821 of 02 Nos (f) Iron shovels with plastic/wooden handle with ‘D’ grip and carbon steel blade of round size of approximate 255x300 complete all as per make -Hira with model / prod No-35715 of 02 Nos (g) Iron fire Axe with wooden/rubber handle as as per standard size complete all as per make -Hira with model / prod No-35714 of 01No (h) ABC multi purposed (dry powder stored pressure type) Fire Extinguisher cylender of capacity 9 Kg ISI mark including initially full filled fire fighting related materials on cylinder system with hose horn pipe complete set all as per make -Hira with model / prod No-35725 of 02 Nos (j) Fire Extinguisher cylender with mechanical type foam based of capacity 9 Kg, ISI mark including initially full filled fire fighting related materials on cylinder system with hose pipe complete set all as per make Hira with model / prod No-35756 of 02 Nos.complete all as specified and directed Note - Before fabricating,welding, jointing,assembling of system work for fire fighting hut point, the structural making design drawing for the same shall be got approved from AGE E&M.
Material,lobour & other T&P required for de-watering of balancing storage water in side area of MS tank complete and after carry out starting the cleaning work in side of mild steel storage water tank of storage capacity maximum up to10000 litres all as per existing any type/size any shape and including cleaning & removing and taking out of all type of wet muddy format from the inside area of tank and cleaned up to bottom level of the tank and after that removing & scraping existing old paint and along with rusted layer from inside and outside body area of Mild steel tank and it connected supports and pipe line with accessories system and including providing and applying painting work with one coat of red oxide primer and than after applying over two coats of best quality synthetic enamel water proof as recommended colour paint on outer side complete body surface area of Mild steel tank and it connected supports and pipe line with accessories complete system up to above ground level and also making jointing/welding work for if any found broken/damage/cracks/hole on in and outside of tank portion at site and making it leakage proof complete work and also cleaning and removing of unwanted deposit material and vegetation from the out side top floor/roof of the tank area , complete all as specified and directed Note- (i) All type of required T&P, labour and transportationcharges shall be deemed to be included in the quoted rate ..
M&L and T&P required for periodical preventive maintenance & minor repair and well maintenance for the mechanical & electrical operated equipment of the sewage & drainage pump house area related pump motor and its attachment system. The pump motor attachment having operated AC supply voltage 3 phase 415 volt system with any type any capacity any model complete including disconnecting of required electric/mechanical & pipe line connection along with dismantling & opening of required existing electric & mechanical parts/items and its connected accessories from each motor pump complete body system. After that carry out electrical and mechanical related work at various location for motor pump attacment system like cleaning of complete body and including servicing with greasing & oiling of complete inside and out side area of every motor pump attachment body system and including checking of all type of defect occurring in electric and mechanical parts / items side like control panel with wiring of system, gaskets, fans, water leakage problem etc along with rectification of defect problem work if required easy possible at site and also carry out work at site for pump motor attachment system like adjustment,tighting, alignment, vibration of base frame of motor pump with pully/shaft, pipes and it connected attachment system complete After checking/, servicing and also carry out minor repair/rectification to defects/fault work and including checking/tightening of all type of loose nut , bolt, clamps and also making welding work if required at site and making the system sound less and ensure making it all type of water leakage proof after completion with rectification of all complete job work, refix all the disconnected item/parts on same place also put pump motor on trail run on full load and ensure that making it smooth run and properly functional/operational complete as per the satisfaction level of technician, , complete all as specified and directed Note- (i) The above mentioned work shall be carried out by well experienced/qualified technician/mechanic of the related field .(ii) All type of servicing related material and minor spare part of items and technician visit charge shall deemed to be included in above quoted rates.
Supply and fixed in replacement of factory assemble rectangular shape type bus bar chamber box of rated capacity 400 Amp for 3 phase 4 wire 415 volt system and made out of heavy duty MS sheet 2 mm thick with outer box of size 60 CM long, 40 CM wide and 16 CM hight with epoxy powder coated totally enclosed weather ,dust & vermin proof and having single door system and fabricated on MS hinges ,clamp, nut & bolt or drilling ,bending and welding etc and including necessary locking arrangement on front side complete and with having 04 Nos of aluminium bus bar of rated capacity 400 Amp and duly fitted it heavy duty it porcelain insulator based attachment system,complete all as specified & directed
Supply,filling and topping up in replacement of starter oil/gear box oil complete all as per existing type of sample and grade and suitable using for existing type of equipment system complete all as specified and directed
M&L for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level with connecting to the galvanised GI earth strip of size 25x4 mm as earth lead by means of bolts, nuts, check nuts and washers and also provision of GI light grade pipe 40 mm dia bore for strip protection system including provision of concrete pit cover made out of in PCC (1:2:4) type B-1 using 20 mm graded of stone aggregate for and frame work and 20 mm dia bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point along with fixing arrangement funnel wire mesh and including earth work in hard dense soil with returning filling in and removal of surplus soil to a distance not exceeding 10 mtrs and connecting to earth point complete all as specified and directed. Note - During the excavation of earthing earth pit work if any ground water logging found in bottom surface area at site, the cost for dewatering of said water out side the pit through pump set and all using T&P charges for the same work deemed to be included in this above quoted rate of schedule .
Supply fixing of earth continuity conductor or main GI/aluminium earthing strip lead duly fixed to wall /ceiling or chases/ buried in ground etc any other indicated situation for earthing etc. as required of strip of size 25x3 mm complete all as specified and directed.
Supply, laying in replacement and testing of LT cable XLPE insulated armoured heavy duty electric cable with aluminium conductor 11000 volt grade with outer area PVC bedded galvanized steel strip along with cross sectional area of cable of suitable size 185 sqmm 3.5 core type including providing of suitable size/type of cable lug/thimbles with crimping and duly fixed on existing system complete work all as specified and directed.
Description all as per serial item No 91 as above here in before , but electric cable of suitable size 120 sqmm 3.5 core type complete all as specified & directed
Description all as per srl item No 91 here in before , but electric cable of suitable size 95 sqmm 3.5 core type complete all as specified & directed
Description all as per srl item No 91 here in before , but electric cable of suitable size 70 sqmm 3.5 core type complete all as specified & directed
Description all as per serial item No 91 as above here in before , but electric cable of suitable size 50 sqmm 3.5 core type complete all as specified & directed
Description all as per serial item No 91 as above here in before , but electric cable of suitable size 35 sqmm 3.5 core type complete all as specified & directed
Description all as per serial item No 91 as above here in before , but electric cable of suitable size 25 sqmm 3.5 core type complete all as specified & directed
Description all as per serial item No 91 as above here in before ,but electric cable of suitable size 16 sqmm 3.5/4 core type complete all as specified & directed
Excavation of earth work in trenches/under road/ PCC path/ hard standing and any type of soil with not exc 1.5 mtr wide and n exc 1.5 mtr in depth for laying of cable/pipe or other any purposed etc and getting out in any type of soil and exvated materials etc complete all specified and directed.
M&L for sand cushioning for under ground cable provided with a layer of 8 cm thick sand before laying cable and 15 cm thick a layer of sand after laying and stretching the cable complete all as specified and directed.
M&L for brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat complete all as specified and directed.
Returning, filling in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick in any type of soil complete all as specified and directed.
Removing excavated material to a distance not exceeding 50 mtr and depositing where directed complete all as specified and directed.
Supply, fixing and laying of GI pipe of size 80 mm bore medium grade with all fitting laid in trenches/underroad /floor/ pole/wall for protection of cable including providing clamping arrangement for holding of pipe on pole/wall complete all as specified and directed.
Description all as per serial item No 104 as above here in before , but GI pipe of size 50 mm bore medium grade ccomplete all as specified and directed
Description all as per serial item No 104 as above here in before , but GI pipe of size 40 mm bore medium grade ,complete all as specified & directed
Supply, fixing in replacement of LED street light fitting of rated capacity 35W 230 volt AC operated outdoor type with having high pressure dia cast aluminium hosing and heat resistance with LED driver, LED lamp bracket holding system complete light fitting including providing of suitable dia with length of GI pipe light grade bracket with bend shape and it outer dia shall be properly match/setting to each other of new fitting /fixture hole attachment system including duly fixed bracket on existing pole/bldg wall with the help of 02 Nos of MS fixing clamp along with nut bolt and including providing of suitable type of flat flexible two/three core cable and making electric connection , complete all as specified and directed.
Supply, fixing of LED solar Panel based street light fitting of rated capacity 24Watt including providing of as manufacture recommended length and dia with size of galvanized steel pole along with in built lithium iron battery,solar panel,charge controller with dusk down sensor complete set and including making of hole for dully bured and fixing of pole on ground up to 45 cm below ground level and making PCC foundation , complete all as specified and directed.
Supply fixing of rigid non metallic PVC conduit/casing capping of suitable size 25 mm dia bore with all connected fitting/fixture accessories duly laid in trenches/wall/roof/ceiling area including providing clamping arrangement for holding of pipe on wall / ceiling roof etc area with proper size of clamps, nut bolt and washer etc , complete all as specified and directed.
Supply and fixing in replacement of PVC insulated and overall PVC sheathed electric cable round /flate type with having copper conductor multi standard type wire and overall cross section area of size 10 sqmm 3 core of rated 1100 volt grade and including laid in wall/floor/surface area or passing through pipes/ wall/ surfaces , complete all as specified and directed
All Description complete all as per srl item No 110 as above here in before but cable of size 6 sqmm 3, core complete all as specified and directed
Supply ,fixing in replacement of digital type Amp meter all as per existing type sample/size complete for to showing of suitable amp maximum range from 0 to 500 Amp complete including providing and making in additional/alteration of existing wiring connection system if required at site for the purposed fixing and operating and functional of new metering system , complete all as specified and directed
Supply ,fixing in replacement of digital type Volt meter all as per existing type sample/size complete for to showing of suitable amp maximum range from 0 to 500 Amp complete including providing and making in additional/alteration of existing wiring connection system if required at site for the purposed fixing and operating and functional of new metering system ,complete all as specified and directed
Supply ,fixing in replacement of RYB LED indicator lamp set complete and making electric wire connection , complete all as specified and directed
Supply and fixing in replacement of heavy duty shock resistance and fire resistance type insulating rubber foot matt of suitable size 1mtr x 2 mtr x 19 mm made out of blended of high quality natural rubber with having the upper side surface of mate is chequered / rough marked and the bottom side of mate is anti and skid no slip type suitable for conductive parts, and prevent to people from being exposed to excessive voltage of 440/1100 volt AC supply system and to be safely dissipated & also reduce electromagnetic interference all as specified and directed
Supply and fixing in replacement of automatic servo controller PCB suitable using for operating and controlling of automatically servo voltage stabilizer of rated capacity 150 KVA 3 phase 4 wire system complete all as per existing type of sample & model with brief technical specification, parameters & rated capacity and size/type etc of new replacing items shall properly match to each other as per the existing old replacement item , complete all as specified and directed.
Supply,filling and topping up in replacement of Servo voltage stabilizer oil complete all as per existing type of sample and grade and suitable using for existing type of voltage stabilizer system , complete all as specified and directed
Supply and fixing in replacement of copper thimble/lug of rated size from 150 sqmm to 200 sqmm ,complete all as specified and directed
Supply and fixing in replacement of copper thimble/lug of rated size from 70 sqmm to 120 sqmm , complete all as specified and directed
Supply and fixing in replacement of copper thimble/lug of rated size from 25 sqmm to 50 sqmm ,complete all as specified and directed
Supply & fixing in replacement of MCCB of rated capacity 400 Amps 4 pole with having breaking capacity 35/36KA and suitable using for 3 phase 415 volt AC supply system complete all as per existing type of sample/model a nd dully fixed it on existing position of system with the help of including providing of suitable size/type of cable lug/thimbles , complete all as specified and directed
Supply & fixing in replacement of MCCB of rated capacity 315/320 Amps 4 pole with having breaking capacity 35/36 KA and suitable using for 3 phase 415 volt AC supply system complete all as per existing type of sample/model a nd dully fixed it on existing position of system with the help of including providing of suitable size/type of cable lug/thimblescomplete all as specified and directed
Supply & fixing in replacement of MCCB of rated capacity 125Amps 4 pole with having breaking capacity 16 KA and suitable using for 3 phase 415 volt AC supply system complete all as per existing type of sample/model a nd dully fixed it on existing position of system with the help of including providing of suitable size/type of cable lug/thimbles , complete all as specified and directed
Supply & fixing in replacement of MCCB of rated capacity 63 Amps 4 pole with having breaking capacity 16 KA and suitable using for 3 phase 415 volt AC supply system complete all as per existing type of sample/model a nd dully fixed it on existing position of system with the help of including providing of suitable size/type of cable lug/thimbles , complete all as specified and directed
Supply, fixing, testing and commissioning of digital type chlorine ISI marked testing meter and suitable using it for the purpose of finding out the residual chlorine concentrations value from the sewage treatment plant water system and with having measuring range from 0.5mg/Ltr to 200mg/Ltr with accuracy of +/- 3% and with good resolution of 0.01PPM complete set and also providing of suitable type of testing chemical reagent of 02 Ltr , complete all as specified and directed
Supply fixing, testing and commissioning of digital type TDS (Total Dissolved Solids) ISI marked testing meter and suitable using it for the purpose of finding out the dissolved solid concentrations value from the sewage treatment plant water system and with having measuring range up to 1000 ppm with accuracy of +/- 2% and with TDS factor 0.4 to 1.0 range , complete all as specified and directed
Supply fixing, testing and commissioning of digital type PH ISI marked testing meter and suitable using it for the purpose of finding out the dissolved Hydrogen ion concentrations value from the sewage treatment plant water system and with having measuring range from 0-14PH (Mole/Ltr) with accuracy of +/- 0.01PH complete set and also providing of suitable type of testing PH paper strip/litmus papar strip 5 set with each having of 50Nos testing papar , complete all as specified and directed
Notes :- An amount of Rs. 58150.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.
M/S FAISAL TRADING CO. (BID ID -3417192)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .