Addition/alteration to building No P-454 and Demolition of Security wall along with Sentry post (old type) at JAK LI Regt Centre, Srinagar Under GE 970 EWS

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L vitrified coloured light shade tiles 10mm thick ( square/rectangular) polished area of each tiles not exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or colourer cement to match the tiles and laid over and incl 15mm thick screed bed in CM (1:6) , complete all as specified and directed.

Description all as per item No 04 above but in vertical surface complete all as specified and as directed.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tileexceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match and laid over and incl 15mm thick screed bed in CM (1:6) , complete all as specified and directed.

M&L Machine cut kota stone 18 to 20 mm thick in flooring laid over and incl 20 mm thick screed bed or bedding layer in CM 1:3 and jointed in grey cement slurry mixed with pigment to match the slab including rubbing and polishing including demolition of stone slab and tiles of any description or thickness in floors and aprons ets laid bededd in any mortarcomplete all as specified and as directed.

M&L for Kota stone slab 12 to 15mm thick in riser of steps, skirting, dado and pillar laid over and incl 10mm thick rendering/ backing coat in CM 1:3 and jointed, pointed, rubbing,polishing complete all as specified and as directed.

M & L Glazed ceramic coloured tiles in vertical surface 350 x250x7 mm or 450 x350 x7mm thick set and jointed in neat cement slurry and pointed in while or colour cement to match the tiles, laid over and incl 10mm thick rendering/ backing coat in CM 1:4, complete all as spd and directed.

Demolition Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc.complete all as specified and directed .

M&L for 12 to 15 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms/WHB drain tub and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and incl 10mm thick rendering/ backing coat in CM 1:3 complete all as specified and directed.

M&L Providing edge moulding to18-20mm thick stone of countersvanities etc. including machinepolishing to edge to give highgloss finish etc. complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6, type C-2, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A", complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggte) as in sub base of floor,complete all as specified and as directed.

M&L for laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Demolition of cement concrete in reinforced ( reinforced cut as required to faciliitate demolition) roofs, floors beams ,stair cases,landings,chajjaas and similar suspended work complete all as specified and directed .

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed .

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

M&L For RCC 1:1½:3 Type A1, (using (20 mm graded stone aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats, etc. FE 410-W (Gde- E-250) quality A, complete all as specified and directed .

M&L For framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed .

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed ..

S&F Non asbestos fibre cement building boards fixed or laid /inserted 8mm thick fixed to existing timber/GI /Aluminium frame/flat iron frame work with screws all as directed complete all as specified and directed ..

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. complete all as specified and directed .

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed .

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 20 mm thick softwood eaves board with nails in any situation (except flooring and skirting) planed one side with butt joints complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5m depth for foundation etc and getting out in any type of soil complete all as specified and directed ..

Removing excavated material not exceeding 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm any type of soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed .

Description all as per item No 33 above but except bricks complete all as specified and directed.

M & L brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM (1.4) complete all as specified and directed.

Taking down cement plaster any description on brick or stone masonry walls incl racking out joint , Hacking for key ,scrubbing down with water complete all as specified and directed.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces ion cement mortar 1:4 finishing the surface even and smooth ( without using extra cement) in two layers with WPC complete all as specified.(WPC paid separately ) complete all as specified and directed.

M & L Rendering 15 mm thick on other than fair faces of brick work or concrete surfacesw in cement morar 1:6 finishing the surface even and smooth ( without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plaster surface of wall and applying 3mm thick of wall putty, complete all as specified and directed.

M&L for painting to new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed .

M&L for preparation of new plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed .

M&L for Complete removal of existing treatment on wall, ceiling, roof projections including facia, cornices etc by scrapping with mechanical sander ( having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour with mechanical sander having RPM of 1500-2700 rpm., with internal dust extraction system for clean environment, and preparation of old plastered/scrapped surfaces of wall/ceiling by filling cracks by external wall putty/crack fill paste and applying exterior water proof wall care putty @ 1 Kg(undiluted) per sqm. of average thickness 1mm to 2mm over the prepared plastered wall/ceiling surfaces, one or more coats and grinding the puttied surfaces with mechanical grinder for making the surface even and smooth for receiving primer complete all as specified and directed.

M&L for applying two coats of oil bound distemper over one coat of primer, complete all as specified and directed.

M&L for applying two coat of applying two or more coats of 100% Premium acrylic smooth exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, technology. Excellence dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives & color stay technology, Excellent dirt pickup resistance @ 1.79 litre/10 sqm diluted with water as per manufacturers instructions over and including priming coat of exterior primer applied @ 0.9 litre (Undiluted) / 10 sqm over old/new putty surfaces of wall/ceiling complete all as specified and directed. Note-Paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame ) area not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame ) area exceeding 1.5 Sqm and not exceeding.4 .00 Sqm each all as specified and directed.

S&F powder coted Anodised aluminium frame for doors, windows, ventilators with one or morerebates including joining cleat forfixing and including all fitting etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed.

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, in opening as per specification and drawing, complete all as specified and directed.

S&F Factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face and 2 mm thick plain color PVC sheet on back face supply and fixing in frame at site as per specification and drawing, complete all as specified and directed.

S&F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixinglugs, hinges, lock strike plate,etc.complete all as specified and directed.

S&F 35 mm thick IInd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick factory made glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

M&L for Preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed .

M&L for Preparing old wood and wood based materials of any description and girth, not otherwise described and treated with one coats of synthetic enamel etc, complete all as specified and directed .

S&F Box type steel window (Factory made) outer frame made out ERW tube 'P' section 65mmX45mmX25mm and shutters of ERW tube 'P' section 50mmX35mmX20mm openable (double) shutter with glazed openable shutter on (External side) and wire gauzed openable shutters on (internal side) with steel pintal hinges, steel handle 100mm long, mild steel tower bolt 02 Nos on each shutter, stopper of 'Z' section and its locking arrangement at mild steel hook and eye including 0.36mm dia nominal dia of stainless steel wire cloth avg width of aperture 1.4mm dia and 3mm thick sheet glass window and 3mm figured glass for ventilators with 8 mm MS Grill bars, complete all as specified in Drg No CESZ/TD-1018/2011 sheet No 1/3 to 3/3 and directed. Note: The quoted rate against the above item shall also include:- (i) For provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat tar on the ends of steel frame in contract with bricks/concrete surface. (ii)04 Nos MS steel Lugs of 20mmX5mm MS flat 20cm long over all welded to frames (iii)PCC block for embedding lugs (iv) 0.36 mm dia SS wire mesh (v) 3 mm thick sheet glass- for window (vi) 3 mm thick figured glass- for ventilator (vii) 8mm squre MS grill bars

M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L for Preparation of old steel painted surfaces and applying one coats of synthetic enamel paint , complete all as specified and directed .

S&F Butt hinges medium weight cold rolled stainless steel 100 mm size, complete all as specified and directed .

S&F Butt hinges medium weight cold rolled stainless steel 75 mm size, complete all as specified and directed .

S&F extruded aluminium alloy D type handles,anodised of 75mm size ISI marked complete all as specified and directed.

S&F Aluminium handles, D type, anodized 150 mm long ISI Marked, complete all as specified and directed .

S&F 150mm long aluminum anodised barrel tower bolts of extruded section ISI Marked, complete all as specified and directed.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long dia 16 mm complete.ISI Marked, complete all as specified and directed.

S&F Mild Steel 300mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete. ISI Marked,complete all as specified and directed.

S&F 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 sq.m in each pane, complete all as specified and directed .

S&F 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square but not exceeding 0.5 sq.m in each pane, complete all as specified and directed .

S&F 0.36 mm dia nominal dia of stainless steel wire cloth avg width of aperature 1.40 mm and fixed with SS wire staple etc,complete all as specified and directed .

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 20 mm outer dia pipe of bore 3-layer PP-R (Polypropylene Random Polymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene Random Polymer fittings fixed complete to walls, ceilings or infloors etc., complete all as specified and directed.Make : SFMC/SAFE/PRINCE

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed .

S&F 25 mm outer dia pipe of bore 3-layer PP-R (Polypropylene Random Polymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene Random Polymer fittings fixed complete to walls, ceilings or infloors etc., complete all as specified and directed . Make : SFMC/SAFE/PRINCE

Dismantling existing water tank not exceeding 1000 ltr and removing from site including necessary connected accessories, complete all as specified and directed .

S&F Rotational moulded PVC water tanks of 1000 Ltrs capacity, cylinderical vertical with closed top hoisted and fixed in position including, complete all as specified and directed.

S&F in repairs 20 mm PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and directed.

S&F 25 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 25 mm dia (min weight- 455 gms) complete all as specified and directed.

S&F in replacement vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest including trap, PVC flushing pipe and anti-syphonage pipe including PVC valveless, syphonic action, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve, float and handle including brackets, complete all as specified and directed.

S&F in replacement sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and onnecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 40 mm bore waste coupling complete all as specified and directed .

S&F inreplacement plate rack 1 mm thick stainless steel sheet of size 600x900mm fixed with washer complete all as specified and directed

S&F in replacement vitreous china wash basin (Padestal pattern), white, flat back, size 600 x 480 mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste coupling,complete all as specified and directed.

S&F in replacement chromium plated fancy type mixer for mixing hot & cold water for WHB 15 mm dia screwed down for iron pipe and fixed complete all as specified and directed.

S&F in replacement chromium plated fancy type wall mixer for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as specified and directed.

S&F in replacement chromium plated fancy type Sink mixer for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as specified and directed.

S&F in replacement Low density PVC connection commercial quality 600mm long including PTMT nuts at both sides of 15mm bore and fixed, complete all as specified and directed.

S&F in replacement for Soap dish, vitreous China white, approximate size 160x160x90mm, complete all as specified and directed.

S&F in replacement 15 mm dia CP sower rose, 110 mm bore wihout or without swivel joints any size incl fixing to steel pipes or unions etc,complete all as specified and directed.

S&F in replacement 15mm bore bib tap long nose/long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass, weight n ot less than 450 gms ferrule and fixed, complete all as specified and directed .

S&F in replacement 15mm bore stop/angle cock, cast copper alloy CP, fancy type high pressure with capstan head handle,wt n less than 450 gms screwed both ends for iron pipe of for unions complete all as specified and directed.

S&F in replacement 15mm bore stop/angle cock, cast copper alloy CP, fancy type high presure with capstan head handle,wt n less than 450 gms screwed both ends for iron pipe of for unions , but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F in repairs for 75/100 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cementt, complete all as specified and directed .

S&F in repair PTMT grating doom 100 mm dia with waste hole.(Min.weight 40gms), complete all as specified and directed .

S&F in repair Brass chromium plated tubular towel rail 20mm dia `D' type 60 cm long between flanges, complete all as specified and directed .

S&F in repair 25 mm dia Stainless Steel curtain rods including fixing arrangements, complete all as specified and directed .

Taking up or down 100mm bore of CI/PVC pipes (incl all fittings), with spigot and socket ends and lead joints incl burning out joints and removing lead of 100/75mm dia pipe, complete all as specified and directed .

S&F 110mm UPVC, SWR pipes, single socketed in any length with rubber ring joint leaid in trenches or in floor, complete all as specified and directed.

Description all as per item no.98 above but 75mm bore pipe, complete all as specified and directed .

S&F 110mm UPVC, SWR pipes, single socketed in any length with rubber rign joint fixed with wall, complete all as specified and directed.

Description all as per item no.100 above but 75mm bore pipe,complete all as specified and directed.

S&F UPVC bends (any radius) of 110mm dia complete all as specified and directed.

S&F UPVC bends (any radius) of 75mm dia complete all as specified and directed.

S&F traps 'P' or 'S' of 110mm dia complete all as specified and directed.

S&F cowls of 75mm dia complete all as specified and directed.

S&F cowls of 110mm dia complete all as specified and directed.

S&F in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed .

M&L for PCC 1:3:6, type C-2 using 40 mm graded crushed stone aggregates in surface channels and drains complete all as specified and directed .

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed .

M & L paving / parking tiles of techno commercial eqivalent of size 300x300x10 mm thick over and incl 20 mm thick screed bed or bedding layer in CM 1:6 and jointed in neat cement slurry and pointed with white cement to match the joint complete all as specified and directed.

S&F in repair PVC waste pipe 32 mm dia complete all as specified and directed.

M&L 150mm bore salt-glazed stoneware drain pipes grade 'A' laid in trenches in concrete padding jointed in cement mortar 1:1 all as specified and directed.

M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8, type D2 for 150mm bore complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) incement concrete 1:2:4 type B1 smooth finished and reforming benching as required of 150mm dia pipe.

Taking down carefully any type of copper/aluminium point wiring (light,fan, socket or power) complete including conduits/casing caping with fittings such as switches,ceiling roses, pendents,regulators,bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of wall to match with the original existing finish complete all as specified and directed.

Taking down unserviceable any type of Main Switch, DB's including MCBs incl wooden/GI/MS sheet board etc and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed by Engr-in-charge.

Taking down unserviceable any type of copper/aluminium sub main wiring of any size/core/type complete including conduits/casing caping etc, removing the materials/debris and making good the disturbed surfaces of walls, floors and ceilings etc to match with the original existing finish complete all as specified and directed.

M&L for Point wiring using FRLS-H PVC insulated unsheathed, multistranded copper conductor cable 1.5 sqmm drawn through and including PVC conduit of min 20 mm dia by Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc fo concealed conduit wiring with modular flush box metal of GI sheet minimum 1.8 mm thick with earth terminal for safety, flush metal GI box of required modules as per site requirement and modular plate with support frame white in colour of required modules, 3mm thick including all fittings i.e. tees, bands and junction boxes, screws etc. complete for One light/Fan point controlled by one switch 6 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing) Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate complete all as specified and directed.. Note:- (a) wiring shall be done by using colour coding (b) Earth wire shall be of green colour.

Description all as per item No 118 here in above but One 3 pin socket outlet 5 amps on same board with other switches, with cables 1.5 sq. mm size complete all as specified and directed.

Description all as per item No 118 here in above but One 3 pin socket outlet 5 amps on the Indepdent board with other switches, with cables 1.5 sq. mm size complete all as specified and directed.

Supply and fixing Socket, 6A - 3 pin combined 2 module, fabio series 6 Amps 3 pin unversal socket with child safety shutter, Shrouded terminals compatible with all standard mobile chargers, ISI marked for the same board complete all as specified and directed.

M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 2.5 Sq mm single core, including one No. 2.5 Sq mm single core PVC insulated un-sheathed copper cable FRLS as continuous earth wire drawn in and including PVC conduit with all accessories of same grade,concealed on wall/ceiling including terminated in to Modular switch board / Cast iron/pressed steel terminal box 60mm deep of required size made out of 2mm thick MS sheet duly painted both sides with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers for mounting switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type / modular type on the independent board complete all as specified and as directed.

Supply and fixing Socket 16A - 5 pin combined 2 module,(Fabio classic white) shuttered socket (heavy duty) 3 pin unversal socket with child safety shutter, Shrouded terminals compatible 2 ton AC and 3.5KW geyser, ISI marked for the same board complete all as specified and directed.

Supply and fixing Modular switch 1 way 16A, 1 module modular switch fabio classic white series ISI marked switch complete all as specified and directed.

Supply and fixing ceiling rose, 3 phase/PVC/polycarbonate, isolated body type complete all as specified and directed.

S & F in replacement of tube light fitting, with LED batten with polycarbonate housing and integrated electronic drive 1x 22 watts 4 feet twin light mode rechargeble fitting with white acrylic cover along with LED lamp white colour complete including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing of angle holder, insulated body with back plate suitable for angle/ batten fittings including 9 Watt LED bulb complete all as specified and directed.

Supply and fixing and testing of ceiling fan 230 Volt, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) with blades, down rods and connected all accessories complete all as specified and directed.

Supply and fixing of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm i ncluding electric connection from ceiling rose to connecfor with flexible cord twin core twisted copper of size 23/0.0076 and testing including taking out old one unserviceable and depositing to E/M store complete all as specified and directed.

Supply and fixing Modular switch 1 way 6A, 1 module modular switch fabio classic white series ISI marked switch complete all as specified and directed.

S & F DB with sheet metal enclosure 240 volts, 12 way with 200 Amp rated bus bar single pole & neutral double door type for MCBs including mounting work as required in position complete all as specified and directed.

S&F MCB SPN current carrying capacity 40 Amps, 240V, C curve , complete all as specified and directed.

S&F MCB SP current carrying capacity 6-32 Amps, 240V, C curve , complete all as specified and directed.

M&L for Sub Main wiring using FRLS Insulated unsheathed, multistrand copper conductor FRLS PVC cable 2 runs of size 2.5 sqmm for phase and neutral and 2.5 Sq mm for earthing. drawn through rigid PVC conduit of suitable size fixed on wall/ground/Ceiling etc., and complete all as specified and directed. Note: Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour. Two runs of cable for phase / neutral and one run of cable for earth incl conduit will be measured and paid as one unit length.

M&L for Sub Main wiring using FRLS Insulated unsheathed, multistrand copper conductor FRLS PVC cable 2 runs of size 6 sqmm for phase and neutral and 4 Sq mm for earthing. drawn through rigid PVC conduit of suitable size fixed on wall/ground/Ceiling etc., and complete all as specified and directed. Note: Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour. Two runs of cable for phase / neutral and one run of cable for earth incl conduit will be measured and paid as one unit length.

Supply and fixing modular fan regulator, 120W- 2 module regulator electronic step type 230 Volts single phase all as specified and directed.

S & F Energy efficient LED street Light in replacement of Luminaire 35 watts capacity comprises a die-cast aluminium housing including connections with 2 run of 2.5 Sq mm aluminium unsheathed wire multistranded from LT over head line / junction box to the connector of fitting, complete all as specified and directed.

S & F Street light bracket in replacement of made out of GI tubing 32 / 40 mm dia, light grade of approx length 1.2 mtr long bend to shape suitable for security light fittings with necessary MS clamps - 02 Nos with one coat of anti corrosive primer and two coats of aluminium paint including nut, bolt, washers etc complete all as specified and directed.

Supply installation testing and commissioning of solar water heating system with ETC (Evacuated Tube collector) TECHNOLOGY with suitable KW electrical back up as per manufacturer specification suitable for single phase 220 V AC supply complete with ETC type collector, Hot water tank,tank stands etc as per the following specifications. (A) COLLECTOR: Collector 500 LPD ETC type with as per OEM recommended of vertical evacuated tubes, duly installed on angel iron frame, transmittance of cover glass tubes 85%, reflectance of glass tubes more than 85%, absorbance of glass tubes 92%, type of coating (Cu/AI/SS) and reflectance of coating as recommended by manufacturer having wind resistance up to 100 Km with freezing resistance minus 20 deg C and heating up coefficient 240 deg C having average thermal efficiency 58.76% and maximum rise in temp 53.04 deg C (in 24 hours) without night losses fixed at angle of inclination from horizontal as per recommendation of manufacturer. Make of system: INTER SOLAR/SUN MAGIC/BIPIN INDUSTRIES/TATA BP SOLAR/BORO SOLAR/VENUS

Srl item No 139 Contd… (B) HOT WATER TANK: Hot water tank as per OEM recommended ltr capacity with suitable KW electrical back up made out of stainless steel sheet not less than 0.5 mm thick duly insulated with puff insulation 50 mm thick having density mot less than 36 kg having thermal conductivity 0.29 m/k duly covered with PPGI cladding fixed with temperature gauge, inlet and outlet valves of suitable size duly installed on staging fabricated out of MS angle of appropriate size as recommended by manufacturer duly fixed properly and painted with two coats of anti corrosive paint over a coat of red oxide primer complete all as specified and directed.. Note: (i) 5 Nos of spare ETC glass tubes with each system are to be supplied by the contractor with in over all cost quoted. (ii) MS staging and puff insulated water storage tank for cold water, Hot and cold water pipes including valves (to and from system), insulation to pipe and valves to be measured and paid separately. (iii) Any other item required for successfully operaion of system is deemed to be included in overall cost quoted. (iv) System shall be installed and comissioned by authorised rep of firm supplying the solar water Heating system.

M & L for lagging to pipes used in external water supply with 50mm thick bounded mineral wool performed "SNAP ON' pipe section of density 144 Kg/cum confirming IS-9842 with chicken wire mesh wire netting 25mm gause, 20 mm mesh with .01mm aluminium foil cladding to 25mm dia pipe complete all as specified and directed.

M & L for lagging to pipes used in external water supply with 50mm thick bounded mineral wool performed "SNAP ON' pipe section of density 144 Kg/cum confirming o IS-9842 with chicked wire mesh wire netting 25mm gause, 20 mm mesh with .01mm aluminium foil cladding to 20mm dia pipe complete all as specified and directed.

Supply and fixing PPR gate valve as per IS-15801 (brass insert) of size 25 mm dia including connection and testing complete all as specified and directed.Make:- SFMC/SAFE/WEBCON

Supply and fixing PPR gate valve as per IS-15801 (brass insert) of size 20 mm dia including connection and testing complete all as specified and directed.Make:- SFMC/SAFE/WEBCON

M & L for 1000 ltr capacity rotational moulded grade polyethylene (PE) water storage tank which duly stablized with anti-oxidants and compouion and, provides protection heat and oxidation and Cylendrical, vertical with closed top with double layer conf to IS-12701-96 complete including provision of all inlet,outlet,overflow and drain pipe fitting and suitable puff insulated of complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Removing building materials etc. (debris) to a distance of exceeding 5km beyond the lead complete all as specified and as directed. Note: 1. Quoted rates shall including loading, unloading and stacking at the destination. 2. Lorry/ dumpers should not be less than 400 CFT

Notes :- An amount of ` 3,29,434.00 on account of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum

M/S JAN BUILDERS (BID ID -3343189)

M/S GHULAM HASSAN KUCHAY (BID ID -3343007)

M/S MIR SAJAD ENTERPRISES (BID ID -3342467)

M/S B S CONSTRUCTIONS (BID ID -3342489)

M/S M.Y Enterprises (BID ID -3342770)

M/S RAFIQ AHMAD SOFI AND SONS (BID ID -3342478)

ms new dar water star (BID ID -3342374)