TN_323_3

Amount

Earthwork in excavation for foundation trenches of walls,retaining walls, footings of column, steps, septic tank etc. Including refilling (return filling) the quality as necessary after completetion of work, breaking clods in return filling, dressing, dewatering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to Depth of 2.00m below the existing ground level. (a) In ordinary soil.

Providing soling in foundation and under floor with stone/best quantity packed jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials sand if necessary dewatering, complete. (c) Stone soling of thickness 150mm

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately) (a) In prop: 1 cement : 3 sand : 6 coarse aggregate by volume

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc....... a) From primary producer : TATA/SAIL/JINDAL Steel/Shyam Steel/RINL i) Super ductile (SD) TMT reinforcement bars.... a) 12mm dia b) 16mm dia

Providing from work using 2mm pleased bend shuttering plate of Mild Steel and Tubular telescopic steel Prop, including centering, shuttering, strutting and proping etc. Complete. 3.3.1.1. Column, pillers posts & struct of square/rectangular/Polygonal in plain ar any shape like Tee/ L etc. having plane vertical face.

Sides and soffits of beam, beam haunchings, cantilever, griders bressumers, lintels and horizantal ties. (a) For depth not exceding 1.00 M

Flat surfaces such as soffits of suspended floors, roofs, landings and the like.

Providing and laying plain/reinforcement cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding coat of from work and reinfor cement for reinforced.................thick up to plinth level. (I) Using Mixture machine (N) Without using admixture, plasticiser Column, Footing b)M 20 grade concrete or prop. 1:1:5:3

(b) In super structure from plinth level up to 1st floor level. ii) Columns, Pillers, Posts, structs, suspended floor, roof, landing, shelf and support, belcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing.

Brick work in cement morter with 1st class brick including racking outjoints and curing complete as directed. (i) In sub-structure upto plinth level including dewatering if necessary b) In prop. 1:4

Earth/sand filling in plinth in layer not more than 150mm thick including necessary carriage, watering, ramming etc. Complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading

Providing and laying 25mm thick damp proof course with cement concrete in prop. 1:1.5:3 with graded stone agg. Of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacture including curing etc. complete as directed.

1st class brick nogged wall in cement morter including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protruding M.S. Rod/Tor steel of column to be embeded in cement morter and will be measured and paid separately) A) 112mm thick brick wall (a) In cement morter in proportion 1:4 (1 cement : 4 sand)

Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, head and steel base ties ......... Etc. Complete (ii) Size 105mm x 60mm (Single rebate)

Providing, fitting and fixing steel windows and standard rolled steel section as per relevent I.S. Code etc. (a) Openable

Providing, fitting and fixing Steel ventilator (Openable) of standard rolled steel section as per relevent I.S. Code.

65mm thick cement concrete floor consisting of 50mm layer of cement concrete in prop. 1:3:6 (1 cement sand : 6 coarse agregate of 25mm and down) and 15mm thick wearing layer in cement concrete in prop. 1:1:2........................................complete as directed.

15mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side c) In cement morter1:4

B) On fair side b) In cement morter 1:4 Inside Class Room

Providing and fixing flush shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels.....etc. Complete. (b) Decorative type face ply wood panel and block board core. (i) 35mm thick

Providing plinth protection with bricks flat laid in cement morter 1: 4 and finished with 15mm thick cement plaster in prop 1:2 with a floating coat of near cement finish.

Providing drain with brick work in cement morter in prop. 1:5 with half brick thick side wall and 100mm thick C.C. (1:3:6) bar over one brick flat soling incl. 15mm thick cement plastering..........etc. (i) 300mm wide and average 250mm deep.

Pre-Construction anti termite at the bottom of foundation pits and walls on either on either side upto a hetght of 300mm from bottom of the excavation made for colume, plith beam. A) With aqueous emulsion having concentration 1:19 with .

Pre-Construction anti termite treatment in the back fill in immediate concrete with the foundation structure after completion... A) With aqueous emulsion having concentration 1:19 with..

Pre-Construction anti termite treatment by applying in the entire levelled area plinth filling and before laying floor by applying a) With aqueous emulsion having concentration 1:19 with.....

Pre-Contruction anti termite treatment by applying in the junction of walls, colum, with the floor before laying floor and after operation of item No.26.1.3 above making....... A) With aqueous emulsion having concentration 1:19 with.......

(c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after through brushing the surfaces free from morter droppings......etc. Complete.

(f) Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on new wall surface to give an even shade... Etc.

Finishing old/new wall with warter proofing weather coat smooth anti fungal preminum texrured exterior finished of sandex matt brand of snowcem Indian Ltd. Of required shade after clearing and cleaning the surface etc. Complete.

Const. of Urinal & Latrine: Earthwork in excavation for foundation trenches of wall,retaining walls, footing of columns, steps, septic tank etc. Including refilling etc. Complete. (A) Up to Depth of 2.00m below the ground level. (a) In ordinary soil.

Providing soling in foundation and under floor with stone/best quantity packed jhama brick, sand packed and laid to level and in panel after preparing the sub-grade as directed. (a) Brick on flat soling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32 mm in foundation bed for footting steps, walls, brick works etc. as directed and specified. (a) In prop 1:3:6

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details etc. Complete.

Providing from work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, struttingg and proping etc. 3.2.1.1 Columns, pillers, posts & structs of square/rectangular/Polygonal.

3.2.1.2. Sides and soffits of beam, beam haunchings, bressumers, lintels etc. (a) For depth not exceding 1.0 M

Providing and laying plain reinforcement cement concrete works cement coarse sand 20mm down graded stone aggregate including dewatering if necessary and curing complete. (A) In sub-structure up to plinth level :- Foundation, footing, columns with base, tie and plinth beam etc. (N) Without using admixture, plasticiser. b) M20 grade concrete or 1:1:5:3

(b) In super structure from plinth level up to 1st floor level. ii) Columns, Pillers, Posts, structs, suspended floor, roof, landing, belcony, lintel (N) Without using admixture, plasticiser. a) M15 grade concrete or 1:1:5:3

Brick work in cement morter with 1st class brick including racking outjoints and curing complete as directed. (i) In sub-structure upto plinth level including dewatering if necessary b) In prop. 1:4

Earth/sand filling in plinth in layer not more than 150mm thick including necessary carriage, watering, ramming etc. Complete as directed and specified. @ With river silt (Predominantly non plastic) by truck carriage including loading and unloading.

1st class brick nogged wall in cement morter including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level etc. Complete. (A) 112mm thick Brick wall :-

Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns/ stiffeners/ walls with necessary holdfast / sleeves etc.as specified and directed at all levels.

Providing, fitting and fixing 24mm/29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necy. Hinges, screws, bolts etc. As specified and directed. B) 20mm thick.

Providing and fixing in position collapible with vertical chennels 20mm x 5mm x 2mm braced with flat iron diagonals 20mm x 5mm size with top and bottom rails of T-iron 40mm x 40mm x 6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

Providing , fiting and fixing M.S. Grill of required pattern for windows/ clerestory windows/ opening with M.S. Flats at required spacing in frame all round square or round M.S. Bars with round headed bolts and nuts or screws. (I) Plain grill

Providing fitting and fixing steel windows/ ventilators (Openable) of standard rolled steel section as per relevent I.S. Code-10383 joints mitred and welded with 15mm x 3mm x 100mm lung embeded in cement concrete block of M10 grade etc. Complete.

Providing, fitting, hoisting and fixing of roof trusses including purlin fabricated using MS circular hollow section conforming to relevent IS code, as per approved design and drawings including providing M.S. Cleats, base plates, bolts and nuts and one coat red oxide Zinc Chromate primer and two coats of approved enamel paints complete. a) TATA make Circular Hollow section (CHS) of grade YST-310 conforming to I.S. Specification:1161-1998. 60.30 O.D. Pipe :-

Providing prepainted galvd . Iron sheet (PPGI) roofing etc. (Dyna roof/Sathyam/Dura/Kolor/Century wells etc.) (iv) 0.60mm thick :-

Providing prepainted galvd. Iron sheet (PPGI) accessories (Ridges/Valley/Gutter/Flashing ) (Dyna roof/ Sathyam/Durakolor/ Century wells) at all levels etc. Complete. (iv) 0.60mm thick :-

15mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (A) On rough side :- b) In cement morter 1:4

(B) On fair side :- b) In cement morter 1:4

Plain cement concrete floor base in prop. 1:3:6 laid in alternate bays as specified with coarse agg. Of size 13mm to 32mm including dewatering if necessary and curing complete. B) 50mm thick

Providing vetrified floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floor etc. Complete. A) Normal range (Somany / Orient / Nitco / Vermora / Johnson make. (i) of size 400mm x 400mm and above A) On Floors :-

Providing vetrified floor tiles of approved quality of specified size, shape and thickness not less than 8mm on walls and skirtings etc. Complete. A) With Fix-A-Tile(Choksey / Sikla / Pedelite / Rouf / White cement slurry etc. (i) of size 300mm x 450mm and above a) On Walls :-

Providing and fixing clear sheet glass beded in putty and fixed with/without wooden beading including necessary cutting and glass to be required sized (1) Area of glass panes not exceding 0.15 Sq.m. (a) 3.00 mm thick.

Providing plinth protection with bricks flat laid in cement morter 1: 4 and finished with 15mm thick cement plaster in prop 1:2 with a floating coat of near cement finish.

Providing drain with cement concrete (1:3:6) 10 cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with shuttering for sides etc. As specified. i) 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm.

Providing precast R.C.C. Slab over drain-spetic tank etc. In prop. 1:2:4 providing with 10mm M.S. Bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering, curring etc. Complete including fixing in position as directed. b) 75mm thick slab.

Painting two coats (Excluding primary coat) on new steel and other metal suface with enamel paint etc. Complete.

Wall painting (Two coats) with plastic emulsion paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J& N paint/Nerolac) on new surface to give an even shade after thoroughly brushing the surfaces free from morter droppings and other foreign matter and sand papered smooth. (a) Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/J & N Nerolac)

Finishing old/new wall with warter proofing weather coat smooth anti fungal preminum texrured exterior finished of sandex matt brand of snowcem Indian Ltd. Of required shade after clearing the surface etc. Including scaffolding complete as directed at all levels (Two coats).

Providing, fitting and fixing vitreous water closet squatting pan (Indian type W.C. Orissa pattern) with all fittings and fixures complete etc. 1.1.1. Indian type W.C. Orissa pattern of size 580mm x 440mm a) White i) Perry ware make

Supplying, fitting and fixing PVC flushing cistern with all internal fittings with C.I. bracket including fiting and fixing standard size CP flush pipe, union clamp etc. As directed and specified. i) Parry ware make a) White (i) Economy single flush (Cat No. C8090/C8055)

Providing, fitting and fixing vitreous china flat type lipped front urinal basin with standard flush pipe and C.P. Brass union etc. A) Parry ware make (a) White (iv) Flat back (Cat. No. C0501/72

Providing, fitting and fixing vitreous china sqatting plate urinal with authomatic flushing cistern with standard flush pipe and C.P. Barss speader and brass union etc. Complete. A) Parry ware make (a) White (Cat. No. C0503)

Supplying, fitting and fixing PVC pipe of 6kg/cm2(Supreme/Prince) or other ISI approved including joining, fitting and fixing with clamp etc. As necessary complete. (a) In expose surfaces or in trenches (iii) 90mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend (Supreme/Prince) or other ISI approved including joining, fitting and fixing with clap etc. As necessary complete below G.L. As specified and directed. (a) In expose surfaces or in trenches (iii) 90mm dia.

Supplying, fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. As necessary complete at all levels below G.L. As specified and directed. (a) In expose surfaces or in tranches (iii) 90mm dia

Providing, fitting and fixing PVC Cowel of ISI make complete as directed & specified. (iii) 90mm dia PVC Cowel of ISI make.

Providing, fitting and fixing CI Iron grating to the floor complete as directed & specified. (b) 75mm dia

Providing, fitting and fixing 450mm dia 90mm thick man hole cover and frame of 58 kg. Weight complete as directed and specified.

Construction of filter bed in soak pit including earth work in excavation of soil and then filling up to the trench with brick bats covered with plain sheet above brick bats filling etc. Complete.

Supplying, fitting and fixing approved PVC pipes of different sizes with all necessary "R" brand or similar approved PVC fittings such as bend , tee, elbow G.L. As specified and directed. (A) In expose surfaces or in trenches (Supreme / prince / SFMC brand or other equivalent brand. b) 40mm dia

c) 32mm dia

d) 25mm dia

Supplying fitting and fixing C.P. Bib cock 15mm dia of approved brand as directed and specified . (II) Jaquare make (a) Continental /Clarion (i) Standard

Providing Vitreous china wash basin with C.I/MS brackets C.P. brass chain etc. 1.13.1. PEDESTAL BASIN (With Pedestal) a) Parry ware make b) White i) Duke 660 x 495 (Cvat No. C8416/27) White/coloured)

Raising low site around the Bldg. With approved soil obtained from outside by truck carriage including breaking clods dressing etc. Complete including paying necessary land compensation municipal gate fees etc. Complete as directed. (ii) Other than Guwahati Municipality Area.

Installation of Electric works: Wiring for light/ fan/ cell bell point with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistand ) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/ RR Kabel/ Nicco/ Anchor or Equivalent make as approved by the Deptt.) with flat 19mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/ Polycab/ MW ORequivalent make as approved by the Deptt.) in surface system, including 6 amp flus type switch/ bell push (Anchor Penta/Goldmedal/ Kolor kany. Kom/ Havells or equivalent make as aproved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover, ceiling rose (Anchor/Gold medal/ Kolor kany. kom/ Havells or equivalent make a approvd by the Deptt.) etc. complete as directed and specified by the Deptt. Short point up to 3.00 metre. lenght.

Medium pointup to 6.00 metre. lenght

Long point up to 10.00 metre. lenght.

Wiring for drawing sub-main line with P.V.C. Insulated core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1000 volts (Finolex/ RR Kable/ Nicco/ Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG/ Precious / Presto Plast/ Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. With 2x 2.5 sq. mm. +earth continuity with 1x1.5 sq. mm. in flat 19mm ISI marked casing 'n' capping system.

With 2 x 4 sq. Mm. + earth continuity with 1x2.5 sq. Mm. Cable in flat 19mm ISI marked casing 'n" capping system.

Wiring for 5 pin amp plug with 1.5 sq mm P.V.C. Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS - 694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel/ Nicco/ Anchor or Equivalent makes as approved by the Deptt.) including providing & fixing 5 pin 6 amp socket outlet (Anchor penta/Gold medal/Kolor kany. kom/Havells or equivalent make as approved by the Deptt.) make.) and 6 amp flush type switch (Anchor penta/ Gold medal / Kolor kany.kom/ Havells or equivalent make as approved by the Deptt.) make) earthing the 3rd pin of the socket as required on the switch board in surface/recessed ISI Marked hot dip galvanised pipe wiring system. when fitted on same board of light and fan.

Supplying and fixing of batten holder (Anchor Penta PC CHERRY/ gold medal / Kolor kany. Kom/ Havells or equivalent make as approved by the Deptt.) including connection as approved by the Dept.) as required without Lamp

Supplying with fitting and fixing sheet steel, phospatised, powder painted single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. Complete with making necessary connection as approved, specified and directed by the deptt. 12 way SPN single door

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series 6A to 32A

Supplying, installation & testing of G.I. Earth station with perforated 40mm dia and 4.50 metre long heady duty G.I. Pipe with necessary 40mm dia G.I. Fittings such as Socket, Tee, elbow, nipple and 50mm x 40mm G.I. Reducing socket for funnel including locking arrangement 300mm x 300mm x 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

Extra for using salt (5 K and Charcoal (64 K in pipe earth station pit to provide low impedence ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG Copper earth from Earth Eletrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as aproved, specified and directed.

Supplying including fitting and fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. Of following sweeps with making necessary connection as approved by the Deptt.) as required complete and as directed by the Department [Without regulator]. Premium model 1400mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200mm Sweep SS-390 Deco havells make)

Supplying fitting and fixing of ceiling fan regulator including connections etc. Complete as required. Electronic type.

Supplying including installation, testing and commissioning of different type of LED LUMINARIES as directed an specified by the department.SM440L 15xLED-HB/RD 24V CQC, CE VAYA COVE MONO, RGB, 0.3 M CQC/CE/UL TRADE PACK

Supplying and fixing of Jaquar or equipment Philips/ Wipro LED wall light fittings complete with shade, back plate including conncection cable, as approved by the Deptt.s etc. As required. LED Bulk Head 8W

Linear LED Tube 6W

Supplying and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance standard conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminum strip, Galvanised for cables up to 2x10 sq mm. 3x10 sq mm, 4x6 sq mm balance all galvanised steel strip), extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908 (Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trence up to depth of 75cm, refilling, protective brick covering, sand cushionin etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ havells/ RPG/CCI/Polycab/Gloster/Finolex make). 2 Core A2XWaY A2XFaY 16.00 Sq. mm 2 Core armoured U.G. cable

MEERA DAIMARI