Providing 02 Nos of 11kV MCVCB Switchgear for load bifurcation at 220/66/11kV Receiving Station, Chitradurga KPTCL Including Supply of Equipments/Materials, Erection (Including Civil Works), Under Partial Turnkey Percentage Tender Basis, (Excluding the Major Materials Such As Switchgears Will Be Supplied by KPTCL) Testing & Commissioning & other allied works

Providing 02 Nos of 11kV MCVCB Switchgear for load bifurcation at 220/66/11kV Receiving Station, Chitradurga KPTCL Including Supply of Equipments/Materials, Erection (Including Civil Works), Under Partial Turnkey Percentage Tender Basis, (Excluding the Major Materials Such As Switchgears Will Be Supplied by KPTCL) Testing & Commissioning & other allied works

Copper control cable 19 X 2.5 sq.mm

11kV, 3Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS7098 (Part2) Armouring wires dia and Resistivity as per IS397 (from Switch gear panel to 11kV DP Structur...

11kV Heat shrinkable type cable termiantion kits suitable for 3 X 400 sq.mm XLPE cable (Indoor type)

Heat shrinkable type cable termiantion kits suitable for 3 X 400 sq.mm XLPE cable (Outdoor type)

DP Set (2 Pole Strucrure Kit) as per IS-1977 RCC Pole 9 Mtr Long,145 Kg WL

11 kV Ceramic Pin Insulator (Shell only)

9 kV, 5kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR

DP Set For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole 9 Mtr Long, 300Kg WL-GI

11 kV, 400 Amps Special Roaster GOS

HFrame Set for fixing 11kV, 400 Amps Single Break GOS (For DP structure for providing New GOS for sectionalisation)-GI

Supply of Danger / Caution Plates

Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron weldi...

SCADA integration Multi Function Transducer KPTCL and Fixing and wiring of MFT

8 Channel 110 V Opto Coupler and Fixing and wiring of Opto Coupler.

Copper control cable 4x4 sqmm for CT termination. KPTCL

Copper control cable 4x2.5sqmm for PT termination.

Signal cable Armoured Copper 10C x 0.5 Sq mm multistrand (2 runs - 1 run for MFM and 1 run for DI) (between CandR panel to RTU panel) and Laying and termination of DI/DO/Communication Cables

Control control cables 10C x 1.5 Sq mm multistrand, conforming to KPTCL specification (between CandR panel to RTU panel) KPTCL and Laying and termination of DI/DO/Communication Cables

Erection, alignment and fixing to the foundation, indoor/outdoor 11 kV switchgear panel/unit including movement from the point of unloading to the point of erection

Announciator panel Erection, assembly, alignment and interpole wiring of breakers with its connected equipments including movement from the point of unloading to the point of erection. 11kV Kiosk

Assisting in Testing and Commissioning.(b)(i)and(ii)(including annuciator panel)

Laying of control cables from equipment to control panels.

Laying of 11kV XLPE 3 X 400 sq.mm UG cable.

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr dept.

Fixing of 3 Nos Lightning Arrestor including wiring.

Fixing of heat shrinkable pot heads for HT cable.

Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded around the pipe using cast iron weld...

Grounding of equipment with 50 x 6 mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...

Supplying and providing 450 mm dia 450 mm height 1.5 to 2 thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,

Loading of Cement or Steel by Manual Means and Stackin

Unloading of 11kV switchgear

Loading of 3X240Sqmm UG cable and Copper control cable, of Cement or Steel by Manual Means and Stackin.

Unloading of 11kV switchgear, 3X240Sqmm UG cable and Copper control cable etc.

Transportation of CT ,PT's Breakers CandR panels 11kV switchgears and EHT LA's Using 10MT lorry From Davanagere TLandSS Store to 220/66/11kV R/s Chitradurga R/s as per KPWD SR P-85 Sl No.1.4

Erection of 2 Pole Structure using RCC/PSCC Pole 9 to 10 Mtr long

33 SCADA integration Multi Function Transducer (MFT) and Fixing and wiring of MFT No 1 1555 1555.00

8 Channel 110 V Opto Coupler. and Fixing and wiring of Opto Coupler.

Copper control cable 4x4 sqmm for CT termination.

Copper control cable 4x2.5sqmm for PT termination.

Signal cableArmoured Copper 10C x 0.5 Sq mm multistrand (2 runs - 1 run for MFM and 1 run for DI) (between CandR panel to RTU panel) and Laying and termination of DI/DO/Communication Cables

Control control cables: 10C x 1.5 Sq mm multistrand, conforming to KPTCL specification (between CandR panel to RTU panel) and Laying and termination of DI/DO/Communication Cables

Configuration of RTU and Engineering along with validation of data at SLDC.

Welding, drilling,cutting etc

Testing and Commissioning:Wiring: Identification of wires, ferruling, crimping andtermination of wires for annunciation, etc.,Testing of relays, CTs, PTs and Breaker for operation.