Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹43.2 LAccepted-AOC 10 1 GROUND FLOOR WEST GHOSH PARA JAGATDAL JAGATDAL JAGATDAL NORTH 24 PARGANAS WEST BENGAL 743125 | 24 PARAGANAS NORTH | WEST BENGAL | 743125 | 1 | Accepted-AOC L1 BIDDER | |
| 2 | 2₹45.6 L+₹1.9 L (4.34%)Rejected-Finance 0 GANGARAM DHARMKANTA TRUCK UNION JIROTA KALAN DAUSA DAUSA RAJASTHAN 303303 | DAUSA | RAJASTHAN | 303303 | 2 | Rejected-Finance Not L1 Bidder | |
| 3 | 3₹45.9 L+₹2.1 L (4.86%)Rejected-Finance | 3 | Rejected-Finance Not L1 Bidder | |
| 4 | 4₹46.0 L+₹2.2 L (5.10%)Rejected-Finance | 4 | Rejected-Finance Not L1 Bidder | |
| 5 | 5₹46.1 L+₹2.4 L (5.38%)Rejected-Finance 1 12F GOPAL CHANDRA BOSE LANE KOLKATA 700 050 | KOLKATA | KOLKATA | WEST BENGAL | 700050 | 5 | Rejected-Finance Not L1 Bidder |
Tender Value
₹43.3 L
EMD Value
₹86,600
Closing Date
8 Mar 2021, 6:00 pmClosed
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
PROVISION OF CERTAIN LBW SPECIAL REPAIRS AND REVENUE WORKS AT VARIOUS LOCATIONS UNDER GE NORTH KOLKATA
2021_MES_422469_1
8055/20-21/E8/GE/N/KOL/ / 2020-21
Open Tender
Miscellaneous Works
Item Rate
180 days
SALT LAKE
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE NORTH KOLKATA
₹86,600
Yes
12 Mar 2021
15 Feb 2021
9 Mar 2021
16 Feb 2021
8 Mar 2021
1 Mar 2021
Amount
Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling,louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and as directed.
Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 01 here in before by wire brush including scrapping & cleaning with emery paper and washing down with water as required and applying “Solvent free epoxy concrete bonding agent” as per manufacturer’s instructions on old concrete surfaces for bonding with new concrete complete all as specified and as directed. Note :- Cost of chemical i.e. Solvant free epoxy, and cement shall be measured and paid separately under appropriate item here in below. (ii) The work shall be carried out by the trained person as per manufacturer's instructions i.e. FOSROC /SIKA / PIDILITE .
Supply only. Solvant free Epoxy concrete bonding agent. Make : Nitobond EP of FOSROC/Carbodur of SIKA/ or equivalent in PEDILITE
Material and labour for providing reinforced cement concrete (1:1½: 3) type A0 (using 12.5mm graded stone aggregate) mixed with integral water proofing liquid admixture as per manufactures instructions as in columns, pillars,lintel, slab supported walls roof, landings, balconises, canopies, deck slabs and in shelves etc including necessary form work complete all as specified and as directed.
All as per item No. 04 above but in Chajja, facia, railing and parapet etc (Note for item No 04 & 05 : Integral water proofing compound shall be measured and paid separately).
Material and labour for 5 mm thick rendering in CM (1:3) on concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.
All as per item No.6 above but in ceiling.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water , etc.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.
Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L for Rendering 15 mm thick in CM (1:6) on fair faces of brick/concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and a directed.
M&L for Rendering (15+5)mm thick in CM (1:4) on fair faces of brick/concrete wall surfaces, finished even including mixing integral waterproofing compound.(WPC measured and paid separately)
M&L trowelled coat neat cement finished with 3.0 Kg of cement per sq. metre
Demolition of cement concrete in ground floors and pavings n.exc. 15cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in pavement/plinth protection,plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) surface finished fair and even complete all as specified and as directed. Make for bitumene:- STP / TikiTar / Chosky Chemicals.
M&L for (300x300) x25 mm thick PCC designer Pre-polished tiles (Factory made and approved size) as in floors, set & jointed in neat cement slurry and pointed in coloured cement with pigment over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed. Make:- Ultra tile / Anjali tiles / Nitco / Mehatab / Terra firma / Ecco scope./ M/S Stylish Precast Pvt ltd.
M&L for 75mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in floor finishes and pavings.
M&L for 50mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in floor, finished fair and even, etc complete. all as specified and directed.
S&F Vitrified Ceramic tiles 10 mm thick(square/rectangular)polished area of each tiles exc 0.36 sqm but n exc 0.42 sqm in floor/dado setc and jointed in neat cement slurry and pointed in white or coloured cement to match in light shade including screed bed 15mm thick in CM 1:6 all as directed. Make:- :-Somany / Asian Granito / Nitco / orient / Kajaria / varmora Granito Pvt Ltd.
Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.
Material and labour for glazed ceramic colour tiles 300x200 x 7mm thick as in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. Make:-Somany / Asian Granito / Nitco / orient / Kajaria / varmora Granito Pvt Ltd.
Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.
Taking down Chowkats or frames not exc. 1.5 sq. m but with shutters (without taking off shutters from the frames) each
Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.
Supply and fix 35mm thick 2nd class hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed. Specie for item Nos. 24 & 25:- Sal / Bijasal / Benteak / Laurel/ Hollock , Chikrassy/, Gamari /, badam / kalasiris. Make for item Nos. 24 & 25:- M/s Ambika timber Works, Bikna (Patel Nagar), P.O. Keshlakole, Bankura, W.B./ M/s Premier Wood Craft (P) Ltd., Jessore road, P.O. Ganganagar, Dist – 24 Parganas( West Bengal) / Door kings, Kolkata / Jain Doors PVT Ltd / M/s Supreme Doors and allied products.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing
S&F Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. Make for item Nos. 26 & 27:- M/s Rajshri Plastiwood,/ Kumar Arch Tech Pvt Ltd, M/s Sintex India Ltd,/ HINDOPAN,/ Marino / Polyline.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 200 mm long.
S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 100mm long
S&F Aluminium handles, cast type, anodised 100mm long. Make for item Nos. 28 to 30:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag.
S&F Stainless steel butt hinges 100 mm long. Make:- Prayag / Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset..
M&L anodised aluminium frame work for partitions, doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified.
Supply and fix aluminium anodised glazed or gauged shutter for sliding window with aluminium channel section weighing not less than 0.55 kg per sqm including aluminium channel,including all necessary fittings such as rollar, joining cleats, glazing clips, rubber packing aluminium screw as required etc complete all as specified and as directed. (Note:Wiremess/ glass shall be measured and paid separately) . Make for item Nos. 32 & 33:- Jindal / Hindalco / Indalco.
Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed. Make:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyam metallics and energy ltd / Jindal.
S&F Sheet glass ordinary quality in squares n.exc 0.50 sqm each pane 4mm thick, glazing with oil putty or glazing clips all as directed. Make:- Saint Gobain, Modi Float, Triveni Float Glass, Crown, Prayag polymers, / Pilkington Glass
Material and labour for applying two coats of synthetic enamel paint, first quality, over a coat of red oxide zinc chrome primer to new steel surface, not otherwise described, over 10cm width or girth including preparation of new surface complete all as specified and as directed.
M&L for preparation new plastered surfaces of wall and applying wall care putty and applying two coats of oil bound distemper, first quality, over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of weather coat paint, first quality, over a coat of primer complete all as specified and as directed.
Complete removal of existing treatment of wall including washing, rubbing down and stopping of old treatement and material and labour for applying birla wall care putty and appling two coats of oil bound distemper, first quality, over a coat of alkali resistant primer to wall complete all as specified and as directed.
Material and labour for complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement and applying two coats of weather coat ( acrylic emulsion paint), first quality, over a coat of cement primer complete all as specified and as directed. Make for item Nos. 36 to 40:- Asian / Berger / Jenson & Nicholson / Shalimar.
Taking down pelmet boxes and supply & fix Decorative /Fency type curtain rods of not length exceeding 1.25 m but not exceeding 2.0 m of Aluminium /brass alloy suitable of 20 mm dia alongwith fancy brackets and nec fixtures complete all as specified and directed. Make:- Unique Décor Marvel / Vista /Lavolor / Mac Decor.
Taking up or down 20 mm dia / bore, steel tubing and connections, segregating serviceable pipe complete all as specified & directed.
All as per item No.42, above but 15 mm dia / bore.
S&F 15 mm dia Steel water tubes, 'medium grade' ,galvanised , with all fittings ; and fixed complete to walls and ceilings or laid in floors including wrapping bitumen cloth for conceal lines, including testing, all as specified and as directed.
S&F 20 mm dia Steel water tubes, 'medium grade' ,galvanised , with all fittings ; and fixed complete to walls and ceilings or laid in floors, including testing, etc complete. Make for item Nos. 44 & 45:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal / Nezone / M/S BST Infratech Ltd.
M&L Cast iron floor trap ,with grating including jointing to waste pipe fixed in cement concrete B1(1:2:4) dia 50mm. Make:- AMC / ICC / Hepco / PIC / BIC / SON/ Jayaswal Neco Industries LTD
S&F CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe, fixed in repairs.
Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.
S&F stop valves cast copper alloy 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, fixed as in repairs. Make for item Nos. 48 & 49:- Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) / Prayag.
S&F PVC connections 15 mm size with PTMT nuts of length 600mm. Make:- Prayag /Polytuf / Supreme / Prince / Reliance /
S&F in repairs Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed in repairs. Make:- Neycer Kermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag
S&F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union.
S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white ( excluding fixing bolts, flushing cistern and flush pipe) fixed in repairs
S&F in repairs Waste fittings,32mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed. Make for item Nos. 52 to 54:- Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) / Prayag.
Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm,conforming to IS, fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fix in repair PVC Multy Utility Mirror Cabinets of size 355mmx455mm complete all as specified and as directed. (Make:- : Polytuf /Prayag / Parryware/ Hindware / Cera/ )
Supply and fix in repairs UPVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and as directed.
Supply and fix in repairs UPVC bend/shoe 110mm dia all as specified and as directed. Make for item Nos. 58 & 59:- Prayag /Polytuf / Supreme / Prince / Reliance / Jain pipes / Finolex. / Kisan / M/S Fusion Industries LTd
Demolition of cement concrete of any description and in any position provided as in roof padding, roof curb etc complete all as specified and as directed. Note: - (a) Demolition to roof slab should be done carefully . (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Debris/retrieved materials shall be disposed off out of MoD land as directed by the Engineer- in- charge.
Mterial and Labour for providing plain cement concrete 1:2:4,type B1 using 20mm graded aggregate as in roof padding over RCC slab,laid in slope as per requirement, mixed with integral water proofing liquid admixture as per manufacture's instructions complete all as specified and as directed. Note :- (i) Average thichness of PCC shall be 50 mm (ii) Integral water proofing liquid admixture shall be measured and paid seperately under appropriate item here in after.
Material and Labour for water proofing treatment with APP based standared membrane over PCC padding of roof with the following courses of treatment :- (a) Apply bituminous primer (IS-3384)@0.40kg/Ltr per sqm of the surface area,as per including cleaning the surfaces and all as specified.(Make of primer:-Pibial primer of TEXA or equivalent product of BITUMAT/BITUNIL/SIKA) (b) Apply APP plastomeric bitumen based water proofing membrane polyester reinforced (4 KG /Sqm)with 10 cm over laps and torch bonded at joints including surfacepreparation before and after application of treatment as per manufactures instruction complete all as specified and as directed. (Make of APP Membrane to Moply FP 4 kg mineral of TEXA/WP Shield 103 PM of SIKA or Eqiuivalent material of BITUNIL/ BITUMAT/ STP / IWL Chennai.)
Supply only Integral waterproofing liquid compound as per IS 2645. (MAKE:- CONPLAST WL of FOSROC, PLASTIMENT 2001 NS of SIKA, or Equivalent makes.
Supply and fix in repair Rotational moulded polyethylene water storage tanks (Triple i layer) 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. Make:-Rotex / sintex, Polywel / SPL / Polycon / Diplast / Nilkand / Oriplast / Jindal Jaipur
Supply and fix 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod 7 high density plastic ball screwed for iron pipe complete all as specified and as directed.
Supply and fix Gun-metal, globe or gate valves size 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make for item Nos 65 & 66:-: KALPANA /Upadyaya/ RMCO/ Veenus / Zoloto / Leader.
Dismantling boarding any description fixed in any position with nails etc. complete all as specified and as directed.
Dismantling Asbestos Cement /transluscent ( corrugated, semi corrugated etc) sheet in roof covering, wall, ridge, hips valleys and flashing etc.for the building structures not exceeding 10m height from the average ground level , complete all as specified and as directed.
Supply and fix GI frame work for non seamless ceiling comprising for GI perimeter channel of 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to sorrounding wall using nylon sleevless and screws at 450mm centre to centre /intermediate suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteness with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm including suspenders / hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including taking down complete all as specified and as per manufacturers instruction. Make:-M/S RR Ceiling Product / Armstrong / India Gypsum / Lafarge / Gypstone / Saint Gobain / Everest.
Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed. Make : Everest/Rhino/Charminar.
Supply and fix pre-painted galvalume zinc coating GI based corrugated steel sheet 0.45mm thick (base metal thickness) of any colour having tensile strength of 550 MPA as in roof covering,fixed with using hot dip galvanised self drilling and self tapping screws complete all as specified. Make of galvalume sheet -M/s Tata Bluescope Steel Ltd (colorbond steel) or equivalent in M/s JSW Steel Ltd/M/s Ispat Industries Ltd/M/s Bhusan Power & Steel Ltd Note: Sheet shall be coated with hot dip alloy of 55% aluminium 43.50% zinc 1.50% silicon,and finished with resin coat on both surfaces @ 150gm/sqm of coating (total both surfaces) complete all as specified and as directed.
All as per item No. 71 above, but all as in ridges , width 60 cms, etc complete.
Supply and fix in repair rolled section of grade Fe-410 W (Gde E-250) quality A as in main and cross beams hip and jack rafters, purlins where conneced to common rafters and running rails and fixed with angle cleats or other connecting plates by welding complete all as specified and directed. Make:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyam metallics and energy ltd / Jindal.
M&L Powder coated aluminium frame work for partitions, doors, windows( 3 Track) , ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified.
M&L Powder coated Anodised alminim window( glazed or gauged) and ventilator shutters, sliding type without sash bar, aluminim section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. Make for item Nos. 74 & 75:-Jindal / Hindalco / Indalco.
S&F in repairs 12 mm Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with to aluminium frame work. Make:- Kitply,/ Bhutan board / Ecoboard / Nepal board / Archid ply / Merinova / M/s Green Ply Industries Ltd / Eco-board / Archid Lam / Century Lam / Shirdi Industries Ltd (ASIS)
S&F Sheet glass ordinary quality in squares n.exc 0.50 sqm each pane 4mm thick, glazing fixed with rubber beading all as directed. Note : rubber beading is inclusive of rates no separate measurement shall be paid. Make:- Saint Gobain, Modi Float, Triveni Float Glass, Crown, Prayag polymers, / Pilkington Glass
Refixing of shutters of any description exceeding 1 Sqm each and not exceeding 2 Sqm with old serviceable builders hard ware articles / with new builders hard ware articles if any. (Note : (i) New builders hard ware articles shall be paid separately under “Supply only item. (ii) Old serviceable shutter obtained from item No 68 shall be reused).
Labour only for Resecuring or easing and adjusting without taking off shutters of any description not exc 1 sqm each complete all as specified and as directed.
All as per item No 79 but exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed.
Supply and fix 2nd class hard wood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. Specie:- Sal / Bijasal / Benteak / Laurel/ Hollock , Chikrassy/, Gamari /, badam / kalasiris. .
Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.
Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.
Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset..
Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.
Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed. Make for item Nos. 85 to 87:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag.
Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed
S&F Vitrified Ceramic tiles 10 mm thick(square/rectangular)polished area of each tiles n exc 0.36 sqm in floors/dado etc and jointed in neat cement slurry and pointed in white or coloured cement to match in dark shade including screed bed 15mm thick in CM 1:6 all as directed. Make:- Somany / Asian Granito / Nitco / orient / Kajaria / varmora Granito Pvt Ltd.
Material and labour for two coats of synthetic enamel paint, first quality, over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.
Material and labour for applying one coat of synthetic enamal paint, first quality, to wooden surface exceeding 10cm widht or girth including preparation of old painted wooden surfaces complete all as specified and as directed.
Preparation of old painted steel surface of any description over 10 cm width/girth and applying 1 coat of synthetic enamel paint, first quality, complete
Material and labour for complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement and applying two coats of oil bound distemper, first quality, over a coat of alkali resistant primer to walls etc complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper, first quality, over a coat of alkali resistant primer complete all as specified and as directed.
Material and labour for complete removal of existing treatment on old plastered surfaces of walls including washing,rubbing down and stopping of old treatment and applying two coats of cement based paint, first quality, complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint, first quality, complete all as specified and as directed. Make for item Nos. 90 to 96:- Asian / Berger / Jenson & Nicholson / Shalimar.
S&F in repairs Curtain Rod Aluminium body Decorative pattern 20 mm dia medium duly colour as approved by GE
S&F in reparirs Curtain Rod Bracket decorative type Make:- for item Nos. 97 & 98:- Unique Décor Marvel / Vista /Lavolor / Mac Decor.
Excavating trenches not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation and getting out as in Soft/loose soil complete all as specified and as directed .
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick , including watering ,ramming complete all as specified and as directed .
Spreading and levelling in layers n exc. 25 cm thick , well ramming including watering as required soils obtained from item No 01 complete all as specified and as directed .
Material and Labour PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling complete all as specified and as directed .
Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.
Material and Labour for sand filling under floor including watering and consolidation complete all as specified and as directed .
Material and Labour for hardcore with broken stone or boulders n.exc 63 mm gauge , deposited , spread in layer n.exc 15 cm thick , watering and ramming to a true surface complete all as specified and as directed.
M&L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor, finished even and smooth without using extra cement, etc complete. all as specified and directed.
Material and Labour 6 to 10 mm mild steel bar for reinforcement in available length Fe-290 (grade E-165) complete all as specified and directed. Make:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyam metallics and energy ltd / Jindal
Material and Labour for 20 mm thick rendering with CM 1:4 in two layer , 10 mm thick in each layer and mixed with integral water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finish the surface even and fair complete all as specified and as directed Note:- ( Water proofing liquid admixture shall be measured and paid seperately )
Material and Labour for 20 mm thick rendering with CM 1:4 in two layer , 10 mm thick in each layer and mixed with integral water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finish the surface even and fair with extra floating/setting coat complete all as specified and as directed. Note:- ( Water proofing liquid admixture shall be measured and paid seperately )
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250 mm long.
S&F Aluminium handles, cast type, anodised 150mm long, fixed with aluminium screws, etc complete. Make for item Nos. 110 & 111:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag
Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including hacking out old broken glass from metal frame complete all as specified and as directed. Make:- Saint Gobain, Modi Float, Triveni Float Glass, Crown, Prayag polymers, / Pilkington Glass
Supply of steel tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed.
Supply and fix plates ( plain or chequered ) as per IS-3502 ( Base IS-10748 Gr-II ) square or rectangular cut or notched ( ordinary and counter shunk ) forming holes , without any attachment complete all as specified and as directed . Make:- for item Nos. 113 & 114:- Make:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyam metallics and energy ltd / Jinda
Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut of length n.exc 5 cm and 5 to 10mm dia of neck complete all as specified and as directed.
Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions Make:- M/S RR Ceiling Product / Armstrong / India Gypsum / Lafarge / Gypstone / Saint Gobain / Everest.
Extra over item 116 for any sunk or raised moulding
Material and labour for applying two coats of exterior emulsion paint, first quality, over a coat a coat of of alkali resistant primer to walls etc complete all as specified and as directed
M&L for applying wall care putty and appling two coats of Plastic emulsion paint, first quality, over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed.
M&L for applying wall care putty and appling two coats of Plastic emulsion paint, first quality, over a coat of alkali resistant primer to new ceiling surface complete all as specified and as directed. Make for item Nos. 118 to 120:- Asian / Berger / Jenson & Nicholson / Shalimar.
Material and labour for ATT in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and as directed .
Material and labour for ATT to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed .
Material and labour for ATT to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed .
Material and labour for ATT to the soil along with external perimeter of bldg at the rate of 2.25 litres of emulsion per metre of the perimeter wall complete all as specified and as directed. Make for item nos. 121 to 124:- Chlorpyriphos 20% EC M/s Dadson Associates, M/s ABJ Pest Control, Room No.14, Kancharapara , WB
Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m in cement morter.
Forming jambs etc to opening (to foregoing items) incld cutting, toothing & properly bonding into old work also facing ,jointing and pointing to match existing work complete in CM 1:6 .
M&L Making good under cills or over arches, lintels and bressummers, including all-pinning when necessary in CM 1:6
M&L 18-19 mm thick granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles complete all as specified and directed.
M&L 20 mm Damp proof course in CM (1:2) to horizontal or vertical surfaces including necessary formwork , including WPC compound as per the manufactureres instruction ( The unit rate quoted shall be deemed to include the cost of WPC)
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside serviceable materials for reuse including making good of the disturbed surfaces, all as specified and directed.
Material and labour for point wiring (surface type) with PVC insulated FRLS(Fire Retardant Low Smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty)double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified and as directed.
All as per item No 131 here in above but for One 3/5pin 6 Amp Socket outlet on the same board with other switches complete all as specified and as directed.
All as per item No 131 here in above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and as directed.
All as per item No 131 here in above but for One call bell point controlled by one bell push switch complete all as specified as directed.
All as per item No 131 here in above but for one light point controlled by two 2 way switch complete all as specified and as directed.
Material and labour for point wiring (surface type) with PVC insulated FRLS(Fire Retardant Low Smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable drawn through and including PVC casing caping (medium duty) double lock type, size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified and as directed. Make for item Nos. 131 to 136:- Make of cable:- Polycab / Finolex / Havells / C&S / KEI / HPL / Mescab / Standard / RR Kabel. Make for Casing-N- Caping:- Plaza / Presto Plast / Precision / M/S AGK Industries.
Supply and fix switch socket combination 5A/16 Amp 5 pin flush type with complete all as specified and as directed.
Supply and fix call bell, AC, 230 volt, single pole including taking down old unserviceable call bell complete all as specified and as directed.
Supply and fix bell push, flush type 6 Amps complete all as specified and as directed.
Supply and fix switch piano flush button 6 Amp single pole, one way complete all as specified and as directed .
Supply and fix Switch socket combination 5 Pin, 6 Amp flush type complete all as specified and as directed..
Supply and fix switch flush type 5 amp, SP two way complete all as specified and as directed
Supply and fix socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.
Supply and fix lamp holder suitable for LED lamp insulated body with back plate for angle/batten fittings complete all as specified and as directed.
Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and as directed.
Supply and fix electronic fan regulator stepped type flush type AC 240 volt Make Anchor or Havells complete all as specified and as directed. Makefor item Nos. 137 & 148:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL / C&S / Standard
Supply & fixing MCB DB (double door) SPN, 4 way sheet steel with 200 Amp rated bus bar, din rail, neutral link and earth bar including taking down old U/S DB with fitting & fixtures all as specified and as directed. Make- Havells Cat No. DHDPSHOSRW04/ L&T Cat No. LTSC04/ C&S Cat No. CSDBSPNPEDD04 / equivalent in Indoasian / HPL / Standard.
Supply & fix in repair C- seies MCB, SPN, 32 amps, 10KA, 240 volts complete all as specified and as directed.
Supply & fix in repair C- seies MCB, SP, 10 amps, 10KA, 240 volts complete all as specified and as directed. Make for item Nos. 148 & 149:- Indoasian / HPL / Standard./ Havells / C&S / HPL / L&T.
Supply and fix in repair LED tube light fitting including LED tube rod of extruded alluminum and PC diffuser and inbuilt driver of 18/20 Watt and two Nos 2nd class hard wood round block and connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fittings complete all as specified and as directed. Make : Havells Cat no. of tube rod CRYSTAL1213T8DSTL20WLED865SGLASS and Fitting(Batten) cat no. REGALBATTENT8UPTO1/22WSSBSWH / equivalent in C&S / bajaj / Jaguar / Century LED/ HPL.
Supply and fix in repair, wall mounting light fitting of compact and decorative energy efficient luminaire with anti glare diffuser and decorative end caps suitable for 1x 9/10 Watt Led Tube and including 9/10 Watt LED Tube Lamp duly pre wired complete with all acessories inculding connection with flexible twin core copper conductor of size 23/0.0076 mm all as specified and as directed. Make: Make : / Havells cat no.LUMILINEBS9WLED840SPCWH / Bajaj Cat No. BCSLB10WH/ Jaguar Cat No. LGLZ01X010XN / equivalent in C&S / bajaj / Century LED/ HPL.
Supply and fixing LED building security light fitting 25 watt energy saving versatile pressure die-cast aluminium IP65 building security luminaire with suitable GI bracket, of medium grade pipe, 32mm dia, 1.2 mtr long, with MS clamps made out of 25x6mm flat, nut bolts washers etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete including taking down old unserceable light fitting all as specified and directed. Make:Century LED Cat no. SPSP025C0918 / Havells Cat No. ENDURAPEARLSL25WLED757SASYTOPCMP / equivalent in C&S / bajaj / Jaguar / HPL.
Supply and fix in repair LED lamp (B22 Base type) of 1x9 W after complete all as specified and as directed. Make: Bajaj/ Havell's/ Philips / Jaguar / C&S / HPL /
Material and labour for sub-main wiring (surface type) with two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC casing caping including taking down old sub main wiring with casing caping all as specified and as directed. (Note:Three run of 6.0sqmm copper conductor+One run conduit shall be measured as one unit i.e Rm). Make of cable:- Polycab / Finolex / Havells / C&S / KEI / HPL / Mescab / Standard / RR Kabel. Make for casing -N- Caping:- Plaza / Presto Plast / Precision / M/S AGK Industries.
Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade), including 20mm dia GI pipe (medium grade) for watering and connected to control switch/ Distribution panel/ feeder pillar etc. as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 5 of SSR Pt I including taking down old earthing complete all as specified as directed
Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 1.6 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one no 1way switch complete all as specified as directed. Note :(i)Cost of cutting of wall, if any, for housing of GI box, and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cutting chases for wiring and making the surface good to match the existing shall be measured and paid separately. Make of cable:- Polycab / Finolex / Havells / C&S / KEI / HPL / Mescab / Standard / RR Kabel. Make for Conduit:- Plaza / Presto Plast / Precision / M/S AGK Industries.
All as per item No. 156 above, but point wiring with cable 2.5 sqmm size.
All as per item No. 156 above, but for One 3/5pin 6 Amp Socket outlet on the same board with other switches complete all as specified and as directed.
All as per item No. 156 above, but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and as directed.
Supply and fix Ceiling Fan of 1400 mm sweep,5 star rating,230 Volt AC single phase, including mounting S type Rod and conection with flexible wire of suitable size all as specified and as directed.(Make:USHA/Havells/Bajaj)
Supply and fix LED lamp (B22 Base type) of 1x7 W complete all as specified. Make:Crompton/RHINO /Philips/ Jaguar.
Supply and fix 2 ft x 2 ft recess/surface mounted luminaire suitable for grid ceilling /suspended from ceiling complete with electronic driver for 1 x 36 W LED luminarries and including 36 W LED Lamp duly pre wired complete with all acessories inculding connection with flexible twin core copper conductor of size 23/0.0076 mm complete all as specified and as directed. Make: Havells Cat No.PLUTONEO2X2PLR34WLED857S / / jaquar Cat No. LSVR01S036CSC/ equivalent in Century / HPL / C&S / Bajaj
Supply and fix sheet metal enclosure /TPN DBs (Double door) 4 way with 200 amps rated busbar suitable for MCB enclosure one complete all as specified as directed. Make:Havells Cat No DHDNTHCDRW04 / Indoasian 811856/ C&S Cat No. CSDBTPNHDD04SN.
Supply and fix MCB triple pole & neutral 63 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections suitable with proper size of aluminium lugs complete all as specified as directed. Make Havells Cat No. DHMGCTNF063/ INDOASIAN Cat No. 811220/ ABB Cat No. SH203M-C63NA
Supply and fix powder coated sheet metal enclosure single pole & neutral DBs (Double door) 12 way with 200 amps rated busbar DIN channel, neutral link & earth link superline complete all as specified as directed. Make: Havells Cat No. DHDPSHOSRW12/ LTSC 12N of L&T/ C&S Cat No. CSDBSPNPEDD12.
Removing surplus soil to a distance not exceeding 50 mtrs and depositing where directed including spreading, leveling at a level not exceeding 1.5 mtr from the starting point complete all as specified and as directed
Material and labour for sand coushioning with clean dry sand in trenches for cable protection complete all as specified and as directed
Supply and lay sub class 'B' bricks dry in trenches for cable protection laid with its longitudinal axis perpendicular to the cable axis complete all as specified and as directed
Supplying, Laying,connecting,testing and commissioning of XLPE insulated and PVC sheathed ,armoured heavy duty UG cable with stranded alluminium conductors 25.0 sqmm x 4 core,1100 Volt grade, laid in trenches ,complete all as specified and as directed. Note :- (i) Pipe and bricks for cable protection and sand cushioning and earth work shall be measured and paid separately. Makes: Havells / Nicco / KEI / Polycab / Dyanamic Cables ./ RR Kabel / HPL / Mescab.
Supply and fix galvanised iron pipe in 40 mm bore, light grade for protection of UG cable, laid in trenches etc including complete all as directed. Makes:-Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal / Nezone / M/S BST Infratech Ltd.
Supply and fix galvanised iron pipe in 40 mm bore, light grade for protection of UG cable, fixing to pole/wall/Floor with MS clamp,nut, bolt etc complete all as directed. Makes:-Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal / Nezone / M/S BST Infratech Ltd.
Cutting hard standing / road not exceeding 30cm wide and not exceeding 30 cm depth for laying of cable / protection pipe with PCC (1:4:8) type D-2 (using 40 mm graded aggregate) for filling and making good of disturbed surfaces of road/hard standing etc complete all as specified and as directed.
Cutting chases for concealed water tubing or concealed conduit wiring, etc. in brick walls and making good in cement mortar (1:3), cutting exceeding 10cm & not exc 20 cms girth, etc complete all as specified and as directed.
Shanti Construction Company
M/S SHEKHAR TRADING CORPORATION
PUTUL CONSTRUCTION CO.
MASTER BUILDERS
ELECTRO COMMERCIAL CO
NUPUR CONSTRUCTION
BHARUKA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .