Supply Installation and Fixing AMF PANEL for 75KVA D.G Set shall be made out of GRP Glass. fiber reinforced polyester SMC as per EN 14598. 1. UP FR2 material with Protection class IP 54.

Supply, Installation and Fixing AMF PANEL for 75KVA D.G Set shall be made out of GRP, Glass. fiber reinforced polyester SMC as per EN 14598. 1. UP FR2 material with Protection class IP 54. Protection class II (EN 61140) when correctly installed on the base and Panel internal size should be not less than 590mm x 800mm x 250 mm. The Panel box shall have shall be equipped with GRP handle lock with THREE point locking mechanism and the provision to insert various type of locking cylinders provided to avoid unauthorized access. The Panel Stand Angle Iron of 50x50x5mm and Copper Bus. bar with Heat Shrinkable Sleeves of capacity 100 Amp, TPN. Start/Stop Push Buttons, Auto/Manual Selector Switches, wiring of Panel with suitable size of Copper Conductor Cable, Thimbles, etc. having size of the Panel suitable for fixing the Items/Materials mentioned at here. in. below, complete all as specified and as directed INCOMMING. a). MCCB 125Amp 4P 25KA with Thermal and magnetic released with spreader links . 2 Nos ( Main & D.G ) b). 125 Amp Contactors . 2 Nos c). LED indicator R/Y/B . 3 Sets d). Multi. functional Meter ( Volt,Amp,frequency ) with 3 Nos CT Coils 125/5A . 1 No e). Battery Charger 12V . 10Amp . 1 No f). Control MCB SP 2Amp. 6 Nos g). SM 500 Relay . 2 Nos h). On Delay Tmer . 2 Nos i). 8 Pin Relay . 1 Nos j). On Load Manual Changeover Switch 125Amp 4P for bypass Note. AMP Panel with Complete all accessories for Command to D.G Auto Start/Stop and convert in D.G and Electricity. arrangement . 2 Nos